微波合成无机纳米材料的研究进展

微波加热作为一种合成纳米材料的新方法，近年来得到飞速发展。介绍了微波加热原理，阐述了微波合成无机纳米材料的一些研究进展，主要是液相微波加热在制备金属氧化物和金属硫化物纳米材料以及微波烧结在合成陶瓷材料的应用，并对该领域未来作了一些展望。     

HA型粘结剂性能评判的研究

冷固结球团直接还原工艺成功的关键因素之一是成型粘结剂的选用。粘结剂性能评判 ,传统的方法是通过考查球团矿的机械强度来说明粘结剂性能的优劣 ,步骤繁锁。经过试验研究 ,本文提出了用粘度大小来评判粘结剂性能的直接方法并从理论上进行了论证。对于 HA型复合粘结剂 ,在六速旋转粘度计上测量 ,50 g复合粘结剂的粘度若大于或等于 6.5× 1 0 -3 Pa·s,表示粘结剂性能较好 ,能满足铁精矿冷固球团直接还原工艺的要求 ;若小于或等于 3.0× 1 0 -3 Pa· s,则表示该粘结剂性能较差。     

Collector matching in origin potential flotation

Through thermodynamic calculation and electrochemistry analysis~ taking the galena as example,the ba-sis for collector matching in origin potential flotation (OPF) was studied. The results of thermodynamic calculation show that the upper limit value of pH and flotation potential of diethyldithiocarbamate (DDTC) is higher than that of xanthogenate (KBX), which indicates that the collecting ability of DDTC for galena is better than that of KBX.The results of the interface capacitance analysis show that lead diethyldithiocarbamate (PbD2) is more steady than lead xanthogenate (Pb(BX)2) on the galena surface under the oxidation condition; the resistance analysis shows thatD2 (DDTC oxidizes into its dimmer) and dixanthogen (BX)2 will occur non-faradic desorption on the pyrite electrodesurface when the potentials are above 0.13 V and 0.2 V respectively. A synthetical criterion ΔE of collecting ability and selectivity was proposed. The results predicted by this criterion are confirmed through flotation experiments of ore.     

Desilication from illite by thermochemical activation

Illite occurs widely in bauxite ores and results in low alumina grade of the ores. Differential thermal analysis (DTA), thermal gravimetric analysis (TGA) and X-ray diffraction analysis (XRD) show the OH groups split off from the structural framework of illite between 500 ℃ and 700 ℃. With the increase in temperature up to about 1 100 ℃, the layer structure of illite breaks up and Si in the layers is transformed into the amorphous state. Meanwhile, mullite comes out at 1 100 ℃. Quartz occurring in illite keeps unchanged in structure in the range of 500 -1 200 ℃. A desilication process from illite by thermochemical activation followed by alkali leaching is therefore developed on the basis of the behavior that amorphous silica is alkali soluble. The investigation finds that the optimum parameters for desilication are activation temperature of 1 100 - 1 150 ℃, activation time of 90 - 120 min, leaching temperature of 95 - 110 ℃, leaching time of 90 - 120 min and concentration of caustic soda (Na2Ok) 120 - 150 g/L. An overall desilication about 45% is attained under these conditions. XRD analysis confirms that the active amorphous SiO2 has been dissolved in the alkali solution and removed from the samples, while quartz and mullite have not. The investigation also shows that the formation of mullite during activation and formation of sodium hydroalu minosilicates (Na96 Al96 Si96 O384 and 0.95Na2 O · Al2 O3 · 3.25SiO2 · 4.79 H2 O) during leaching lead to the relatively low desilication of illite.     

高纯超细活性γ-Al2O3的应用及其研究进展

从γ-Al2O3的结构和特性出发介绍了高纯超细活性γ-Al2O3在高性能特种陶瓷合成、催化剂或其载体及化学机械抛光等方面的应用，综述了国内外有关高纯超细Al2O3多种制备方法的研究现状和发展趋势。     

Purification and characterization of extracellular chitinase from a novel strain Aspergillus fumigatus CS-01

Twelve samples derived from different locations in south central area of China are treated by enrichment and spread-plate technique for initial screening. Seven chitinase-producing strains are isolated. The chitinase present in the culture supernatant of strain CS-01 possesses the maximum activity of 0.118 U/mL. Analysis of the morphological feature and the ITS rDNA sequence reveals that strain CS-01 belongs to Aspergillus fumigatus. Production of the chitinase is regulated by a inducible way and the maximum activity appears at 36 h in colloidal chitin culture. Purification of the chitinase is carried out by salting out, gel filtrate chromatography and anion exchange chromatography sequentially. Native-PAGE and SDS-PAGE indicate that the chitinase from A. fumigatus CS-01 is a monomer with the relative molecular mass estimated to be 4.50×10⁴. Its maximum activity appears at pH 5 and 55 °C. The chitinase is stable at pH 4.0–7.5 and below 45 °C. Foundation item: Projects(50621063, 50674101) supported by the National Natural Science Foundation of China     

