Vacuum frying of high-quality fruit and vegetable-based snacks

Sweet potato, green beans, Tommy Atkins mango, and blue potato were fried in a vacuum frying process at a temperature of 120-130 ± 1°C. Before frying, green beans and mango slices were soaked in a 50% maltodextrine 0.15% citric acid solution. The products were also fried in a traditional (atmospheric pressure) fryer at 160-165 ± 1°C for 4 min. A 30-member consumer panel rated the sensory quality of both types of fried snacks using a 1-9 hedonic scale. Compared with traditional frying, oil content of vacuum-fried sweet-potato chips and green beans was 24% and 16% lower, respectively. Blue potato and mango chips had 6% and 5% more oil, respectively, than the traditional-fried samples. Anthocyanin (mg/100 g d.b.) of vacuum-fried blue potato chips was 60% higher. Final total carotenoids (mg/g d.b.) were higher by 18% for green beans, 19% for mango chips, and by 51% for sweet-potato chips. Sensory panelists overwhelmingly preferred (p < 0.05) the vacuum-fried products for color, texture, taste, and overall quality. Most of the products retained or accentuated their original colors when fried under vacuum. The traditional-fried products showed excessive darkening and scorching. These results support the applicability of vacuum frying technology to provide high-quality fruit and vegetable snacks.     

Comparison between atmospheric and vacuum frying of apple slices

Vacuum deep-fat frying is a new technology that can be used to improve quality attributes of fried food because of the low temperatures employed and minimal exposure to oxygen. In this paper atmospheric and vacuum frying of apple slices were compared, in terms of oil uptake, moisture loss and color development. In addition, some apple slices were pre-dried (up to 64% w.b.) before vacuum frying to determine the overall effect. To carry out appropriate comparisons between both technologies equivalent thermal driving forces were used in both processes (ΔT = 40, 50, 60 °C), keeping a constant difference between the oil temperature and the boiling point of water at the working pressure. Vacuum frying was shown to be a promising technique that can be used to reduce oil content in fried apple slices while preserving the color of the product. Particularly, drying prior to vacuum frying was shown to give the best results. For instance, when using a driving force of ΔT = 60 °C, pre-dried vacuum fried slices absorbed less than 50% of the oil absorbed by atmospheric fried ones. Interestingly, a strong relationship between water loss and oil content was observed in both technologies, allowing the extension of observations that have been made for atmospheric frying.     

Quality characteristics of vacuum-fried snacks prepared from various sweet potato cultivars

The effects of vacuum frying and atmospheric frying on the physicochemical properties and quality characteristics of the deep-fat-fried snacks were compared in manufacturing snacks using general, yellow-fleshed, and purple-fleshed sweet potatoes. Regarding the moisture and lipid content of snacks, vacuum-fried snacks showed about 50% lower values compared to atmospheric-fried snacks, while for the colors, vacuum-fried snacks showed higher L and b values and a slightly lower a value, with almost no difference in the texture, compared to atmospheric-fried snacks. The total carotenoid and anthocyanin contents of snacks were decreased greatly compared to fresh sweet potatoes, and was considerably higher in vacuum-fried snacks compared to atmospheric-fried snacks. For the sensory evaluation of snacks, the acceptability for color and flavor was higher in the vacuum-fried snacks, while the acceptability for texture was higher in atmospheric-fried snacks due to a higher degree of crispiness. In conclusion, it is considered that the vacuum frying in manufacturing sweet potato snacks, compared to the atmospheric frying, is the appropriate deep-fat frying method for modern people who take excessive fats and oils from foods and are highly interested in health and high quality products.     

Effects of processing conditions on the quality of vacuum‐fried carrot chips

The effects of pretreatment and vacuum frying conditions on the quality of fried carrot chips were studied. The moisture and oil contents of fried carrot chips were significantly (p < 0.05) reduced when blanched carrot slices were pretreated by immersion in fructose solution and freezing prior to vacuum frying. Furthermore, more uniform porosity was observed on the vertical cross‐section of carrot chips when examined by scanning electron microscopy. During vacuum frying, the moisture content, colour and breaking force of carrot chips decreased while the oil content increased with increasing frying temperature and time. However, there was no apparent change in Hunter ΔE with time when the frying temperature was below 100 °C and the frying time was below 25 min. Results of this study suggest that vacuum frying at moderate temperature (90–100 °C) for 20 min can produce carrot chips with lower moisture and oil contents as well as good colour and crispy texture. Copyright © 2005 Society of Chemical Industry     

