Polymer electrets and their applications

Polymer electrets have revealed great potential application in electromechanical devices because of the low weight, large quasi-piezoelectric sensitivity, and excellent flexibility. For an electret, a permanent and macroscopic electric field exists on the surface, principally led by a macroscopic electrostatic charge on the surface or a net orientation of polar groups inside the object. Here, progress in the development of polymer electrets is reviewed. After a brief retrospect of the research courses and those typical polymer electrets that are classified into fluorine polymer and nonfluorine polymer, we present a survey on the charging methods, including corona, soft X-ray, contact, thermal and monoenergetic particle beams. The latest representative applications (i.e., power harvesting, sensors, field effect transistors, and biomedicine) based on polymer electrets are also summarized. Finally, we complete this review with a discussion on perspectives and challenges in this field.     

Three-dimensional and anisotropic numerical analysis of a PEM fuel cell

In this study, the effects of cell temperature and relative humidity on charge transport parameters are numerically analyzed. In order to perform this analysis, three-dimensional and anisotropic numerical models are developed. The numerical models are integrated into the experimental values for anisotropic electrical conductivities, as depending on cell temperature and relative humidity, that were obtained from our previous study. The achieved results indicate that the values of current densities in the in-plane direction increase with increasing cell temperature and relative humidity, while the current densities reach a maximum in the rib regions for both the numerical model at the through-plane direction. The behaviors of electrolyte potentials are similar with changes in the cell temperature and relative humidity. In addition, the cathode electrical potentials in both the in-plane direction and through-plane direction do not change to a considerable amount with increasing cell temperature and relative humidity.     

Fabrication of barium titanate ceramics via digital light processing 3D printing by using high refractive index monomer

A digital light processing (DLP) technology has been developed for 3D printing lead-free barium titanate (BTO) piezoelectric ceramics. By comparing the curing and rheological properties of slurries with different photosensitive monomer, a high refractive index monomer acryloyl morpholine (ACMO) was chosen, and a design and preparation method of BTO slurry with high solid content, low viscosity and high curing ability was proposed. By further selecting the printing parameters, the single-layer exposure time was reduced and the forming efficiency has been greatly improved. Sintered specimens were obtained after a nitrogen-air double-step debinding and furnace sintering process, and the BTO ceramics fabricated with 80 wt% slurry shows the highest relative density (95.32 %) and piezoelectric constant (168.1 pC/N). Furthermore, complex-structured BTO ceramics were prepared, impregnated by epoxy resin and finally assembly made into hydrophones, which has significance for the future design and manufacture of piezoelectric ceramic-based composites that used in functional devices.     

From modification to mechanism: Supercritical hydrothermal synthesis of nano-zirconia

Nano-zirconia has been widely applied due to its excellent physical and chemical properties (e.g., high strength, corrosion resistance, oxygen ion conductivity). Existing preparation methods of nano-zirconia tend to require long reaction time, and the sizes of final particles are large with uneven distributions. Sub-/supercritical hydrothermal synthesis of nanoparticles is favored by researchers owing to controllable reaction process, uniform particle size distribution, good reproducibility, short reaction time, high conversion rate and harmlessness to environment. In this paper, the characteristics and mechanisms of dissolution, crystallization and growth of nano-zirconia during sub-/supercritical hydrothermal synthesis are systematically reviewed. The influences of process and material parameters on the size and purity of particles are analyzed. Then, the reaction mechanism and product phase transition mechanism during hydrothermal synthesis of zirconia are summarized to provide a theoretical reference for the oriented preparation. Finally, the improvement and commercialization of sub-/supercritical hydrothermal synthesis technology are evaluated, and the future research topics are proposed.     

Mathematical Modeling of Drying Processes of Selected Fruits and Vegetables

This study investigates the behavior of fruit and vegetable samples during drying. The experimental data are fitted to several different thin-layer drying models. Regression analysis is used to determine model parameters, while statistical indicators serve to evaluate the goodness of fit. The power function model gives the best fit for all examined samples. Based on this model, different drying and heat storage technologies can be combined to ensure that the required residual moisture content of an agricultural product is reached. It is demonstrated on the case of a specific Togolese processing plant that under favorable conditions, fossil fuel consumption can be decreased by 33 %.     

Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Bacterial spores in spices and dried herbs: The risks for processed food

Production and world consumption of spices are constantly increasing. Although the antimicrobial properties of some spices are well documented, their use in the agri-food industry is also responsible for microbial contamination and spoilage. Bacterial spores introduced by spices can withstand different preparation processes, particularly thermal treatments, leading to food alterations during storage. This review brings together data from the literature about the prevalence and concentrations of spore-forming bacteria in all commercially available spices. The sporeformers found in spices belong mainly to the genera Bacillus and Clostridium. Such contaminations are very common and sometimes reach high levels, as in pepper and turmeric. Bacillus licheniformis and Bacillus cereus are the most frequently detected species. Studying the harvesting, processing, and storage procedures for spices provides elements to explain why high prevalence and concentrations are observed. Spices are mostly produced in developing countries on small farms using traditional production methods. Spices become contaminated by bacterial spores in two main ways: by contact with soil during harvesting or drying, as for pepper, or by cross-contamination during the water-cooking step, as for turmeric. From these observations, we propose some recommendations. Different methods that can be used to eliminate bacterial spores from spices are presented indicating their efficiency and the limitations of their use.     

Iodine from brown algae in human nutrition,with an emphasis on bioaccessibility,bioavailability, chemistry,and effects of processing: A systematic review

Brown algae are becoming increasingly popular as a food source and dietary supplement in Europe and other Western countries. As they are highly rich in iodine, they represent a potential new dietary iodine source. Iodine deficiency has been re-emerging in Europe, and it is important to ensure adequate intake through one's diet. However, macroalgae, and especially brown algae, may contain very high amounts of iodine, and both iodine deficiency and excessive iodine may increase the risk of negative health effects. The iodine content of algae or foods containing algae is currently not regulated in the European Union. The aim of this paper is to review the literature to determine the chemical species of iodine in brown algae, the loss of iodine during processing, and the bioavailability and bioaccessibility of iodine. A systematic search of the literature was performed in April 2021, via the databases Web of Science and PubMed. The review includes studies of iodine in brown macroalgae in relation to bioavailability, bioaccessibility, processing and speciation. A meta-analysis was conducted in relation to the following topics: (i) the correlation between total iodine and iodide (I^–) content in brown algae; (ii) the correlation between the loss of iodine during processing and the I^– content; and (iii) the correlation between bioavailability and the I^– content. The bioavailability of iodine from brown algae was generally high, with in vivo bioavailability ranging from 31% to 90%. The in vitro bioavailability of iodine (2%–28%) was systematically lower than in vivo bioavailability (31%–90%), indicating an inadequate in vitro methodology. Processing may reduce the iodine content of brown algae, and a higher I^– content was positively correlated with increased iodine loss during processing. Although processing strategies may reduce the iodine content of brown algae significantly, the iodine content may still be high after processing. These findings may be used in food safety evaluations of brown algae as well as in the development of macroalgae-containing foods with iodine contents suitable for human consumption. Further research on processing techniques to reduce the iodine content in brown macroalgae are warranted.