共查询到19条相似文献,搜索用时 218 毫秒
1.
聚酯纤维在世界合成纤维产量中居于首位,我国聚酯纤维的产量亦逐年大幅度增加,因此进一步开发聚酯纤维的应用已成为当前迫切的任务。据国内外市场的调研,利用聚酯纤维加工仿毛织物是今后开发纺织新产品的重要途径。下面根据聚酶纤维的结构和性能阐述提高聚酯长丝织物的仿毛效果。一、聚酯长丝和羊毛化学结构和性能的对比 1.羊毛大分子的化学结构和性能我们用聚酯长丝加工仿毛织物必须了解羊毛大分子的结构、性能和毛织物的加工技术,只有这样对设计仿毛织物和制定染整工 相似文献
2.
3.
正就"超仿棉聚酯纤维及其纺织品产业化技术开发"项目,武术芳主要介绍了亲水型超仿棉聚酯纤维和多孔可控型超仿棉聚酯纤维。前者通过聚合改性,在聚酯大分子中引入亲水基团,赋予纤维良好的亲水性,可集抗紫外、抗菌、吸湿速干等多种功能于一体,尤其适合加工各种高档户外运动服产品;后者采用特殊改性材料及纺丝技术,纤维表面 相似文献
4.
5.
本文主要介绍了近几年国内外聚酯行业在合成技术、纤维产品开发以及市场应用等方面的发展与展望。其中,合成技术中,提高单线聚合产能的三釜流程技术,减少合成工艺步骤、提高工艺柔性化的2R、MTR、CC-PET等技术使聚酯生产的能耗和投资进一步降低;而回收再生技术、直接纺技术、非织造生产技术、液相增黏技术和在线改性技术等使聚酯纤维的市场竞争力得到进一步提高。因此,尽管原油价格和区域经济经历波动和不平衡,全球聚酯产业依然以3%的速度增长。从应用来看,目前全球新增聚酯产能大部分集中于瓶用、膜用和工程塑料等领域。未来,应通过优化上游原料结构,持续的新技术、新产品开发以及开拓新应用市场提升传统聚酯产业的竞争力。 相似文献
6.
7.
大电机用绝缘适形材料是采用聚酯、芳砜纶等纤维经针刺法生产的非织造布产品,用于一般温度部位的通常采用聚酯纤维。本文论述该产品在国内外的生产现状、工艺过程、技术关键以及应用效果。 相似文献
8.
9.
10.
涤纶以及新型聚酯纤维在非织造布领域的应用 总被引:3,自引:2,他引:3
概述涤纶以及聚酯新纤维PTT、PBT等在非织造布领域的应用前景 ,介绍了上海石化在新产品以及功能性纤维和聚酯新纤维方面的开发状况 ,提出涤纶和聚酯新纤维在非织造布领域的发展具有三大趋势。随着涤纶和新纤维性能和品种的不断完善和开发 ,其在非织造布领域的应用将会有较大的发展。 相似文献
11.
本文介绍了国内研制成功的白度高、耐升华的新型涤纶荧光增白剂BSB-2的应用性能试验,并与国外同类产品及我国老产品增白剂DT作了对比。 相似文献
12.
涤纶莫代尔亚麻服装面料的开发 总被引:1,自引:0,他引:1
介绍了涤纶莫代尔亚麻服装面料的研制过程、主要工艺反产品性能特点。该产品采用绿色再生纤维素纤维莫代尔与涤纶、亚麻混纺交织,三种纤维的特性得到优化、互补,改善了面料的服用性能,形成独特的产品风格。 相似文献
13.
14.
为了进一步了解竹炭涤纶纤维的力学性能,解决在纺织生产中存在的问题,测试了竹炭涤纶纤维的力学性能,包括直接拉伸性能、非直接(结节、钩接)拉伸性能和松弛性能等;比较了竹炭涤纶纤维与普通涤纶纤维之间的不同;选择了适当的力学模型,应用Origin8.0数据分析软件对竹炭涤纶纤维的非直接(结节、钩接)拉伸性能和松弛性能分别进行拟合,综合分析了实验结果和拟合参数。结果表明:在常温干态条件下,竹炭涤纶纤维的断裂强度、初始模量均低于普通涤纶纤维,断裂伸长和断裂功有所增加;经湿处理后,各项性能较干态时普遍下降。非直接拉伸状态下,竹炭涤纶纤维的断裂强度、断裂伸长、初始模量和断裂功等全部减小;对于竹炭涤纶纤维,多项式模型可以很好地拟合其直接拉伸、结节拉伸和钩接拉伸性能。标准线性固体模型可以很好地拟合竹炭涤纶纤维的松弛性能。 相似文献
15.
