Photocatalytic degradation and heat reflectance recovery of waterborne acrylic polymer/ZnO nanocomposite coating

This work aims to clarify the photocatalytic degradation mechanism and heat reflectance recovery performance of waterborne acrylic polymer/ZnO nanocomposite coating. To fabricate the nanocomposite coating, ZnO nanoparticles (nano-ZnO) were dispersed into acrylic polymer matrix at the various concentrations from 1 to 6% (by total weight of resin solids). The photocatalytic degradation of nanocomposite coating under ultraviolet (UV) light irradiation has been investigated by monitoring its weight loss and chemical/microstructural/morphological changes. As the topcoat layer, its heat reflectance recovery has been evaluated under UV/condensation exposure by using an artificial dirty mixture of 85 wt% nanoclay, 10 wt% silica particles (1–5 μm), 1 wt% carbon black, and 2 wt% engine oil. After 108-cycle UV/condensation exposure, infrared spectra and weight loss analysis indicated that the maximal degradation for nanocomposite coating is observed at 1 wt% nano-ZnO. On the other hand, after 96 hr of UV light exposure, the nanocomposite coating with1 wt% nano-ZnO could restore effectively the reflective index of solar-heat reflectance coating (from 58.45 to 80.78%). Finally, the photodegradation mechanism of this waterborne acrylic polymer coating has been proposed as the UV-induced formation of CC CO conjugated double bonds. As a result, its self-cleaning phenomenon can be achieved as the recovery of heat reflectance.     

High-efficiency Silicon Solar Cells: A Review

Over the past few decades, crystalline silicon solar cells have been extensively studied due to their high efficiency, high reliability, and low cost. In addition, these types of cells lead the industry and account for more than half of the market. For the foreseeable future, Si will still be a critical material for photovoltaic devices in the solar cell industry. In this paper, we discuss key issues, cell concepts, and the status of recent high-efficiency crystalline silicon solar cells.     

红外探测技术的军事应用

主要针对目前雷达在现代战争中存在的致命弱点，提出了一种优势互补方案－将雷达作用距离远与红外探测系统被动接收、工作隐蔽等优点相结合，并详细论述雷达／红外区域防御系统中通信网工作原理及各站工作模式。     

Purification and characterization of a human bradykinin binding protein from inflammatory cells

Bradykinin (BK) is a potent mediator with a broad spectrum of pharmacological and inflammatory actions which are exerted through cell surface receptors. We report here the affinity chromatographic purification of a novel 14 kDa BK binding protein from human blood neutrophils and also peripheral blood mononuclear cells (PBMC), 80% of which are lymphocytes. Radioreceptor crosslinking experiments using bifunctional crosslinkers and radiolabelled BK identified a 14 kDa protein in these cell types both on the cell surface, in glycerol purified plasma membranes and in detergent solubilized cell extracts. Purification by BK affinity chromatography from a variety of BK responsive human cell types i.e. CCD-16Lu lung fibroblasts, HL60 promyelocytes, U937 myelomonocytes and Jurkat T lymphocytes also demonstrated a 14 kDa protein. Purified material obtained from three different BK affinity columns all demonstrated three major proteins at 190, 50 and 14 kDa when eluted with either excess BK or mild acid. Neutrophil fractions from detergent solubilized cell extracts contained an additional 150 kDa protein when eluted with mild acid. Neutrophil and PBMC crude plasma membrane BK affinity column purifications yielded only a single 14 kDa protein. Radioreceptor dot assays of the purified neutrophil eluates containing the 14 kDa protein revealed specific binding to [125I]-BK with a 160 fold excess signal ratio over the original membrane extract. Our data indicates that we have successfully isolated a 14 kDa novel human BK specific binding protein expressed on the surface of inflammatory cells.     

高频超声波在氧化皮中传播性能标定

对高频超声小在12Cr2MoWVTiB(G102钢）和12Cr1MoV钢钢管运行所产生氧化皮中的传播速度进行了定量标定，并对标定误差进行了统计计算，结果表明，12Cr1MoV钢氧化皮测厚标定点最大偶然误差值为0．050mm,G102钢为0．030mm，并指明了误差来源。     

海洋石油平台水下夹桩器本体结构分析

水下夹桩器是一种广泛应用于海洋石油平台建设的液压夹具。水下夹桩器本体焊接在导管架上，支撑夹桩器液压缸。在水下夹桩器本体设计中，采用有限元法完成了对本体强度和刚度的结构分析；建立了有限元分析模型，用ANSYS软件进行结构分析，得到了分析结果，并将该结果与理论计算结果进行了比较，验证了有限元分析技术的有效性。设计结果满足工程要求，为改进和优化结构提供了理论依据，节省了分析计算时间。     

工程结构优化设计发展综述

 着重评述了工程结构优化设计研究领域从最初的尺寸优化发展到形状优化、拓扑优化的基本历程及其相关特点，并对优化设计选用的优化算法进行了归类，提出了这一领域今后仍然有待于发展的主要方面．     

一种适用于高数据速率和高速移动环境的新型信道估计方法——双正交通道信道估计方法

本文给出了一种适用于高数据速率和高速移动环境下的新型有效的信道估计方法-双正交通道信道估计方法(CETOC,Channel Estimation by using Two Orthogonal Channels),这种信道估计方法通过采用两个独立通道的联合估计,可以有效的克服快衰落的影响,从而使得在快衰落信道下应用多维状态调制成为可能.     

江口拱坝坝基渗流场有限元法分析

运用固定网格结点虚流量法及排水子结构技术，对江口拱坝坝基的防渗与排水渗控制施、两岸山体边界条件、隔水岩层阻渗及岩体成层产状等因素在影响坝基渗流场特性中的具体作用进行了计算分析。结果表明，排水子结构技术在精细求解复杂坝基渗流场中具有明显的优势，它在理论和算法上严密，完全能仿真模拟各个排水孔的几何尺寸及排水降压的真实水力行为，不仅能明显地提高计算效率，还能使渗流场的精度大大提高。