Authenticity green coffee bean species and geographical origin using near-infrared spectroscopy combined with chemometrics

To prevent the adulteration of agricultural resources and provide a solution to enhance the green coffee bean supply chain, authentication using the near-infrared spectroscopy (NIRS) technique was investigated. Partial least square with discrimination analysis (PLS-DA) models combined with various preprocessing methods were built from NIR spectra of 153 Vietnamese green coffee samples. The model combined with the standard normal variate and the first order of derivative yielded excellent performance in predicting coffee species with the error cross-validation of 0.0261. PLS-DA model of mean centre and first-order derivative spectra also yielded good performance in verifying geographical indication of green coffee with the error of 0.0656. By contrast, the predicting abilities of post-harvest methods were poor. The overall results showed a high potential of the NIRS in online authentication practices.     

Morphology-dependent spin Seebeck effect in yttrium iron garnet thin films prepared by metal-organic decomposition

In this study, we examined the dependence of surface morphology and spin Seebeck effect (SSE) voltages on the poly[vinylpyrrolidone] (PVP) concentration in polycrystalline Y₃Fe₅O₁₂ (YIG) ultrathin films on a silicon substrate synthesized by metal-organic decomposition followed by a crystallization process. During fabrication, PVP concentrations of 0.5–2 g were used while all other conditions remained fixed. Atomic force microscopy and grazing incidence X-ray diffraction (XRD) measurements revealed a strong dependence of crystallinity and sample morphology on PVP concentration. The 1-g PVP sample had the smoothest surface, with a root mean square roughness of 0.2 nm, as well as superior bulk uniformity with respect to the shape and intensity of XRD reflection peaks. This was confirmed by scanning electron microscopy measurements of a cross-section of the sample that revealed a uniform film without pores. SSE measurements were performed to obtain the output SSE voltages (V_SSE) of all samples, to which a platinum layer was added as a spin-detection layer. Repeatedly, the 1-g PVP sample had the best performance, demonstrating the importance of film crystallinity and morphology in the spin-to-charge conversion efficiency of YIG films.     

Antioxidant Activity of Rambutan (Nephelium lappaceum L.) Peel Extract in Soybean Oil during Storage and Deep Frying

Rambutan (Nephelium lappaceum L.) peel (RBP) is discarded as the main by‐product during processing of the fruit. Increasing attention is now paid to the valorization of RBP for the recovery of valuable compounds. Geraniin, ellagic acid, quercetin, and rutin are the main phenolic compounds found in methanolic RBP extract. Extracted rambutan peel powder (ERPP) is used to evaluate the oxidative stability of soybean oil stored at 4 and 30 °C in the dark and light and deep fried with potatoes at 160 °C. Tert‐butylhydroquinone (100 µg g^?1 oil, TBHQ) serves as positive control. Oil supplemented with ERPP of 1000 µg gallic acid equivalents (GAE) g^?1 of oil shows positive effects on the retardation of the oxidation process during storage in comparison with oil without addition. During deep frying, either ERPP (1000 µg GAE g^?1) or TBHQ retards the lipid oxidation of oil. Levels of thiobarbituric acid reactive substances of potatoes fried in oil fortified with the extract and TBHQ (0.4–0.59 µg g^?1) are much lower than those without the extract (1.31 ± 0.10 µg g^?1) (p < 0.05). Therefore, RBP extract exhibits favorable antioxidant effects and can be used for effectively inhibiting lipid oxidation in oil during storage and deep frying. Practical Applications: An extract from rambutan fruit peel containing phenolic compounds, that is, geraniin, ellagic acid, rutin, and quercetin showed promising results to be used as potential antioxidants in soybean oil during deep frying. Both oxidation of the frying oil as well as the oxidation of the food product, that is, potatoes were inhibited. These results demonstrated that rambutan fruit peel extract can be used as a natural antioxidant in frying oil to replace synthetic antioxidants, that is, TBHQ.     

Synthesis and Application of Novel Nano Fe-BTC/GO Composites as Highly Efficient Photocatalysts in the Dye Degradation

Topics in Catalysis - Nano Fe-BTC/graphene oxide (GO) composites were successfully synthesized by hydrothermal treatment with a microwave-assisted method. Samples were characterized by X-ray...     