Effects of processing conditions on the quality of vacuum fried apple chips

The effects of pretreatment and processing conditions on the quality of vacuum fried apple chips were studied. As blanched apple slices were pretreated by immersing in fructose solution and freezing prior to vacuum frying, more uniform porosity was observed on the surface (or cross-section) of apple chips as examined by scanning electron microscopy (SEM). During vacuum frying, the moisture content and breaking force of apple chips decreased with increasing frying temperature and time while the oil content increased. The L values of fried apple chips decreased apparently with increasing frying temperature. However, when apple slices were fried at 100°C for up to 20 min, both a and b values increased rapidly. Statistical analysis with the central composite rotatable design showed that the moisture content, oil content, color, and breaking force of apple chips were significantly (P⩽0.05) correlated with concentration of immersing sugar solution, frying temperature and frying time. Based on surface responses and contour plots, optimum conditions were: vacuum frying temperature of 100–110°C, vacuum frying time of 20–25 min, and immersing fructose concentration of 30–40%.     

Effect of Osmotic Dehydration and Vacuum-Frying Parameters to Produce High-Quality Mango Chips

ABSTRACT:  Mango ( Mangifera indica  L.) is a fruit rich in flavor and nutritional values, which is an excellent candidate for producing chips. The objective of this study was to develop high-quality mango chips using vacuum frying. Mango (" Tommy Atkins ") slices were pretreated with different maltodextrin concentrations (40, 50, and 65, w/v), osmotic dehydration times (45, 60, and 70 min), and solution temperatures (22 and 40 °C). Pretreated slices were vacuum fried at 120, 130, and 138 °C and product quality attributes (oil content, texture, color, carotenoid content) determined. The effect of frying temperatures at optimum osmotic dehydration times (65 [w/v] at 40 °C) was assessed. All samples were acceptable (scores > 5) to consumer panelists. The best mango chips were those pretreated with 65 (w/v) concentration for 60 min and vacuum fried at 120 °C. Mango chips under atmospheric frying had less carotenoid retention (32%) than those under vacuum frying (up to 65%). These results may help further optimize vacuum-frying processing of high-quality fruit-based snacks.     

Application of Vacuum Frying as a Furan and Acrylamide Mitigation Technology in Potato Chips

Consumers like fried snacks, and taste, color, and texture are key aspects in their preference. However, during frying of foods some toxic compounds, such as furan and acrylamide, are produced. The objective of this work was to mitigate furan and acrylamide formation in potato chips, without affecting their main quality attributes, by using vacuum frying. To accomplish this purpose, potato slices were fried at atmospheric (P _abs 29.92 inHg) and vacuum conditions (P _abs 3.00 inHg), using equivalent thermal driving forces (T _{water boiling point} ? T _oil = 50, 60, or 70 °C). Furan and acrylamide concentration, oil content, and texture of both atmospheric and vacuum-fried samples were determined. Vacuum-fried potato chips showed reductions of about 81, 58, and 28% of furan, acrylamide, and oil content, respectively, when compared to their atmospheric counterparts. Additionally, the texture was not affected (p > 0.05) by changes in the pressure during frying. Results clearly showed that vacuum frying is an effective technology for furan and acrylamide mitigation in potato chips, since it reduces the content of both contaminants and preserves the quality attributes of fried snacks.     

Use of natural antioxidants in refined palm olein during repeated deep-fat frying

An optimization study on the use of oleoresin rosemary extract, sage extract and citric acid added into refined, bleached and deodorized (RBD) palm olein before deep-fat frying of potato chips was performed using a constrained mixture design. Results revealed that the use of these natural antioxidants could improve the sensory acceptability of potato chips during a 5-day repeated deep-fat frying. All three antioxidants significantly (P<0.05) improved the sensory characteristics, including appearance, taste, crispiness, odor and overall acceptability. After day 5 of frying, the most acceptable fried potato chips were those fried in oil containing a combination of 0.059% oleoresin rosemary extract, 0.063% sage extract and 0.028% citric acid. The natural antioxidants significantly (P<0.05) lowered the rate of oxidation of oil during deep-fat frying and contributed to measured sensory acceptability of fried potato chips.     

