2014 China International Paper Technology Exhibition and Conference (CIPTE) Will Be Held in Shanghai

In order to promote the development of China＇ s paper industry, display the technical achievements of paper industry, and provide a communication platform for the enterprises of paper and relative industries, China Paper Association, China Technical Association of Paper Industry and China National Pulp ＆ Paper Research Institute will jointly host 2014 China International Paper Technology Exhibition and Conference in Shanghai World Expo Exhibition ＆ Convention Center, Shanghai, China on September 3-5, 2014.     

2014 China International Paper Technology Exhibition and Conference(CIPTE) Will Be Held in Shanghai

In order to promote the development of China＇s paper industry, display the technical achievements of paper industry, and provide a communication platform for the enterprises of paper and relative industries, China Paper Association, China Technical Association of Paper Industry and China National Pulp ＆ Paper Research Institute will jointly host 2014 China International Paper Technology Exhibition and Conference in Shanghai World Expo Exhibition ＆ Convention Center, Shanghai, China on September 3-5, 2014.     

英文摘要

＂CPPI 2014 Paper Industry High-level Summit＂ and ＂China Pulp Week 2014＂ were held respectively at Jinan and Shanghai, on 18-19 Mar. and 25-26 Mar., which of the two comferences built a high- level communication platform for the world paper pulp and paper industry. Under the situation of slow growth of global economy and the stategy transition stage of China paper industry, almost all in paper industry, including industrial leaders, experts and CEOs in enterprises, pay attention to thedevelopment strategy of paper industry.     

2017 China International Paper Technology Exhibition and Conference (CIPTE) Will Be Held in Shenzhen Convention & Exhibition Center on September 13-15th, 2017

In order to promote the development of China’s paper industry, display the technical achievements of paper industry, and provide a communication platform for the enterprises of paper and relative industries, 2017 China International Paper Technology Exhibition and Conference (CIPTE) will be held in Shenzhen Convention & Exhibition Center, Shenzhen, Guangdong Province, China on September 13-15th, 2017.     

2017 Top Ten News of China''s Paper Industry

正On December 26~(th),2017,the meeting on the selection of the 2017 top ten news of China’s paper industry,sponsored by China Paper Newsletters,was held in China National Pulp and Paper Research Institute Co.,Ltd.,Beijing.The yearly selection of the top ten news,which began in 2000,has become a brand activity within the industry and is widely accepted and greatly appreciated throughout due to the care and support from leaders at all levels and industry colleagues as     

2016 Top Ten News of China''s Paper Industry

正On December 23~(rd),2016,the meeting on the selection of the 2016 top ten news of China’s paper industry,sponsored by China Paper Newsletters,was held in China National Pulp and Paper Research Institute,Beijing.The yearly selection of the top ten news,which began in 2000,has become a brand activity within the industry and is widely accepted and     

Focus on China''s Paper Industry

正2017 was a year of rejoicing for the China’s paper industry!During the year,most paper companies in China sang all the way,and whose profits boosted by the sharp rise in paper prices.According to the statistics released by the National Bureau of Statistics,     

2015 Top Ten News of China's Paper Industry

On December 18th, 2015, the meeting on the selection of the 2015 top ten news of China''s paper industry, sponsored by China Paper Newsletters, was held in China National Pulp and Paper Research Institute, Beijing. The yearly selection of the top ten news, which began in 2000, has become a brand activity within the industry and is widely accepted and greatly appreciated throughout due to the care and support from leaders at all levels and industry colleagues as well as the attention of warm hearted reading public.     

Announcement of Approval and management for Imported Waste Paper

In order to promote adjustment of industry structure, improve the energy conservation and pollutant reduction, regulate the utilization and pollutant treatment of imported waste paper, SEPAC releases Announcement of the approval and management of imported waste paper according to the regulation of ＂Law of the People＇s Republic of China on prevention and control of environmental protection by solid waste＂,     

"China Paper 2013" Will Be Held in September

China Technical Association of Paper Industry and China Pulp and Paper Research Institute will jointly organize one-day international paper technical conference " China Paper 2013 " at the Kempinski Hotel on September 24th,2013. "China Paper 2013" is one of the most influential and popular academic event of China's papermaking industry.The conference will invite domestic and abroad experts to deliver presentations on current hot issues.The participants can learn more about the achievements and developments trend of China' s and international paper industries.All of scientists engineers,management persons,students of paper and related industries are most welcome to attend the conference.     

Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

Contribution of European research to risk analysis

The European Commission's, Quality of Life Research Programme, Key Action 1—Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches; harmonization of risk assessment principles, methodologies, and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries; to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women; evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.     

