共查询到20条相似文献,搜索用时 93 毫秒
1.
固相微萃取GC/MS分析人体手部气味 总被引:9,自引:0,他引:9
采用固相微萃取顶空进样技术和气相色谱、质谱方法对人体的手部气味进行了分析,探讨了手部气味样品的采样方法和分析条件。利用70μm乙烯二醇-二乙烯基苯共聚物(CW/DVB)萃取膜对人体手部气味样品进行了多次取样分析,获得了98~105个色谱峰,检出了34个化合物。发现人体手部气味是由脂肪酸、醋、醇、胺、酮等物质组成,多次分析同一个体气味样品的色谱图有较好的相似性。从总的取样及分析结果看,利用气相色谱、质谱固相微萃取顶空进样技术在人体气味的分析研究中有着较好的应用前景。 相似文献
2.
3.
顶空固相微萃取-气相色谱-质谱法分析白鲢鱼中的挥发性成分 总被引:8,自引:0,他引:8
以我国重要食用的淡水鱼之一,白鲢鱼为原料,采用涂有聚二甲基硅氧烷-二乙烯苯(PDMS-DVB)涂层的固相微萃取头萃取挥发性成分,以鱼肉气味成分中含量比较多的物质(己醛、己醇、庚醛、庚醇、辛醛、1-辛烯-3-醇、壬醛等)为参照对象,比较了不同涂层的萃取头、萃取时间、萃取温度、离子强度、初始状态下不分流时间的长短、解吸时间、程序升温速率等因素对固相微萃取的萃取效率以及气相色谱-质谱联用仪分析效率的影响,建立了顶空固相微萃取技术与气相色谱-质谱联用仪分析鉴定鱼肉中的气味成分的方法。结果表明:固相微萃取技术有效地吸附了鱼肉中的挥发性成分,经NIST质谱数据库检索和文献对照,共确定27种成分,并且萃取时不会造成环境污染,分析简单、快速、经济。 相似文献
4.
采用聚二甲基硅烷(PDMS)为固相涂层的固相微萃取(SPME)装置,建立了顶空固相微萃取-气相色谱法(HS-SPME-GC)测定油田水中挥发性有机物的方法,并对萃取条件和色谱条件进行了优化.方法的检出限为0.02~0.65μg/L,相对标准偏差为1.5~5.1%;与顶空气相色谱法相比,灵敏度提高20~300倍;加标回收率为85.2~110.0%.与顶空气相色谱法进行了比较,相对误差不大于6.50%.该法简便、快捷、灵敏,精密度好. 相似文献
5.
6.
7.
固相微萃取-气相色谱-质谱法分析烟用浸膏挥发性成分 总被引:3,自引:0,他引:3
采用固相微萃取 -气相色谱 -质谱 ( SPME-GC/MS)法定性分析了烟用浸膏 -茉莉花浸膏的挥发性和半挥发性成分。探讨了不同萃取头、不同温度平衡样品及采样时间对分析检测结果的影响。结果表明 :5 0 /3 0μm DVB/Carboxen/PDMS纤维头于 65℃温度下采样 1 .0 h,可获得较满意的结果 ;共鉴定出 61种成分 ,占挥发和半挥发性成分总量的 89.79%。其中酯类化合物 ( 2 2种 )为主要成分 ,是香料的原料来源 ,占总的相对含量的 48.0 8% ;烯类 ( 1 9种 )为 1 7.95 % ;醇类 ( 1 3种 )为 2 3 .0 9%。乙酸苯甲酯 ( 1 4.5 2 % )、顺 -苯甲酸 -3 -己烯-1 -酯 ( 1 4.1 1 % )、芳樟醇 ( 1 3 .1 6% )和α-金合欢烯 ( 1 2 .66% )是相对含量最多的成分。此方法适用于对样品简便、快速地定性分析 相似文献
8.
采用固相萃取技术测定中国察尔汗盐湖盐水中的有机组分。多孔聚合物吸附剂LC-C18(非极性)和XAD树脂用于萃取盐湖卤水中的有机化合物。通过气相色谱-质谱(GC-MS)鉴定了包括烃、酯、醇、酮以及某些低相对分子质量的含杂原子的有机化合物等多种物质。LC-C18柱和XAD柱萃取萘-D10的平均回收率分别为93%和79%。 相似文献
9.
《分析仪器》2015,(6)
建立了搅拌棒吸附萃取(SBSE)-热脱附-气相色谱/质谱联用法测定瓶装饮用水中54种挥发性有机物的方法。将涂有聚二甲基硅氧烷(PDMS)的搅拌棒置于20mL水样中以1500r/min萃取20min后热脱附-气相色谱质谱仪检测,分别对影响SBSE萃取效率的条件进行了优化。方法检出限为0.03μg/L~6μg/L,54种VOCs的线性相关系数为0.9943~0.9999,RSD范围在1.09%~5.02%(n=10),平均加标回收率在81.6%~99.6%(n=10)。方法简便快速,准确度和灵敏度高,检出限低,稳定性好,干扰小,线性范围宽,无有机溶剂污染,可满足瓶装饮用水中54种痕量VOCs的分析测定。 相似文献
10.
卷烟包装材料中挥发性成分的检测 总被引:5,自引:0,他引:5
采用固相微萃取(SPME)技术提取不同卷烟包装材料中的挥发性组分,用GC/MS进行了分析鉴定。探讨了最佳取样条件,包括纤维头的极性、取样量、平衡时间和平衡温度;测试了不同类型纤维头的取样效果。给出了三种有代表性的卷烟包装材料的分析结果,并就分析结果作了讨论。 相似文献
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献
14.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
15.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
16.
17.
18.
Modern methods of implementation of the rule of positive gradient of mechanical properties are considered; this rule was formulated by I.V. Kragelskii and its application serves to minimize the friction and wear of solids. The given methods include the application of coatings with the method of finishing antifricton abrasion-free treatment; application of new metal-cladding lubricating materials; and creation of a nanostructural state of the surface iron nitride layer by nitriding steel with a positive gradient of hardness normal to the surface. 相似文献
19.
铣削图形自动编程系统的研究 总被引:2,自引:0,他引:2
介绍了一种铣削图形自动编程系统。该系统以Win2000为平台,以VC6.0为开发工具,以DXF形式读取用Auto-CAD绘制的零件图或工艺图,经过工艺分析和处理,自动生成NC代码,并进行仿真加工。 相似文献
20.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献