Quality changes of edible oils during vacuum and atmospheric frying of potato chips

Demand for safe and nutritionally rich fried products is gaining a momentum among consumers, leading to the increased consumption of vacuum fried products. The impact of vacuum frying (VF)(110 °C, 40 kPa) on chemical composition of food, fatty acid profile, microstructure, oxidative stability and sensory attributes was assessed and differentiated with that of atmospheric frying(AF) (180 °C). The potato slices were fried in mustard and soyabean oil used repetitively for 25 h. The oil content of VF potato chips was lower (15.18%) than AF chips (18.98%), however water loss in AF chips was higher than VF chips by 1.63-fold. VF significantly prevented the PUFA degradation, minimizes transfatty acid (TFA) formation and maintain a low C18:2/C16:0 ratio as compared to AF. VF Chips fried in soyabean oil show an increase in TFA content from 2.15 to 2.63% and a decrease in PUFA from 51.57 to 45.16% as compared to AF chips where TFA content increased from 2.15 to 3.72% and PUFA shows a higher reduction from 51.57 to 37.69% at the end of 25 h of frying. This indicate that in AF, oil is safe for use upto 10 cycles of frying, while as in VF, the same oil can be used for upto 40 cycles of frying without quality deteoriation. Sensorial analysis revealed that VF chips retain a better colour, taste and flavour but were less crispy than that of AF chips. These findings validate the application of vacuum frying technology for the production of high-quality foods with lesser degradation of frying oil.Industrial relevanceFood manufacturers are now impelled by the health-conscious consumer base for the production of healthy food products. The toxic effect of foods fried in degraded oils on human health is now widely known and thus the production of safe fried foods is the need of hour globally. In this context, vacuum frying is the most feasible approach for the production of quality fried products retaining the natural colour, flavour, sensory and nutritional properties better than that of atmospheric frying. Vacuum frying causes the least degradation of fatty acid of the frying oil and the fried potatoes, producing healthy potato chips. Therefore, the oil used for vacuum frying have a greater shelf life and oxidative stability than atmospheric frying. However, the higher installation cost of vacuum fryer still limits its use in the street fried food market, where degradation of oil is more likely. Thus, for its widespread commercialisation in developing countries, steps should be taken both by government and manufacturing companies to reduce the installation costs.     

Color changes and acrylamide formation in fried potato slices

The objective of this work was to study the kinetics of browning during deep-fat frying of blanched and unblanched potato chips by using the dynamic method and to find a relationship between browning development and acrylamide formation. Prior to frying, potato slices were blanched in hot water at 85 °C for 3.5 min. Unblanched slices were used as the control. Control and blanched potato slices (Panda variety, diameter: 37 mm, width: 2.2 mm) were fried at 120, 150 and 180 °C until reaching moisture contents of ∼1.8% (total basis) and their acrylamide content and final color were measured. Color changes were recorded at different sampling times during frying at the three mentioned temperatures using the chromatic redness parameter a¹. Experimental data of surface temperature, moisture content and color change in potato chips during frying were fit to empirical relationships, with correlation coefficients greater than 90%. A first-order rate equation was used to model the kinetics of color change. In all cases, the Arrhenius activation energy decreases alongside with decreasing chip moisture content. Blanching reduced acrylamide formation in potato chips in ∼64% (average value) in comparison with control chips at the three oil temperatures tested. For the two pre-treatments studied, average acrylamide content increased ∼58 times as the frying temperature increased from 120 to 180 °C. There was a linear correlation between acrylamide content of potato chips and their color represented by the redness component a¹ in the range of the temperatures studied.     

Reduction of Acrylamide Formation in Potato Chips by Low-temperature Vacuum Frying