低温带皮菜籽粕微粉的不同粒级部分的功能特性

为研究低温带皮菜籽粕微粉的不同粒级部分的功能特性,以经低温脱脂的带皮菜籽粕为原料,经微粉碎后筛分成212~425μm、150~212μm和106~150μm的3个不同粒级的微粉样品,检测这些样品的吸水性、吸油性、乳化性和乳化稳定性、蛋白质体外消化率。结果表明:1 3个不同粒级的微粉样品之间的粗纤维含量存在显著差异,表明三者的结构组成成分有一定差异。23个微粉样品的乳化活性和乳化稳定性随粒度级别的减小而显著增加(P0.01)。33个微粉样品的蛋白质体外消化率随粒度级别的减小而显著增加(P0.01)。4不同粒级带皮菜籽粕微粉样品的吸水性与吸油性受其结构组成物质不同和粒度的双重影响,与粒度的相关性不明显。     

Microbiology of food taints

Fresh and processed foods are often spoilt by the presence of undesirable flavours and odours caused by microbial action. The aim of this paper is to review the current knowledge of microbiologically induced taints that occur in a wide range of foodstuffs, including meats, poultry, fish, crustaceans, milk, dairy products, fruits, vegetables, cereals and cereal products. Examples have been chosen where the compounds responsible for the taint have been identified and sufficient data obtained to demonstrate the involvement of microorganisms. However, in some cases the full identity of the causative organism may not have been elucidated. The types of microorganisms covered by this review include bacteria, fungi, yeasts, actinomycetes and cyanobacteria. Although cyanobacteria do not in general infect foods, their presence in aqueous systems and water supplies can lead to off-flavours in aquatic organisms and processed foodstuffs. Several examples of each of these processes are discussed. Wherever possible, the likely biosynthetic pathway used by the microorganism to produce the offending compound in a foodstuff is indicated.     

Analysis for organic residues from aids to polymerization used to make plastics intended for food contact

Polymers intended for food contact use have been analysed for organic residues which could be attributed to a range of substances employed as polymerization aids (e.g. initiators and catalysts). A wide range of polymers was extracted with solvents and the extracts analysed by gas chromatography-mass spectrometry (GC-MS). The overwhelming majority of substances identified were not derived from aids to polymerization but were oligomers, additives and adventitious contaminants. However, a small number of substances were identified as initiator residues. These included tetramethylsuccinonitrile (TMSN) which was observed in two polymers and it derived from recombination of two azobisisobutyronitrile (AIBN) initiator radicals. Methyl benzoate, benzoic acid, biphenyl and phenyl benzoate were detected in one poly(methyl methacrylate) sample and in two polyvinylchlorides and they are thought to be derived from benzoyl peroxide initiator. TMSN was subsequently targeted for analysis of poly-(methyl methacrylate) plastics using proton nuclear magnetic resonance spectrometry (¹     

Tests of potential functional barriers for laminated multilayer food packages. Part II: Medium molecular weight permeants

Experiments were performed to characterize the kinetics of the permeation of different medium molecular weight model permeants: bisphenol A, warfarin and anthracene, from liquid paraffin, through a surrogate potential functional barrier (25 microns-thick orientated polypropylene--OPP) into the food simulants olive oil and 3% (w/v) acetic acid. The characterization of permeation kinetics generally observed the permeation models previously reported to explain the experimental permeation results obtained for a low molecular weight group of model permeants. In general, the model permeants exhibited behaviour consistent with their relative molecular weights with respect to (a) the time taken to attain steady-state permeation into the food simulant in which they were more soluble, (b) their subsequent steady-state permeation rates, and (c) their partition between liquid paraffin and the OPP membrane.     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. I: Interlaboratory studies of methods of analysis

This paper describes the first part of a project undertaken to develop mussel reference materials for Paralytic Shellfish Poisoning (PSP) toxins. Two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin (STX) and decarbamoyl-saxitoxin (dc-STX) in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the second part of the project: the certification exercise. In the first study, 18 laboratories were asked to measure STX and dc-STX in rehydrated lyophilized mussel material and to identify as many other PSP toxins as possible with a method of their choice. In the second interlaboratory study, 15 laboratories were additionally asked to determine quantitatively STX and dc-STX in rehydrated lyophilized mussel and in a saxitoxin-enriched mussel material. The first study revealed that three out of four postcolumn derivatization methods and one pre-column derivatization method sufficed in principle to determine STX and dc-STX. Most participants (13 of 18) obtained acceptable calibration curves and recoveries. Saxitoxin was hardly detected in the rehydrated lyophilized mussels and results obtained for dc-STX yielded a CV of 58% at a mass fraction of 1.86 mg/kg. Most participants (14 out of 18) identified gonyautoxin-5 (GTX-5) in a hydrolysed extract provided. The first study led to provisional criteria for linearity, recovery and separation. The second study revealed that 6 out of 15 laboratories were able to meet these criteria. Results obtained for dc-STX yielded a CV of 19% at a mass fraction of 3.49mg/kg. Results obtained for STX in the saxitoxin-enriched material yielded a CV of 19% at a mass fraction of 0.34mg/kg. Saxitoxin could not be detected in the PSP-positive material. Hydrolysis was useful to confirm the identity of GTX5 and provided indicative information about C1 and C2 toxins in the PSP-positive material. The methods used in the second interlaboratory study showed sufficiently consistent analysis results to undertake a certification exercise to assign certified values for STX and dc-STX in lyophilized mussel.     

Focus on China's Paper Industry

In the English section of this issue, 〈China Paper Newsletters〉 will introduce ＂National Development and Reform Commission Issued Announcement for Selection of Major Preliminary Research Projects for the ＇13th Five-Year Plan＇＂, ＂2013 Annual Report of China＇s Paper Industry＂, and news of projects and other policies.     

Listen to downstream & search for innovation

正Nowadays,textile enterprises are all taking efforts in transformation and upgrading,like improving producing capacity and optimizing production structure to face market downturn.It claimed a higher request to the standard of textile equipments.In the upcoming of ITMA ASIA+CITME 2014exhibition,this magazine have interviewed several branch associations and a series of relative enterprises,to summarize industrial developing status