浅谈酶在非接触印刷废纸脱墨中的应用

简要地介绍了纤维素酶、半纤维素酶和淀粉酶在非接触印刷废纸脱墨中的研究及其应用     

不同品种甜菜类型甜菜光合特性的研究

水文研究了甜菜生育期中不同品种类型甜菜的光合特性，结果表明在生育前期，高糖型品种的叶绿素含量高，而生育中前期以丰产型高，标准型介于二者之间，ＲｕＢＰ竣化酶活性的动态变化亦显这种趋势；在叶丛形成期和块根增长期，丰产型品种光合速度最高，在糖分积累期则以高糖型品种光合速度高；不同品种不同叶位的叶绿素含量与光合速率中呈正相关。     

The GNAQ T96S Mutation Affects Cell Signaling and Enhances the Oncogenic Properties of Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC), the most common malignant tumor in the liver, grows and metastasizes rapidly. Despite advances in treatment modalities, the five-year survival rate of HCC remains less than 30%. We sought genetic mutations that may affect the oncogenic properties of HCC, using The Cancer Genome Atlas (TCGA) data analysis. We found that the GNAQ T96S mutation (threonine 96 to serine alteration of the Gαq protein) was present in 12 out of 373 HCC patients (3.2%). To examine the effect of the GNAQ T96S mutation on HCC, we transfected the SK-Hep-1 cell line with the wild-type or the mutant GNAQ T96S expression vector. Transfection with the wild-type GNAQ expression vector enhanced anchorage-independent growth, migration, and the MAPK pathways in the SK-Hep-1 cells compared to control vector transfection. Moreover, cell proliferation, anchorage-independent growth, migration, and the MAPK pathways were further enhanced in the SK-Hep-1 cells transfected with the GNAQ T96S expression vector compared to the wild-type GNAQ-transfected cells. In silico structural analysis shows that the substitution of the GNAQ amino acid threonine 96 with a serine may destabilize the interaction between the regulator of G protein signaling (RGS) protein and GNAQ. This may reduce the inhibitory effect of RGS on GNAQ signaling, enhancing the GNAQ signaling pathway. Single nucleotide polymorphism (SNP) genotyping analysis for Korean HCC patients shows that the GNAQ T96S mutation was found in only one of the 456 patients (0.22%). Our data suggest that the GNAQ T96S hotspot mutation may play an oncogenic role in HCC by potentiating the GNAQ signal transduction pathway.     

Cu-Fe-Cr原位复合材料的纤维相结构

通过感应熔炼和冷拔变形制备了Cu 16Fe 2Cr原位复合材料 ,将铜基体选择腐蚀后提取出了纤维 ,采用SEM和TEM观察分析了纤维相结构。在较低的应变量 (η =1.6 7)时 ,纤维不均匀 ,随着变形量的增大 (η =5 .42 ) ,纤维外形变得均匀。在 η =5 .42时 ,一个显著的特点是单根Fe Cr纤维分为一些由晶界隔开的平行亚单元 (宽度约为 10 0nm) ,通过亚单元共同的 [110 ]衍射获得了晶粒之间的相对取向 ,相邻晶粒的取向角在 3°～ 15°之间。     

Cu-Fe-Cr原位复合材料中的纤维相

通过感应熔炼、铸造、锻造和冷拔变形制备了Cu-16Fe-2Cr(质量分数,％)原位复合材料,最终线材(其轧制后的冷拔变形量达到η=ln(A_0/A)=5.42,A_0和A分别为冷拔起始和冷拔后线材的横截面面积)的抗拉强度为980 MPa。将Cu基体选择腐蚀后提取出纤维,采用SEM和TEM观察分析纤维相组织形态。在较低的应变量时,一些Fe—Cr纤维保持着与铸态树枝晶相同的bcc单晶结构,选区电子衍射表明纤维已经形成了〈110〉织构。在较高的应变量时,单根Fe-Cr纤维分为一些由晶界隔开的平行亚单元(宽度约为100 nm),通过亚单元共同的[110]衍射获得了晶粒之间的相对取向关系,相邻晶粒的偏差角在11°—82°之间。根据Hall-Petch关系讨论了原位复合材料的强度问题。     

