A mineralogical approach to evaluating laboratory scale acid rock drainage characterisation tests

Effective management of the risks associated with acid rock drainage (ARD) requires the ability to identify material with a potential to generate ARD reliably. With the increasing prevalence of quantitative mineralogy (Quantitative XRD, auto-SEM), opportunity exists to use mineralogy at all stages in ARD characterisation and prediction. This study uses a mineralogical approach across the head grade samples and the residues obtained under leach conditions of several common ARD characterisation tests (Acid Neutralising Capacity, Net Acid Generation), as well as the University of Cape Town (UCT) biokinetic test to evaluate the extent to which acid-neutralising minerals react. The results show the contribution of the carbonates to the acid neutralising capacity, as well as the partial dissolution of intermediate weathering silicate minerals such as chlorite and mica.     

The influence of sonication time on the biogenic amines formation as a critical point in uncured dry-fermented beef manufacturing

In this study, the influence of sonication time on the biogenic amines formation as a critical point in uncured dry-fermented beef manufacturing was studied. Samples of musculus semimembranosus were sonicated at different times (5 and 10 min) using ultrasound cold bath (4 °C) in acid whey (US 40 kHz and acoustic power 480 W). The effect of sonication on biogenic amine (BA) formation was investigated during 93 days of ripening period. Other parameters (pH value, water activity, microbial counts) that might provide further information on the product under study were also determined. The use of ultrasound during beef marinating in acid whey has a positive effect on retarding histamine (HIS), cadaverine (CAD), tyramine (TYR) and putrescine (PUT) formation. Moreover, the sonication treatment did not inhibit the growth of lactic acid bacteria (LAB) in dry-fermented beef during the whole ripening period. The pathogen bacteria (Staphylococcus aureus, Clostridium sp., Listeria monocytogenes) were not detected in all samples neither after 31 nor after 93 days of ripening period.     

微波辅助合成3,4-二氨基苯甲酸

以对氨基苯甲酸为原料,在微波辐射下经乙酰化、硝化、水解及还原反应制得3,4-二氨基苯甲酸(Ⅰ),总收率为67．6%(未用微波辐射时为40．7%),反应时间由6 h缩短为1 h,并探讨了合成条件。在n(p- H2NC6H4COOH):n(Ac2O)=1:2,微波功率800 w的条件下,回流5 min,对乙酰胺基苯甲酸(Ⅱ)的收率为93．8%;n(Ⅱ):n(Ac2O)=1:2,使用过量乙酸酐,在冰水浴中滴完浓硝酸后,在微波功率800 W,回流3 min后,4-乙酰氨基-3-硝基苯甲酸(Ⅲ)的收率为85．3%;在微波功率800 W条件下,Ⅲ与过量的w(KOH)= 50%乙醇溶液,回流5 min,3-硝基-4-氨基苯甲酸(Ⅳ)的收率为93．1%;在Ⅳ的乙醇溶液中,在回流温度下滴加w[(NH4)2S]=9%硫化铵溶液,然后,在微波功率800 W条件下,回流5 min,可得90．8%的目标产物Ⅰ。用IR、1H NMR对化合物Ⅰ～Ⅳ进行了表征。     

污水汽提系统的化学除臭清洗

文章简要介绍了化学除臭清洗剂JX-518的组成,并对采用该清洗剂对污水汽提系统进行化学除臭清洗的清洗过程及注意事项进行了详细介绍。实践证明,清洗后系统残液中硫化物及氨氮可降至很低,取得了很好的清洗效果。     

化学清洗后的钝化处理

介绍化工设备在化学清洗后进行钝化处理的必要性以及相关的钝化处理技术的原理、钝化剂性能、处理工艺。并指出使用环保型的钝化剂是今后钝化工艺的发展方向。     

CSTN-LCD用铬版清洗效果的改善

利用铬版清洗机对CSTN-LCD用铬版进行清洗处理,分析了清洗过程中出现的铬层脱落现象,铬层脱落与轴向喷射压力和水平切力密切相关,通过调整转速和喷射压力探索了安全使用条件:在转速不超过1000r/min,喷射压力低于0.5×105Pa的情况下使用铬版清洗机进行清洗是相对安全的。同时采用预清洗处理的方法满足清洁要求,使换线时间由平均3h缩短到平均1h以内,年产能提高270000片。     

牛奶加工过程中的清洗(二)

五．牛奶厂的清洗。目前，牛奶厂采用的清洗方式主要是CIP清洗(Cleaning in place)，原地清洗或称定置清洗，即在基本不拆卸或挪动机械装置和管线的情况下对生产过程中能与牛奶发生接触的设备表面进行的清洗。其冲刷、清洗、灭菌的整个过程全部实现了自动化因此大大降低了劳动强度。而有一些不     

燃气脉冲吹灰技术在催化裂化装置余热锅炉上的应用

吉化炼油厂催化裂化装置余热锅炉受热面采用螺旋翅片管结构，积灰严重，在第七0三研究所的积极参与合作下，哈尔滨哈宜电站设备研究研制开发了燃气脉冲吹灰装置系列产品，并应用于吉化炼油厂催化装置余热锅炉。应用结果表明，燃气脉冲吹灰装置每爆燃一个循环，余热锅炉排烟温度降低15－20℃，锅炉蒸汽产量增加1t/h，余热利用率提高3．4个百分点。     

浅析6063铝型材表面“铝丝印”的成因与对策

在介绍“铝丝印”概念的基础上，从金属腐蚀学的观点出发，分析了“铝丝印”形成的电化学腐蚀机理，并提出了具体的解决措施。