Natural fiber-reinforced polyester composites were prepared using bast fibers as the reinforcement which were extracted from Grewia serrulata trees. Chemical treatments such as alkali pretreatment followed by permanganate treatment, acetylation and silane treatment were exclusively applied to modify the fiber surface. Hand lay-up technique with compression molding was adapted for the fabrication of axially oriented fiber reinforced composites. Tensile, flexural and impact strength properties of the specimens prepared were evaluated following the standard procedures. The SEM images of the fractured surfaces shows improvement in compatibility between the chemically treated fibers and the matrix. It was found that the tensile and flexural strengths of chemically treated fiber-reinforced polyester composites have significantly improved when compared to untreated fiber-reinforced polyester specimens. The properties of 1200 hrs water aged specimens were found deteriorated considerably due to diffusion of water into the composite material system. The chemical treatment of fibers prior to fabrication of composites improves the resistance to water absorption tendencies. 相似文献
16.
为制备含磷无卤阻燃聚丙烯腈纤维,利用KOH 水溶液对丙烯腈(AH) 醋酸乙烯酯(VAc)无规共聚物(P(AN?co?VAc))纤维中的VAc单元进行选择性水解,再与O,O?二乙基磷酰氯进行磷酰化反应制得阻燃聚丙烯腈纤维。采用傅里叶变换红外光谱、差示扫描量热和热重分析法对阻燃纤维结构及热性能进行表征,利用扫描电子显微镜对阻燃聚丙烯腈纤维的炭残渣进行分析。结果表明:随水溶液pH值的升高,聚丙烯腈纤维中VAc单元迅速水解;聚丙烯腈纤维中VAc单元的存在使共聚纤维环化放热分解峰值温度增大,当VAc单元的质量分数为30%时,可达287℃,而阻燃聚丙烯腈纤维的该温度高达340℃;阻燃聚丙烯腈纤维在800℃ 时的炭残渣量高达48%以上,远高于共聚合聚丙烯腈纤维41%的残炭量,具有良好的成炭性。 相似文献
17.
The effects of finishes and laundering on the surface characteristics of cotton and polyester fibers are evaluated in this investigation. Changes in the surface properties of the fibers are monitored through contact-angle determinations (the Wilhelmy technique) before and after treatment of the fabrics with durable-press, fluorocarbon stain-repellent, and antistatic finishes. The durable-press and stain-repellent finishes did not produce a noticeable change in the wettability of the cotton fibers. However, the wettability of the polyester fibers was increased, and the polar contribution to the surface free energy increased after treatment with stain-repellent finishes. Treatment of cotton with cationic surfactants as antistatic finishes converted the surface to a hydrophobic character. A reverse phenomenon was observed on the surface of polyester fibers after treatment with antistatic finishes. The different effects of the surfactant treatments were attributed to different deposition patterns of the surfactant molecules at the fiber surfaces. Laundering was found to increase the wettability of unfinished cotton and polyester fibers, presumably owing to surface roughening from mechanical agitation and the removal of oil-borne contaminants. The effect of laundering on the finished fibers was dependent on the retention of the finishes on the fabrics in the laundering process. 相似文献
18.
为了探讨颜料墨水对不同织物喷墨印花的适应性,选用棉、涤纶、蚕丝、天丝、涤/棉、棉/锦、涤/锦/棉等不同纤维种类、不同组织结构的织物,采用自制六色颜料墨水在8 pass,720 dpi打印单色块,分析颜料墨水印花的颜色深度、色牢度、清晰度以及织物风格等性能。实验结果表明:打印织物表面性能是影响喷墨印花性能的主要因素之一;对亲水性纤维,结构紧密的织物可以将墨水贮留在织物表面,打印K/S值大,清晰度高,但牢度略低;对抱水性能较低的稀薄涤纶、蚕丝织物,为了确保喷墨印花的印制精细度,预处理是必要的。 相似文献