ABSTRACT: Potatoes and other foods that have a high content of the amino acid asparagine and a high accumulation of reducing sugars are subject to the formation of acrylamide upon frying. The objectives of this research were (1) to analyze the level of acrylamide formed during deep-fat frying of potato chips and (2) to evaluate means of reducing acrylamide in potato chips by using different potato cultivars and vacuum frying. Several potato cultivars were used in this research, including Innovator (I), NDTX 4930–5W (N), ATX 854 04–8W (ATw), Atlantic (A), Shepody (S), ATX847806–2Ru (ATr), and White-Rose (W). An electric bench-top (atmospheric conditions)-type fryer was used to fry the potatoes. Three temperatures were used: 150 °C, 165 °C, and 180 °C. The vacuum frying experiments were performed at 118 °C, 125 °C, and 140 °C and a vacuum pressure of 10 Torr. The potatoes were sliced (1.5-mm thick) and fried for different lengths of times. For potatoes fried at 165 °C (for 4 min) at atmospheric conditions, the acrylamide contents were 5021 ± 55 ppb (W), 552 ± 25 ppb (I), 358 ± 50 ppb (N), 397 ± 25 ppb (ATw), 646 ± 55 ppb (A), 466 ± 15 ppb(S), and 537 ± 14 ppb (ATr). Vacuum frying reduced acrylamide formation by 94%. Results showed that both cultivar and modified frying systems can play an important role in reducing acrylamide formation in fried potatoes. As the frying temperature decreased from 180 °C to 165 °C, acrylamide content in potato chips reduced by 51% during traditional frying and by 63% as the temperature decreased from 140 °C to 125 °C in vacuum frying. Increased frying time increased acrylamide formation during traditional frying for all temperatures and frying methods analyzed. However, the effect on acrylamide concentration was greater for the traditional frying than the vacuum frying. Keywords: acrylamide, vacuum, frying, potato, temperature     

DEEP-FAT FRYING OF YAM SLICES: OPTIMIZATION OF PROCESSING CONDITIONS USING RESPONSE SURFACE METHODOLOGY

The deep-fat frying of yam slices was investigated with the aim of optimizing the processing conditions. During frying, frying temperature, initial dry matter and frying time have a significant effect on moisture loss and oil uptake. Response surface methodology central composite rotatable design was used to study the effects of the independent variables on quality attributes of yam chips. Breaking force, oil content, moisture content and color parameters were determined. Statistical analysis with response surface regression showed that breaking force, oil and moisture contents and color parameters ( L* and a* ) were significantly ( P <  0.05) correlated with frying temperature, initial dry matter and frying time. The optimum conditions were a frying temperature of 175–180C, using tubers of initial dry matter of 0.179–0.214 kg/kg with a frying time of 4–5 min. It was suggested that the regression equation can be used to estimate the dependent variables for fried yam chips except b* (yellowness) parameter.

PRACTICAL APPLICATIONS

It is expected that the optimized processing conditions highlighted in this work will be useful in obtaining fried yam chips of acceptable quality attributes. This optimized condition would be a good prospect for commercialization in small-scale industries.     

Oil uptake and texture development in fried potato slices

The objective of this work was to study oil absorption and the kinetics of texture development of fried potato slices during frying. Prior to frying, potato slices were blanched in hot water at 85 °C for 3.5 min. Unblanched slices were used as the control. Control and blanched potato slices (Panda variety, diameter: 37 mm, width: 2.2 mm) were fried at 120, 150 and 180 °C until reaching moisture contents of 1.8% (total basis) and their texture and oil content were measured periodically. Oil uptake was higher in 15% for blanched samples than for control samples after 20 s of frying. Besides, the higher the frying temperature, the lower the oil absorption in control samples. Textural changes in fried potato slices were followed by the parameter maximum force (MF) extracted from the force vs. distance curves corresponding to different sampling times. Normalized maximum force (MF*) was used in modeling textural changes in the potato slices during frying in both the initial tissue softening process and the later crust development process. Higher temperatures accelerated these processes; however neither the temperature nor the pre-treatment had a significant effect (P > 0.05) over the final texture of the fried potato chips.     

SHELF-LIFE OF FRIED POTATO CHIPS USING RBD PALM OLEIN, SOYBEAN OIL AND THEIR BLENDS

Shelf-life of potato chips fried in refined, bleached and deodorized palm olein (RBDPO), soybean oil (SBO) and their blends was evaluated. Potato slices were fried for 130 s at 180 PT 5C at 30 min intervals over a period of 5 h/day for 5 consecutive days. Indicators of frying oil quality with the shelf-life of fried products chosen were total polar component and acid value. This study indicated that RBDPO was better than SBO for the preparation of fried potato chips in terms of shelf-life of products. The blends were also slightly better than SBO with increasing proportion of RBDPO. However, the effects were minimal on the rate of development of rancidity in fried products beyond the fourth day of frying in the frying medium.     

