Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

寒冷地区某既有办公建筑围护结构优化改造研究

既有公共建筑能耗中,围护结构节能潜力巨大。以兰州某既有办公建筑为例,采用DeST-C软件模拟围护结构不同材料厚度、窗型,得出系列负荷,通过对数据分析、比较,得出如下结论:外墙外保温适宜材料为50mm的挤塑板,最大热负荷节能率为45.66%;屋面适宜保温材料为65mm的挤塑板,最大热负荷节能率为4.25%;外窗各个朝向全部更换玻璃,推荐选用内张膜中空玻璃(双膜),最大热负荷节能率为7.36%;单独更换南向外窗材料,推荐选用真空镀膜复合中空玻璃,最大热负荷节能率为1.78%。     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

某住宅小区边坡渗水治理及综合利用

分析了某小区边坡渗水的原因，结合实际情况，介绍了边坡渗水的治理措施，并对渗水进行了收集综合利用，消除了边坡滑坡的安全隐患，取得了较好的社会效益和经济效益。     

图书在版编目研究

简述了英、美等国图书在版编目的发展和中国实施在版编目的意义、作用及特点,对中国实施图书在版编目提出了设想和建议。     

从图像的二维谱分析现行电视的缺陷

从图像的二维谱可以得出现行广播电视图像为什么不能满足人眼的视觉匹配以及现行电视制度的不足 ,从而对未来的高清晰度电视发展提出要求。     

现代住区规划的几点思考

通过对居住区规划中住区交通组织、环境建设,以及住宅配套现实处理方法的分析,指出现代住区的规划要根据当地实际情况,因地制宜组织住区交通网络,合理整合住宅内外环境,适度超前建设配套设施。     

Multifamily Housing Characteristics and Tenant Satisfaction

This paper examines the long-term impact of structural features and physical amenities on the residential satisfaction of renters in multifamily housing. A cumulative logit analysis of 7,206 rented multifamily units in the 2005 American Housing Survey indicates that features creating separated space (additional room, bathroom, garage/carport, or balcony/patio) were associated with significantly higher satisfaction, even when holding total unit area constant. Conversely, violation of space separation by noise intrusion through walls, floors, or ceilings created dramatically negative effects. Other amenities such as a fireplace, disposal, or dishwasher had no statistically significant impact. Tracking a cohort of 5,170 rented multifamily units from 1997 to 2005 revealed somewhat similar effects on the satisfaction trajectory of residents during this period. More bathrooms, bedrooms, and other rooms, as well as the presence of a balcony/patio were associated with satisfaction improvements. Analyzing cohort units undergoing modifications during the tracking period revealed that the addition of a bathroom or central air conditioning had the clearest impact on satisfaction, followed by the addition of a balcony/patio, other room, dishwasher, or garage/carport.     

Case Study-Based Challenges of Quality Concrete Finishing for Architecturally Complex Structures

This paper focuses on the procedure utilized in the construction of tilt-up irregular concrete panels that are constructed on-site using concrete slabs and wooden formwork. The case study required high-quality concrete finishing. The erection and installation procedure called for a maximum panel-to-panel joint tolerance of 1.27?cm (0.5?in.), often 90° joints between panels. To meet precision requirements, the casting slabs were leveled and flattened with laser screed technology and smoothed with chemical solutions. To ensure that the final result met expectations, a mock-up model was built using different types of materials and to simulate site constraints. The architectural design is a composition of precast concrete panels like “Lego” pieces assembled similarly to a jigsaw puzzle. The unique construction process required a state-of-the-art analysis to produce the set quality. Quality conditions as set by the owner included creating a smooth concrete surface on all panels while avoiding damages and reducing equipment and material costs. The proposed methodology is described through its implementation on the case study, which is also described in this paper.     

Indoor Air Quality: Exploring Policy Options to Reduce Human Exposures

Deciding between the different policy approaches available for reducing human exposures to indoor pollutants is an exceptionally complex task. These options can range from waiting until more definitive information is available to enacting regulatory standards, with many variations in between. This paper presents some of the factors policy-makers must consider in establishing indoor air quality policies, and the role researchers should play in ensuring that indoor air policies are based on the best available scientific information.