共查询到20条相似文献,搜索用时 78 毫秒
1.
黄强 《精密制造与自动化》2013,(2)
介绍了ISO 9001质量管理体系的要求,对机床企业产品设计和开发的质量控制。从设计和开发策划、设计和开发输入、设计和开发输出、设计和开发评审、设计和开发验证、设计和开发确认、设计和开发更改的控制等七个方面进行了探讨和叙述;总结了机床制造企业参与ISO9001质量管理体系的工作经验,可供产品设计和管理人员参考。 相似文献
2.
3.
4.
5.
6.
本文介绍互感分压器和分流器的结构、误差和实际应用。二者的结构和误差计算公式相同,因而有的仪器可分别作为分压器和分流器使有。实际应用主要有:检定电流和电压互感器,检定电阻分流器和分压器,进行阻抗和导纳比较以及检定互感器校验仪整检装置和互感器校验仪的同相盘。文中对检定结果的误差计算作了分析和推导。 相似文献
7.
8.
Larry GALLAGHER 《生命科学仪器》2011,9(4):8-9
科学和制药进展方面越来越多的研究都依赖于对细胞生长和复杂生化反应的了解和控制。在以上过程中实现气体精确和可追踪的监测和控制很有必要。对诸如二氧化碳、氮气、空气等气体的测定与控制已经可以通过一个简单的可变截面流量计成功实现。但可变截面流量计在精确度、可追踪性和最大允许压力等方面仍然具有明显的局限性。本文所介绍的热式质量流量计和控制系统为流量测定和控制提供了更高的准确度和直接的可追溯性,且此准确度和追溯性几乎不受压力和温度变化的影响。 相似文献
9.
火电厂继电保护系统是保障电力系统安全和稳定运行的重要保障措施。然而,由于其复杂性和高度关键性,故障诊断和处理一直是一个重要的研究课题。本文基于对火电厂继电保护系统故障类型和原因分析的研究,阐述了基于数学模型、信号处理和人工智能的故障诊断方法,并探讨了常规处理、应急处理、预防性维护和智能化处理等故障处理技术的研究现状和发展方向,为提高火电厂继电保护系统的运行安全性和稳定性提供了一定的理论和技术支持。 相似文献
10.
由于塑料和橡胶制品特有的优点,市场的需求量以很大的幅度增长。注射机和挤出机是塑料和橡胶制品的专用成型机器,而螺杆则是注射和挤出机的最重要元件,其加工质量和效率影响着塑料和橡 相似文献
11.
12.
Anastatus japonicus Ashmead (Hymenoptera: Eupelmidae) is an important egg parasitoid of several major insect pests. To better understand its host finding mechanisms, the antennal sensilla of female wasp were investigated by scanning electron microscopy. Sensilla chaetica were found mainly on radicle and pedicel segments of the antennae. i-Type sensilla, s. campaniformia, and corneous sensilla were detected on the leeward side, while s. coeloconica and lance sensilla were presented on the windward side of the antennae. S. trichodea and s. basiconica were more abundant on the leeward side than on the windward side of the antennae. More s. placodea were found on the windward side than on the leeward side of the right antenna, while the opposite results were observed on the left antenna. Overall, more s. placodea were found on the right antenna than that on the left antenna. The numbers of s. trichodea and s. basiconica on the clava or the third flagellum antennomere of the right antenna were more than those of the left antenna, whereas their distribution patterns on the other corresponding antennomeres were reverse. Our results showed that there is a strong asymmetrical antennal sensilla distribution quantitatively and spatially between the left and right antennae. Placoid sensilla are present more on the right antenna than on the left antenna. S. campaniformia, corneous sensilla, and i-type sensilla were found only on the leeward side of the antennal clava, while their external morphology and potential functions were described and discussed in detail for the first time. 相似文献
13.
This paper presents an experimental study on the influence of HPF friction modifier on rail corrugation. The tests were carried out on a curve section of a commuter line, where corrugation appeared in the inner rail of the curves. The influence of HPF on wheel-rail contact forces has been studied based on acceleration measurements on the rail. These measurements were carried out with and without corrugation on the rail.Also, in order to compare the corrugation levels developed with and without the HPF, the evolution of corrugation was analyzed for this particular curve. The corrugation amplitudes and wavelengths were studied. It was found that the application of HPF substantially reduces the acceleration levels on the rail in vertical and lateral directions and delays the corrugation growth. 相似文献
14.
沟槽与方柱阵列结构的微铣削和加工表面疏水性 总被引:2,自引:0,他引:2
采用理论分析与试验结合的方法研究沟槽与方柱阵列结构参数对水滴在其表面接触角的影响。基于适用于光滑表面的Young氏方程和适用于粗糙表面的Wenzel模型及Cassie-Baxter模型,建立沟槽结构和方柱阵列结构的Wenzel模型公式以及Cassie-Baxter模型公式,计算出水滴在其表面的接触角理论预报值。采用直径0.1 mm微铣刀加工出相应的沟槽结构和方柱阵列结构表面,测量水滴在加工表面上的接触角,并与理论预报值进行比较分析。研究结果表明,沟槽与方柱阵列结构可以使水滴在其表面的接触角增大,接触角随着微结构间距增加而增大,随着凸台(方柱)宽度增大而减小。沟槽结构与方柱阵列结构对接触角的影响规律不尽相同:沟槽结构表面上水滴在垂直于沟槽方向和平行于沟槽方向的接触角有差异并且相互影响;水滴在沟槽结构表面有着更稳定的接触角变化,而在方柱阵列结构表面有更大的接触角,并且更接近球状。 相似文献
15.
16.
为研究影响数字比例阀先导级高速开关阀响应特性的主要因素,以常闭高速开关阀为研究对象,阐述了该阀结构特征及工作原理,分析了数学机理,运用ANSYS电磁仿真软件建立高速开关阀轴对称二维瞬态电磁模型。通过对高速开关阀电磁特性分析及实验测试,验证了所建模型的正确性。基于该模型在不同线圈匝数、阀芯质量、线圈内阻、复位弹簧刚度、衔铁与挡铁吸合接触面积时,对高速开关阀阀芯运动各阶段进行动态模拟,分析了影响高速开关阀响应特性的主要设计参数。结果表明:线圈匝数对高速开关阀响应速度的影响最大,当线圈匝数增加67%时,高速开关阀开启时间延长27.8%,关闭时间延长11.6%,总响应时间延长21.6%;线圈内阻、阀芯质量与复位弹簧刚度3个因素对高速开关阀响应速度的影响次之,环形接触面积对高速开关阀总响应时间影响较小,磁轭壁厚对高速开关阀运动各阶段响应时间基本没有影响。 相似文献
17.
应用数值方法研究甲板上浪时船舶的横摇运动特性。基于修正的伯努利方程,建立了船舶甲板上浪水量的计算模型。根据甲板上浪水的不同横截面形状,推导了甲板上浪水重心及上浪水高度的计算公式。考虑甲板上浪水引起的横倾力矩,建立了规则波浪中船舶的横摇运动方程。以一条艉滑道拖网渔船为例,计算了在不同初始甲板积水量、波浪频率和波浪激励幅值时船舶的横摇响应,分析了甲板上浪对船舶横摇运动的影响。研究结果表明,在初始积水量大于零、波浪激励频率较低时,甲板上浪使船舶的横摇幅值大幅增加。 相似文献
18.
19.