固定化微生物脱除工业酸性废气中H_2S的研究

以H 2软性填料作为氧化亚铁硫杆菌的固定化载体 ,构成了固定床生物反应器。在一定操作条件下 ,考察了固定床生物反应器对Fe2 +的氧化速率 ,最大可达 7.6 7g/ (L·h)。并对固定床生物反应器运行中在载体表面形成的络合物进行了研究 ,X射线衍射证明此络合物为黄钾铁矾 [KFe3(SO4 ) 2 (OH) 6]。     

Biodesulphurization of Hungarian lignite and sub-bituminous coal

The annual SO₂ emission is approx. 0.6 million tons in Hungary because of the high amount of sulphur in the power plant coals. Since Hungary has signed the European Environmental Agreement, the high sulphur emission has to be gradually reduced. To overcome the acid rain problem, the biodesulphurization of Hungarian power plant coals has also been started in Hungary. The R&D programe of biodesulphurization has been launched in 1990. According to our findings the biodesulphurization process is a suitable tool for reducing the pyritic sulphur content in lignite and sub-bituminous coal.     

Bioleaching of refractory gold ore （ Ⅱ ）——Mechanism on bioleaching of arsenopyrite by Thiobacillus ferrooxidans

1　ＩＮＴＲＯＤＵＣＴＩＯＮＢｉｏｌｅａｃｈｉｎｇｐｒｏｃｅｓｓｅｓｈａｖｅｂｅｅｎｕｓｅｄｅｘｔｅｎｓｉｖｅｌｙｔｏｒｅｃｏｖｅｒｂａｓｅｍｅｔａｌｓ (ｍａｉｎｌｙｃｏｐｐｅｒ)ａｎｄｕｒａｎｉｕｍｆｒｏｍｌｏｗ ｇｒａｄｅｏｒｅｓａｎｄｍｏｒｅｒｅｃｅｎ     

Ni2+、Cu2+、Zn2+对氧化亚铁硫杆菌氧化 活性影响

为研究金属离子对氧化亚铁硫杆菌（Acidithiobacillus ferrooxidans,At.f）氧化活性的影响,通过测定经初步驯化的At.f菌在不同初始pH下的生长活性,开展不同浓度梯度的Ni2+、Cu2+、Zn2+及三种金属离子共存时对At.f菌的氧化活性影响的试验。结果表明,当初始pH为1.8时,At.f菌生长活性最好,且低浓度的Ni2+、Zn2+对At.f菌氧化活性影响较小,对两种金属离子的耐受浓度均在20 g/L以上;而该细菌对Cu2+比较敏感,当Cu2+浓度为2.5 g/L时,菌株的生长活性明显下降,特别是10 g/L时,对At.f菌的氧化能力有显著的抑制作用。三种金属离子同时存在时对At.f菌氧化活性的影响大于单一金属离子,当三种金属离子的浓度均为2.5 g/L时,在48小时内对At.f菌的氧化能力有显著的抑制作用,当三种金属离子的浓度均为5 g/L时,80小时时菌株对Fe2+的氧化率极低,说明At.f菌需要经过多种金属离子共存驯化培养后才能更好地运用于多金属复杂矿物的处理。     

Modification of oxidizing activity of Thiobacillus ferroxidans by some particulate solids

Different particulate solids such as glass powder, various types of activated carbon and bentonite suspended in Thiobacillus ferrooxidans cultures produce very different effects on the oxidizing activity of the microorganism. The atmospheric oxygen uptake by Thiobacillus ferrooxidans in Warburg respirometer flasks containing 9K medium with ferrous sulfate as energy source and suspended bentonite is 2.8 times that in the absence of solids. The dissolution rate of pure pyrite in 250 cm³ shake flasks containing 9K medium and bentonite is considerably enhanced over that where the only solid phase is pyrite. Conversely, the oxidizing ability of the microorganism seems to be inhibited by all the activated carbons tested. The effect of ground glass seems to be related to its particle size distribution. Implications for the bioleaching of sulfide ores and coal pyrite are discussed in the light of current knowledge on the adsorption of Thiobacillus ferrooxidans cells on solid surfaces.     

