Squeeze-film effects in MEMS devices with perforated plates for small amplitude vibration

Squeeze-film effects of perforated plates for small amplitude vibration are analyzed through modified Reynolds equation (MRE). The analytical analysis reckons in most important influential factors: compressibility of the air, border effects, and the resistance caused by vertical air flow passing through perforated holes. It is found that consideration of air compressibility is necessary for high operating frequency and small ratio of the plate width to the attenuation length. The analytical results presented in this paper agree with ANSYS simulation results better than that under the air incompressibility assumption. The analytical analysis can be used to estimate the squeeze-film effects causing damping and stiffness added to the system. Since the value of Reynolds number involved in this paper is low (< 1), inertial effects are neglected.     

Effect of Magnetic Interaction on Thermally Activated Reversal in a Magnet With a Distribution of Energy Barriers

The time dependence of magnetization is usually expressed as M(t)=M₀-SInt [see Proc. Phys. Soc. 62, 562 (1949)] for magnetic viscosity experiments. Considering magnetic interaction during the thermal activation process, a form as M(t)=M₀-SIn(t+t₀) is deduced. The dipolar interaction and exchange coupling in a magnet can lead to positive and nonpositive t₀, respectively. In the experiments of the magnetic viscosity for nanocrystalline Pr₂Fe₁₄B ribbons, the existence of positive t₀ is confirmed.     

机动车检测系统中总线设备网络化改造的实现

实现了一种机动车检测系统中总线设备网络化改造的可行方案。利用SST89E564RD单片机与网卡芯片设计的主要接口模块,既为检测设备网络化提供了网关服务,也实现了在线仿真和下载的功能。     

一类约束条件下的跟踪保性能控制

本文研究了一类时变非线性系统在输入有位置约束条件下的跟踪保性能控制问题.首先对非线性对象选择合适的特征运行状况,采用瞬时线性化技术得到多个线性化控制模型,将之看作是一个线性不确定系统,提出应用基于线性矩阵不等式的跟踪保性能控制设计控制器,然后经过推导得到了满足控制约束的充分条件,以定理的形式给出了约束条件下跟踪保性能控制器存在的充分条件.最后给出了仿真算例,仿真结果表明了所提方法的有效性和可行性.     

Micromachining of passive planar micromixer on poly (methyl methacrylate) substrate with excimer laser ablation

Excimer laser ablation technique was introduced into this work to fabricate a passive planar micromixer on the PMMA substrate. T-junction shaped and width-changed S-shaped microchannels were both designed in this micromixer to enhance mixing effect. The mixing experiment of distilled water and Rhodamine B with injection flow rate of 500 and 1,500 μm/s validates the mixing effectivity of this micromixer, and indicates the feasibility of excimer laser ablation in the microfabrication of μ-TAS device.     

Optimal design and motion control of biomimetic robotic fish

This paper is concerned with the design, optimization, and motion control of a radiocontrolled, multi-link, free-swimming biomimetic robotic fish based on an optimized kinematic and dynamic model of fish swimming. The performance of the robotic fish is determined by both the fish＇s morphological characteristics and kinematic parameters. By applying ichthyologic theories of propulsion, a design framework that takes into consideration both mechatronic constraints in physical realization and feasibility of control methods is presented, under which a multiple linked robotic fish that integrates both the carangiform and anguilliform swimming modes can be easily developed. Taking account of both theoretic hydrodynamic issues and practical problems in engineering realization, the optimal link-lengthratios are numerically calculated by an improved constrained cyclic variable method, which are successfully applied to a series of real robotic fishes. The rhythmic movements of swimming are driven by a central pattern generator （CPG） based on nonlinear oscillations, and up-and-down motion by regulating the rotating angle of pectoral fins. The experimental results verify that the presented scheme and method are effective in design and implementation.     

基体界面屈服强度和残余应力失配对界面裂纹扩展的影响

对基体界面屈服强度和残余应力失配情况下的界面裂纹扩展机制进行了力学理论分析,并通过位错与裂纹的关系理论计算了界面裂纹尖端塑性区尺寸。结果表明:当界面裂纹由低强度区向高强度区扩展时,高强度区的残余压应力和屈服强度减少了裂纹尖端的塑性区长度和裂纹尖端张开位移,从而起到了抑制界面裂纹扩展的作用。     

Characterization of plastic flow in two Zr-based bulk metallic glasses

1 Introduction Bulk metallic glasses (BMGs) have attracted a great attention due to their excellent properties, such as high strength, good wear resistance, excellent elasticity and easily forming in viscous state. However, structural applications are currently limited by the lack of macroscopic plasticity at room temperature, characterized by strain-softening which results in the formation of intense localized shear bands. Fracture typically occurs after very small plastic strain in compress…     

Y型微管道中磁性纳米液体对混合率的影响

利用流动显示手段观测了Y型微管道内含纳米磁性颗粒的液体与去离子水的混合.研究了在Re=0.5～4,磁性颗粒体积分数0.38%-1.54%时,外加静磁场(场强40 Gs)对液体混合地影响.证实了磁场作用可以使完全混合长度大大缩短.同时初步分析了Re和体积分数Ψ对混合长度的影响.     

Experimental and discrete element numerical analysis of side slope instability induced by fissure water underlying impervious bed

1 Introduction The in situ observations and analysis on the landslide events indicate that water is one of the key factors which induce landslide of the mountain mass[1―8]. The mechanism offissure water inducing landslide can be generalized into three aspects: (1) the softening influence of water weakens the strength of materials on the slip surface[9―11]; (2) the cleft water pressure towards the slide slope free face increases sliding force[12―15]; (3) water pressure on the slip surface lo…