低温真空油炸薯片生产工艺及其贮藏条件的研究

对马铃薯片进行低温真空油炸生产工艺的基础性研究,分析薯片在贮藏过程中水分、脂肪和VC含量的变化,并探讨等温吸湿规律。通过单因素试验确定最优的油炸工艺参数为温度105℃,时间20min,真空度0.090MPa;离心脱油的最佳条件为脱油转速400～500r/min,时间5～7min,真空度0.090MPa。研究结果对低温真空油炸薯片技术具有很好的指导和促进作用,同时改善了现在油炸薯片的品质和提高了能源利用率。     

Lipid Oxidation and Carotenoids Content in Frying Oil and Fried Dough Containing Carrot Powder

ABSTRACT: Lipid oxidation and carotenoids in frying oil and carrot-added dough during frying were studied. Flour dough containing carrot powder was sheeted at 0.1 cm thickness and was then cut to squares to be fried. Each frying was performed in 160°C soybean oil for 1 min and repeated every 20 min for 20 h. Carrot in the dough decreased significantly the oxidative stability of frying oil and fried dough (p < 0.05). Carotenoid content in frying oil increased as frying was repeated due to dissolution of carotenoids from the dough containing carrot; however, there was no significant difference in carotenoid content among the dough fried in the oil with different number of fryings.     

几种高油脂食品等温吸湿规律的研究

研究了真空油炸莲子、真空油炸胡萝卜脆片、常压油炸胡萝卜脆片、常压油炸土豆脆片4种高脂食品的吸湿等温曲线。根据常用的5种等温吸附模型对4种物料的吸湿实验数据进行了拟合,比较了其拟合程度(R2)。结果表明,25℃条件下,4种高脂物料最适合的等温吸附模型都是Peleg模型,且拟合程度依次为真空油炸胡萝卜脆片、常压油炸胡萝卜脆片、真空油炸莲子、常压油炸土豆脆片。     

真空油炸胡萝卜脆片基本特性的研究

真空油炸技术可用于生产高品质的果蔬脆片．主要研究了油炸温度和真空度对胡萝卜片水分质量分数、脂肪质量分数、色泽及质构的影响．试验表明：随着油炸温度和真空度的升高，其干燥和脂肪吸收速度相应提高，且两者呈一定的相关性．统计分析可知：油炸温度和真空度并不显著性影响脆片的白度（L）、红度（a）、黄度（b）值（P〉0．05）；对于脆片的破碎力而言，真空度具有显著性影响（P〈O．05），而油炸温度不具有显著性影响（P〉0．05）．     

The optimization of vacuum frying to dehydrate carrot chips

The effects of pretreatment and processing conditions, such as frying temperature, absolute vacuum pressure and frying time; on the properties of fried carrot chips were studied. Statistical analysis with response surface regression showed that moisture content, fat content and breaking force of carrot chips were significantly (P < 0.05) correlated with frying temperature, vacuum absolute pressure and frying time. The optimum conditions were a vacuum frying temperature of 100–110 °C, a vacuum absolute pressure of 0.010–0.020 MPa and a frying time of 15 min.     

EVALUATION OF THE TEXTURE OF FRIED POTATOES

Texture of potatoes with different shapes (slices and strips) were evaluated after frying and in some cases after baking. Blanched and unblanched potato slices (Bintje variety) were fried at four oil temperatures: 160, 170, 180 and 190C until reaching a moisture content of ∼1.7%. A puncture test with three point support for the slices was applied to measure the texture of potato chips using the following parameters extracted from the force versus distance curves: maximum force of break (MFB) and deformation of break (DB). These two parameters were useful to follow the changes in texture of the fried slices with moisture content at different frying temperatures. Blanched and unblanched potato strips were partially fried at 160C and 190C for 60, 90 and 120 s. The par-fried potatoes were frozen at -20C for one day after which they were baked at 200C for 15 min. The texture of the baked potato strips was evaluated using a bending test with two support points. From the force versus distance curves, two parameters were extracted: maximum force of deformation (MFD) and maximum deformation (MD). Significant higher MFB and lower DB values (P > 0.1) for unblanched fried slices indicate that these are crispier than blanched chips for moisture contents lower than 4% (6.59 N and 0.62 mm vs 5.74 N and vs 0.75 mm for unblanched and blanched chips, respectively, average values for the four frying temperatures employed). There was no effect of the frying temperature and the pretreatment (blanching or unblanching) on the texture of the frozen par-fried potatoes after baking when compared at the same residual moisture content, but blanched potato strips lost moisture more slowly both in frying and in baking.