A novel strategy based on salp swarm algorithm for extracting the maximum power of proton exchange membrane fuel cell

Cell temperature and water content of the membrane have a significant effect on the performance of fuel cells. The current-power curve of the fuel cell has a maximum power point (MPP) that is needed to be tracked. This study presents a novel strategy based on a salp swarm algorithm (SSA) for extracting the maximum power of proton-exchange membrane fuel cell (PEMFC). At first, a new formula is derived to estimate the optimal voltage of PEMFC corresponding to MPP. Then the error between the estimated voltage at MPP and the actual terminal voltage of the fuel cell is fed to a proportional-integral-derivative controller (PID). The output of the PID controller tunes the duty cycle of a boost converter to maximize the harvested power from the PEMFC. SSA determines the optimal gains of PID. Sensitivity analysis is performed with the operating fuel cell at different cell temperature and water content of the membrane. The obtained results through the proposed strategy are compared with other programmed approaches of incremental resistance method, Fuzzy-Logic, grey antlion optimizer, wolf optimizer, and mine-blast algorithm. The obtained results demonstrated high reliability and efficiency of the proposed strategy in extracting the maximum power of the PEMFC.     

Study on maximum power point tracking of photovoltaic array in irregular shadow

Traditional maximum power point tracking (MPPT) methods can hardly find global maximum power point (MPP) because output characteristics curve of photovoltaic (PV) array may have multi local maximum power points in irregular shadow, and thus easily fall into the local maximum power point. To address this drawback, Considering that sliding mode variable structure (SMVS) control strategy have such advantages as simple structure, fast response and strong robustness, and P&O method have the advantages of simple principle and convenient implementation, so a new algorithm combining SMVS control method and P&O method is proposed, besides, PI controller is applied to reduce system chattering caused by switching sliding surface. It is applied to MPPT control of PV array in irregular shadow to solve the problem of multi-peak optimization in partial shadow. In order to verity the rationality of the proposed algorithm, the experimental circuit is built, which achieves MPPT control by means of the proposed algorithm and P&O method. The experimental results show that compared with the traditional P&O algorithm, the proposed algorithm can fast track the global MPP, tracking speed increases by 60% and the relative error decreased by 20%. Moreover, the system becomes more stable near the MPP, the fluctuations of output power is greatly reduced, and thus make full use of solar energy.     

基于改进模糊综合评价法的水利工程社会评价研究

通过对水利工程社会评价及模糊综合评价法的介绍,讨论了模糊层次分析法中的一致性检验问题,并采用改进的模糊综合评价法对江垭水利枢纽工程进行社会评价,得到综合评价结果。     

Computerized IR Determination of Structural Group Composition for High-Boiling Oil Fractions

A computerized form is given of IR spectral determination for structural group composition in high-boiling oil fractions by Berthold's method (7 structural elements) and Kuklinskii's method (28 structural elements), which reduces the analysis time by factors of 3–4 and improves the accuracy.     

应用改进BP网络对潼关高程的预测

作者在分析了影响汛前和汛后潼关高程变化值的因素的基础上，利用改进BP网络模型对非特征汛期和汛期潼关高程的变化值进行了计算。计算中不采用潼关的绝对高程，而用高程的变化量作为网络的较出物正量，从而减少计算误差，同时又能客观地考虑各影响因子的作用。改进后的BP模型学习时间短，精度满足要求。用该模型计算的潼关高程变化趋势与实际水库调度运行中的高程基本吻合。     

改进异步电机直接转矩控制系统的仿真研究

本文介绍了直接转矩控制系统的控制原理,并针对基于直接转矩控制的异步电动机运行时存在较大的电流及转矩脉动问题,提出一种新的控制方案,并基于Matlab 6.5对这种新方法进行仿真,仿真结果表明该方案能有效的解决电流及转矩脉动的问题.     

论BFe30—1—1冷凝管生产工艺及其改进的途径

论述了ＢＥｅ３０－１－１冷凝管生产工艺的优点及主要问题，对现行工艺提出了改进方案。     

AlNiCo52磁钢外观质量的改善

本研究在确保磁性能不降低的前提下，通过添加少量的添加元素或化合物，如难熔金属，稀土金属，稀土氧化物、钙化合物等，明显改善了定向结晶AlNiCo52（简称五类定向）磁钢的外观，有效地避免了铸造缺陷，从而大幅度地降低了生产成本，提高了生产效益。     

关于离散Kirchhoff薄板单元的研究

本文对离散Kirchhoff薄板单元进行了深入的分析。文中将用于建立离散Kirchhoff单元的泛函分为三部分,分别用应变第一不变量、绕Z轴的转动偶和有关的单元边界上的积分来表达,并阐明了各部分的作用。其中单元的收敛性质完全由第一、三部分所决定,而第二部分则控制了单元的计算精度。在此基础上,文中建议了一种提高离散Kirchhoff单元精度的新方法,并由此推导了一个任意四边形离散Kirchhoff单元。计算表明,本文的改进单元与原来的离散Kirchhoff单元及其改进型相比,计算精度有了显著提高。     

应用改进的BP神经网络预测导弹的研制费用

结合导弹武器系统研制的特点，分析并确定了影响导弹武器系统研制费用的主要因素，并在前人研究的基础上，提出了基于改进的BP神经网络的费用预测模型。该模型不仅克服了以往由于专家主观因素而造成的负面影响，而且提高了算法的运行效率和模型的预测精度。通过具体的实例分析比较，充分证明了利用该方法的科学合理性。最后探讨了利用BP神经网络进行数值预测的方法和应该注意的问题，并给出了一些有益的建议。