幽门螺杆菌尿素酶B亚单位特异性抗体检测方法的建立与评价

目的建立并评价幽门螺杆菌(Hp)尿素酶B亚单位(UreB)特异性抗体的检测方法。方法应用纯化的重组HpUreB作为包被抗原,建立检测HpUreB特异性抗体的ELISA间接法。以Hp抗体Western blot检测作为“金标准”,评价所建立方法的真实性和可靠性。结果检测血清特异性IgG的灵敏度为100·0%,特异度为97·7%,阳性预测值为97·2%,阴性预测值为100·0%,约登指数为0·977,符合率为98·7%,试验的一致率为98·5%;检测血清中总的特异性Ig灵敏度为97·1%,特异度为95·3%,阳性预测值为94·4%,阴性预测值为97·6%,约登指数为0·925,符合率为96·2%,试验的一致率为97·8%;检测唾液中特异性sIgA的灵敏度为96·2%,特异度为94·5%,阳性预测值为89·3%,阴性预测值为98·1%,约登指数为0·907,符合率为95·1%,试验的一致率为97·5%;检测粪便标本中的特异性sIgA的灵敏度为92·0%,特异度为90·2%,阳性预测值为85·2%,阴性预测值为94·9%,约登指数为0·822,符合率为90·9%,试验的一致率为98·6%,CV值均小于15%。结论该检测方法真实性、可靠性、重复性良好,能满足临床标本检测的要求。     

狗心脏中I_(to)相关钾离子通道表达分析

目的探讨钾离子通道Kv4·3和Kv1·4在正常与心衰的心肌组织中的表达差别,为进一步阐明心衰的发病机理奠定基础。方法建立狗的心衰模型,用Western blot方法对正常与心衰的狗心肌组织中Kv4·3、Kv1·4及辅助亚基Mink的表达进行分析。结果在心衰时,Kv4·3表达有明显下降;Kv1·4表达有所上升,在心肌组织的不同部位,即外层和内层Kv1·4的表达明显不同;同时Mink的表达在心肌外层也有明显下降。结论心衰时,心肌组织中形成Ito的钾离子通道Kv4·3和Kv1·4以及辅助亚基Mink的蛋白表达变化之间可能存在着一些相关性。     

Crystal transformation from the α- to the β-form upon tensile drawing of poly(l-lactic acid)

A film of poly(l-lactic acid) (PLLA) consisting of highly oriented α crystals was uniaxially drawn by tensile force. The effects of the draw ratio (DR), draw temperature (T_d), and draw stress on the crystal/crystal transformation from the α- to the β-form crystals were studied. At the initial stage of drawing, the highly oriented α crystals of the starting film transformed into a broader orientation distribution, and significant crystal disorder was introduced. Upon further drawing, the α crystals steadily transformed into β crystals with increasing the DR. For the drawing at a constant T_d, the crystal transformation proceeded more efficiently at a higher draw rate and, hence, at a higher draw stress. Furthermore, for the drawing at a constant draw rate, the transformation proceeded with DR most efficiently for the tensile draw at a T_d around 140 °C, although the draw stress increased with decreasing the T_d. The present result combined with the previous finding in the drawing of PLLA by solid-state extrusion [Macromolecules 36 (2003) 3601] suggests that there is a T_d of around 140 °C at which the crystal transformation proceeds most efficiently with DR, suggesting that there are two factors that have opposite effects on the efficiency of the crystal transformation with increasing the T_d. However, as a result of the combined effects of the T_d and DR on the crystal transformation and the ductility increase with the T_d, an oriented film consisting predominantly of β crystals was obtained by tensile drawing at a T_d in the range of 140-170 °C to the highest DR achieved at each T_d.     

上贝氏体精细结构的研究

用透射电镜研究上贝氏体铁素体的形成。观察到贝氏体条由更小的薄片状亚单元组成。沿贝氏体铁素体条纵向靠近平直边的母相中存在间断的应变场，其间隔尺寸与薄片亚单元的厚度对应。由于亚单元的横向尺寸差构成边界轮廓台阶。相变弛豫使亚单元间界和应变场逐渐消失。