New Method of Manufacturing Micro Parts Using Thiobacillus Ferrooxidans

A new method of processing and manufacturing certain parts of instruments through biological approach is studied. Knowledge of feasibility of micro-manufacturing is obtained by comparing experimental results of etching surfaces of copper, aluminium alloy, brass, steel and stainless steel using strain of Thiobacillus ferrooxidans (T.f.). Our experimental results show that certain metals can be etched using T.f., the most feasible material is copper, followed by brass, etc., with stainless steel the least. The surface of the stainless steel material is nearly unchanged during surface-etching. Micro parts made of copper or brass can be satisfactorily processed with T.f. and the rate of processing on copper is about 14?μm/h. Furthermore, surface roughness and processing speed are controlled by pH value and temperature of etching liquid, in addition to swing rate of the the swing bed.     

基于改良灰色理论的电网短期负荷预测算法

在分析传统灰色负荷预测理论与GM（1,n）模型的基础上,再次对GM（1,n）模型进行改进,以解决由于传统的灰色理论对原始数据要求的严格造成预测结果误差较大的问题。实验表明,用此方法建立的负荷预测模型,在预测精度上有较大的提高,为今后灰色理论模型的改进提供了一定的依据。     

直接驱动XY平台位置域轮廓跟踪控制

针对直接驱动XY平台轮廓误差近似模型建立困难的问题,提出一种提高轮廓跟踪性能的位置域轮廓跟踪控制方法.通过将双轴运动系统等效为主-从运动方式,主动轴(X轴)以位置量作为自变量,将从动轴(Y轴)的运动描述为不同轮廓跟踪要求的X的函数.通过从时域到位置域的一一映射,得到双轴运动系统的位置域动态模型.提出了位置域PD控制策略,主动轴运动以自身为参考产生的位置跟踪误差为零,仅有从动轴的运动跟踪误差影响到了最后的轮廓误差.仿真结果表明,位置域轮廓控制相比时域轮廓控制能够获得更好的跟踪精度.     

镁质低品位铁镍硫化矿的活化工艺及机理

细菌浸出是镁质低品位铁镍硫化矿的潜在处理方案之一。针对该矿石浸出活性较低的问题,研究了硫酸预浸出和硫酸铵焙烧预浸出2种活化方案,并与细菌直接浸出(空白试验)做了比较。结果表明,2种活化方案都有利于金属回收,但硫酸铵焙烧预浸出方案的活化效果更优:浸出时间为8 d时,Ni、Cu和Mg的浸出率分别为90.2%、89.56%和61.19%,分别高于硫酸预浸出方案2.08%、12.2%和8.95%。矿石中的Mg主要在硫酸铵焙烧预浸出阶段进入溶液,细菌对Mg浸出的影响不大。XRD和能谱分析表明:浸出渣中Ni和Cu的残留量很低,Mg主要存在于难浸出的蛇纹石之中。     

黄铁矿微生物浸出体系中的表面热力学和扩展DLVO理论

根据Young s方程的推导公式结合接触角的测定结果计算黄铁矿和氧化亚铁硫杆菌的表面能参数。结果表明,氧化亚铁硫杆菌的表面能明显高于黄铁矿的表面能。应用热力学计算氧化亚铁硫杆菌在黄铁矿表面吸附的自由能,发现其吸附自由能为正值,无法解释氧化亚铁硫杆菌在黄铁矿表面的吸附现象,而通过扩展DLVO理论建立的Lifshitz-van der Waals(LW)、Lewis acid-base(AB)和静电(EL)作用自由能与作用距离(d)之间的势能曲线,能够准确的预言氧化亚铁硫杆菌在黄铁矿表面的吸附现象。