Toward Energy-Efficient and Trustworthy eHealth Monitoring System

The rapid technological convergence between Internet of Things(IoT),Wireless Body Area Networks(WBANs)and cloud computing has made e-healthcare emerge as a promising application domain,which has significant potential to improve the quality of medical care.In particular,patient-centric health monitoring plays a vital role in e-healthcare service,involving a set of important operations ranging from medical data collection and aggregation,data transmission and segregation,to data analytics.This survey paper firstly presents an architectural framework to describe the entire monitoring life cycle and highlight the essential service components.More detailed discussions are then devoted to {\em data collection} at patient side,which we argue that it serves as fundamental basis in achieving robust,efficient,and secure health monitoring.Subsequently,a profound discussion of the security threats targeting eHealth monitoring systems is presented,and the major limitations of the existing solutions are analyzed and extensively discussed.Finally,a set of design challenges is identified in order to achieve high quality and secure patient-centric monitoring schemes,along with some potential solutions.     

玉炼汽油在线调合可行性分析

以汽油调合为例,分析在玉炼实现油品在线调合的可行性。     

“至上”与“虚无”

<正>俄国画家马列维奇是"至上主义"抽象绘画流派的创始者,其绘画作品简约而纯粹,以最简单的形式——方块展现出艺术家丰富的感情世界,探索了形体、色彩与空间的关系。而同样善于运用几何形态的西班牙雕塑家奥泰萨的风格则显得冷静而克制,其雕塑作品通常看起来虚幻而抽象,没有强烈的情感表现,以高度理性化的手法展现出一种"虚无"的艺术境界。二人所专注的领域虽有不同,但他们的作品都在关注形式与其所在空间之间的复杂关系。     

基于CT扫描技术的多孔沥青混凝土抗冻融破坏性能研究

冻融破坏是沥青路面常见的病害形式,目前主要通过马歇尔试件的劈裂强度在冻融环境下的变化情况来间接反映沥青混凝土的抗冻融破坏能力,未揭示出冻融破坏下沥青路面内部结构上的变化,如裂纹、空隙率的变化规律。因此,本研究中采用一种直观的方法来研究沥青混凝土的抗冻融破坏能力,主要是采用工业CT跟踪多孔沥青混凝土内部空隙率在冻融环境下的变化。结果显示沥青混凝土的抗冻融破坏性能与空隙率的分布有很大关系,总体上,在冻融破坏过程中,沥青混凝土试件内部空隙率明显增大的局部区域会造成混凝土局部或整体空隙率的显著变化,严重影响多孔沥青混凝土的抗冻融破坏性能。     

基于高频损耗比的干式空心电抗器制造缺陷检测方法及应用探讨

本文通过分析电抗器因制造工艺导致少匝和极限工艺偏差时600Hz损耗,提出高频损耗可作为电抗器制造缺陷的检测手段及其适用范围,并以600Hz的实测损耗与理论损耗之比是否超过1.5作为判据,以同组任两台损耗之比是否超过1.5作为辅助判据,同时列举应用实例.     

飞片材料经加速老化后对飞片速度的影响研究

为了掌握经长期贮存后的飞片材料在初始起爆条件下的飞片速度是否会发生显著性退化,采用光子多普勒测速仪对经71℃加速老化不同时间后的聚酰亚胺飞片材料形成飞片的速度迚行了测试。结果表明,针对不同时间加速老化后的聚酰亚胺飞片材料,在相同起爆条件下由其形成飞片的最大速度及飞片出炮筒时的速度均无显著性变化,且在一定炮筒厚度下,飞片出炮筒的速度没有达到最大值。     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

无掩模激光干涉光刻技术研究

介绍了一种不用掩模的光刻技术———激光干涉光刻技术的基本原理,给出了干涉光刻技术的主要特点及一些可能的应用,并对实验系统和初步实验结果进行了分析。研究表明,激光干涉光刻具有大视场和分辨率高和视场宽等优点。