Aerobic biodegradation of di-n-butyl phthalate by Xiangjiang River sediment and microflora analysis

Di-n-butyl phthalate (DBP), one of phthalate acid esters (PAEs), was investigated to determine its biodegradation rate using Xiangjiang River sediment and find potential DBP degraders in the enrichment culture of the sediment. The sediment sample was incubated with an initial concentration of DBP of 100 mg/L for 5 d. The biodegradation rate of DBP was detected using HPLC and the degraded products were analyzed by GC/MS. Subsequently, the microbial diversity of the enrichment culture was analyzed by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). The results reveal that almost 100% of DBP is degraded after merely 3 d, generating two main degraded products: mono-butyl phthalate (MBP) and 9-octadecenoic acid. After a six-month enrichment period under the pressure of DBP, the dominant family in the final enrichment culture is clustered with the Comamonas sp., the remaining are affiliated with Sphingomonas sp., Hydrogenophaga sp., Rhizobium sp., and Acidovorax sp. The results show the potential of these bacteria to be used in the bioremediation of DBP in the environment.     

Bioleaching of chalcocite by mixed microorganisms subjected to mutation

Mixed microorganisms with elevated activity of chalcocite-leaching were screened by mutation methods. The original microorganisms collected from acid mine drainage of different sites were mixed and then treated with mutagens NO₂⁻, diethyl sulfate (DES), UV and their combinations, respectively. Five groups of mixed microorganisms with much stronger ore-leaching ability were obtained by screening on the leaching media. Among them, group E of mixed microorganisms (treated with 1% DES for 60 min) with the best performance on chalcocite-leaching, increases the content of Cu²⁺ by 101.4% in 20 d of leaching compared with the control culture. In addition, group E is more tolerant to Cu²⁺ in media than the control without mutation treatment. Analysis for the diversity of microbial clones indicates that half of operational taxonomic units (OTUs) in group E are Acidithiobacillus ferrooxidans. These observations suggest that group E might have potentials for industrial application. Foundation item: Project(50321402) supported by the National Natural Science Foundation of China; Project(2004CB619201) supported by the Major State Basic Research and Development Program of China     

Identification and fermentation optimization of protopectinase-overproducing strain Aspergillus niger CD-01 for pectin production

In order to solve the citrus peel resource waste problem and minimize the drawbacks of chemical extraction of pectin, a protopectinase-overproducing strain CD-01 for pectin production was isolated from a pit soil dumped with perished orange in Changde City, Hunan Province of China. The strain CD-01 had the same morphology and 28S rRNA gene sequence (FJ184995) as that of Aspergillus niger (ATCC 64028). It was thus identified and named as Aspergillus niger CD-01. The fermentation condition was optimized based on L₉(3⁴) orthogonal experimental design and the variances analyses. The results show that the optimal condition for producing pectin is as follows: time 36 h, temperature 35 °C, pH 5, and urea as the nitrogen source. Under this condition, the pectin yield can reach up to 24.5%. This shows a great potential of Aspergillus niger CD-01 in pectin extraction from citrus. Foundation item: Projects(50621063, 50674101) supported by the National Natural Science Foundation of China     

Bioleaching of pyrrhotite by Sulfobacillus thermosulfidooxidans

The bioleaching of pyrrhotite was investigated using Sulfobacillus thermosulfidooxidans.The effects of pH,pulp concentration,inoculation amount,external addition of ferrous and ferric ions were examined.The pH is found to exert a profound effect on the leaching process for controlling the bacterial activity and precipitation of ferric ions mainly as jarosite.The results show that low pulp content increases the leaching rate of iron.The inoculation amount from 1×107 cell/mL to 1×108 cell/mL has positive effects on the leaching rate.The results also imply that addition of ferrous sulfate（1 g/L） is required for the bacteria to efficiently drive the extraction of iron,however,the leaching efficiency has no obvious enhancement when 2 g/L ferrous sulfate was added.Comparatively,addition of ferric sulfate（2 g/L） significantly inhibits the bioleaching process.At the end of bioleaching,jarosite and sulfur are observed on the surface of pyrrhotite residues by using XRD and SEM.With the passivation film formed by jarosite and sulfur,the continuous iron extraction is effectively blocked.