Photocatalytic degradation and heat reflectance recovery of waterborne acrylic polymer/ZnO nanocomposite coating

This work aims to clarify the photocatalytic degradation mechanism and heat reflectance recovery performance of waterborne acrylic polymer/ZnO nanocomposite coating. To fabricate the nanocomposite coating, ZnO nanoparticles (nano-ZnO) were dispersed into acrylic polymer matrix at the various concentrations from 1 to 6% (by total weight of resin solids). The photocatalytic degradation of nanocomposite coating under ultraviolet (UV) light irradiation has been investigated by monitoring its weight loss and chemical/microstructural/morphological changes. As the topcoat layer, its heat reflectance recovery has been evaluated under UV/condensation exposure by using an artificial dirty mixture of 85 wt% nanoclay, 10 wt% silica particles (1–5 μm), 1 wt% carbon black, and 2 wt% engine oil. After 108-cycle UV/condensation exposure, infrared spectra and weight loss analysis indicated that the maximal degradation for nanocomposite coating is observed at 1 wt% nano-ZnO. On the other hand, after 96 hr of UV light exposure, the nanocomposite coating with1 wt% nano-ZnO could restore effectively the reflective index of solar-heat reflectance coating (from 58.45 to 80.78%). Finally, the photodegradation mechanism of this waterborne acrylic polymer coating has been proposed as the UV-induced formation of CC CO conjugated double bonds. As a result, its self-cleaning phenomenon can be achieved as the recovery of heat reflectance.     

Effect of Supports and Promoters on the Performance of Ni-Based Catalysts in Ethanol Steam Reforming

Ethanol steam reforming (ESR) is one of the potential processes to convert ethanol into valuable products. Hydrogen produced from ESR is considered as green energy for the future and can be an excellent alternative to fossil fuels with the aim of mitigating the greenhouse gas effect. The ESR process has been well studied, using transition metals as catalysts coupled with both acidic and basic oxides as supports. Among various reported transition metals, Ni is an inexpensive material with activity comparable to that of noble metals, showing promising ethanol conversion and hydrogen yields. Additionally, different promoters and supports were utilized to enhance the hydrogen yield and the catalyst stability. This review summarizes and discusses the influences of the supports and promoters of Ni-based catalysts on the ESR process.     

Geosynthetic reinforced piled embankment modeling using discrete and continuum approaches

Understanding the load transfer mechanism can support engineers having more economical design of geosynthetic reinforced piled embankments. This study aims to investigate the load transfer mechanisms by two different numerical methods including the Discrete Element Method (DEM) and the Finite Difference Method (FDM). The DEM model adopts (a) discrete particles to simulate the micro-structure of the granular materials and (b) coupled discrete element – finite element method (DEM-FEM) to capture the interaction between granular materials and geotextiles. On the other hand, the FDM model uses an advanced constitutive soil model considering the hardening and softening behaviour of the granular materials. The numerical results show that the geotextiles can only contribute to the vertical loading resistance in cases where the soils between piles are soft enough. In terms of design, an optimum value of the geotextile tensile stiffness can be found considering the load, the soft soil stiffness and the thickness of the embankment. Both the DEM and the FDM show that a high geotextile tensile stiffness is not required since an extra stiffness will slightly contribute to the efficiency of the geosynthetic reinforced piled embankments. Nevertheless, both models are useful to optimize the design of geosynthetic reinforced piled embankments.     

Do Agile Managed Information Systems Projects Fail Due to a Lack of Emotional Intelligence?

Information Systems Frontiers - Agile development methodologies (ADM) have become a widely implemented project management approach in Information Systems (IS). Yet, along with its growing...     

Cache-aided full-duplex: delivery time analysis and optimization

Edge caching has received much attention as a promising technique to overcome the stringent latency and data-hungry challenges in the future generation wireless networks. Meanwhile, full-duplex (FD) transmission can potentially double the spectral efficiency by allowing a node to receive and transmit at the same frequency band simultaneously. In this paper, we investigate the delivery time performance of a cache-aided FD system, in which an edge node, operates in FD mode, serves users via wireless channels and is equipped with a cache memory. Firstly, we derive a closed-form expression for the average delivery time by taking into account the uncertainties of both backhaul and access wireless channels. The derived analysis allows the examination of the impact of key parameters, e.g., cache size and transmit power. Secondly, a power optimization problem is formulated to minimize the average delivery time. To deal with the non-convexity of the formulated problem, we propose an iterative optimization algorithm based on the bisection method. Finally, numerical results are presented to demonstrate the effectiveness of the proposed algorithm. A significant delivery time reduction is achieved by the proposed optimization compared to the FD reference and half-duplex counterpart.