某型自行火炮负重轮轴承的模糊可靠性分析

负重轮轴承的可靠度直接影响到履带式自行火炮的机动性能。综合考虑轴承在制造和使用过程中的各种因素,结合自行火炮的典型任务剖面,运用模糊数学和可靠性理论,对某型履带式自行火炮负重轮轴承的可靠度进行了分析。     

Study on Steering Control Strategy for High-Speed Tracked Vehicle with Hydrostatic Drive

Steering control strategy for high-speed tracked vehicle with hydrostatic drive is designed based on analyzing the fundamental steering theories of the hydrostatic drive tracked vehicle. The strategy is completed by the cooperation between integrated steering control unit and pump & motor displacement controller. The steering simulation is conducted by using Simulink of Matlab. It is indicated that this steering control strategy can reduce the average vehicle speed automatically to achieve the drivers expected steering radius exactly in the case of ensuring not exceeding the system pressure threshold and no sideslip.     

四履带双摆臂机器人越障机理及越障能力

为发挥四履带双摆臂机器人的最佳越障性能,本文从运动学的角度,在固定双履带机器人越障机理的 基础上,分析了四履带双摆臂机器人克服台阶、斜坡、沟道等典型障碍的运动机理及其最大越障能力,重点研究了 四履带双摆臂机器人正向和反向两种攀越台阶方式的运动机理及其最大越障能力．以CUMT-II 型煤矿探测机器人 样机为例,绘制了机器人仰角、摆臂摆角与跨越台阶高度的3 维关系图,以及斜坡坡度与摆臂摆角关系曲线,并求 出了相应的最大越障能力的理论值,与实验室实测数据进行了对比分析．本文推导出机器人的最佳越障性能及对应 的质心和摆臂的位置,可为机器人越障时质心位置的控制提供理论依据．     

液压混合动力履带车辆联合制动模糊控制

针对液压混合动力履带车辆联合制动系统,为了实现制动过程平稳性,提出了基于制动力分配原则的模糊控制策略.首先在MATLAB中建立了能量再生制动系统和机械制动系统以及车辆动力学仿真模型,然后设计了以制动力分配系数为控制变量的联合制动模糊控制器,给出了模糊控制规则,建立了控制系统仿真模型,并在不同制动强度条件下对车辆制动过程进行仿真.仿真结果表明,联合制动模糊控制系统能够有效回收制动能量,同时与PID控制相比明显改善和提高了履带车辆制动过程稳定性.     

基于动力学分析的深海集矿机轨迹跟踪研究

分析深海集矿机轨迹跟踪的研究现状,研究集矿机的动力学模型,进行合理的简化,面向深海底采矿环境的特殊性、深海集矿机液压系统固有的强非线性、行走阻力随调节强度伴生变化等特征。基于非线性剪切力—位移关系的线性化方法和对动态阻力项引入一个前馈补偿项来消除伴生阻力方式,设计了一个基于带有前馈阻力补偿的线性反馈的控制器,较好地实现了集矿机轨迹跟踪;仿真结果验证了该算法的有效性。     

履带装甲车辆采用永磁无刷直流电动机驱动研究

阐述了履带装甲车辆电传动概念及其优点。提出采用永磁无刷直流电动机控制系统作为其驱动系统，建立了无刷直流电动机数字控制系统的数学模型，并将永磁无刷直流电动机控制系统在履带车辆电传动中进行应用，对应用情况进行了试验及分析，最后给出了应用可行性结论。     

Chain Vibration and Dynamic Stress in Three-Dimensional Multibody Tracked Vehicles

A three-dimensional computational finite element procedure for the vibration and dynamic stress analysis of the track link chains of off-road vehicles is presented in this paper. The numerical procedure developed in this investigation integrates classical constrained multibody dynamics methods with finite element capabilities. The nonlinear equations of motion of the three-dimensional tracked vehicle model in which the track link s are considered flexible bodies, are obtained using the floating frame of reference formulation. Three-dimensional contact force models are used to describe the interaction of the track chain links with the vehicle components and the ground. The dynamic equations of motion are first presented in terms of a coupled set of reference and elastic coordinates of the track links. Assuming that the structural flexibility of the track links does not have a significant effect on their overall rigid body motion as well as the vehicle dynamics, a partially linearized set of differential equations of motion of the track links is obtained. The equations associated with the rigid body motion are used to predict the generalized contact, inertia, and constraint forces associated with the deformation degrees of freedom of the track links. These forces are introduced to the track link flexibility equations which are used to calculate the deformations of the links resulting from the vehicle motion. A detailed three-dimensional finite element model of the track link is developed and utilized to predict the natural frequencies and mode shapes. The terms that represent the rigid body inertia, centrifugal and Coriolis forces in the equations of motion associated with the elastic coordinates of the track link are described in detail. A computational procedure for determining the generalized constraint forces associated with the elastic coordinates of the deformable chain links is presented. The finite element model is then used to determine the deformations of the track links resulting from the contact, inertia, and constraint forces. The results of the dynamic stress analysis of the track links are presented and the differences between these results and the results obtained by using the static stress analysis are demonstrated.     

Study on Modeling and Control Strategy for Electric Drive Motor of Tracked Vehicles

Aimed at the requirements for electric transmission system of a military tracked vehicle, the motor’s design indexes were analysed and calculated. A model based on saturate inductance parameter of interior permanent magnet (IPM) synchronous motor was brought forward by using finite element analysis. And its control strategy based on the largest running capability was studied also. The experiment results for a scale model show that the modelling method improves the model’s accuracy, and the motor’s control strategy is effective.