Designed damping controller for SSSC to improve stability of a hybrid offshore wind farms considering time delay

This paper presents the stability improvement results of hybrid doubly fed induction generator (DFIG)-based and permanent magnet generator (PMG)-based offshore wind farms (OWFs) using a static synchronous series compensator (SSSC). An adaptive-network-based fuzzy inference system (ANFIS) controller of the proposed SSSC is designed to render adequate damping characteristics to the studied system. A frequency-domain approach based on a linearized system model using eigenvalue technique analysis is performed. A time-domain scheme based on a nonlinear system model subject to a three-phase short circuit fault at infinite bus with variations in the signal transmission delays has also been investigated to compare the damping of the studied system in cases of with and without controller. The simulation results with MATLAB/SIMULINK toolbox have been presented. It can be concluded from the simulation results that the proposed SSSC joined with the designed ANFIS damping controller can offer adequate damping performance to the studied hybrid DFIG-based and PMG-based OWFs under severe disturbance.     

Multi-discharge EDM coring of single crystal SiC ingot by electrostatic induction feeding method

A new technique of EDM coring of single crystal silicon carbide (SiC) ingot was proposed in this paper. Currently single crystal SiC devices are still of high cost due to the high cost of bulk crystal SiC material and the difficulty in the fabrication process of SiC. In the manufacturing process of SiC ingot/wafer, localized cracks or defects occasionally occur due to thermal or mechanical causes resulted from fabrication processes which may waste the whole piece of material. To save the part of ingot without defects and maximize the material utilization, the authors proposed EDM coring method to cut out a no defect ingot from a larger diameter ingot which has localized defects. A special experimental setup was developed for EDM coring of SiC ingot in this study and its feasibility and machining performance were investigated. Meanwhile, in order to improve the machining rate, a novel multi-discharge EDM coring method by electrostatic induction feeding was established, which can realize multiple discharges in single pulse duration. Experimental results make it clear that EDM coring of SiC ingot can be carried out stably using the developed experimental setup. Taking advantage of the newly developed multi-discharge EDM method, both the machining speed and surface integrity can be improved.     

黄浦江下游吴淞口站低潮位重现期研究

黄浦江为感潮河流,低潮位重现期的确定对黄浦江航道的设计具有重要意义。为了准确估计黄浦江低潮位的重现期,以黄浦江下游吴淞口站年最低潮位序列为例,在对样本进行三性审查的基础上,分别采用传统的数理统计方法和时变矩方法进行水文频率分析。结果表明:吴淞口站年最低潮位序列在1996年发生了变异;还现修正后的序列服从位置参数线性时变的GEV模型,低潮位存在缓慢的上升趋势;一致性条件下百年一遇低潮位约为0.261 m,在非一致性条件下其重现期增大为150 a。非一致性条件下的重现期增大说明黄浦江现有的航道设计标准偏安全,航道通航保证率提高。     

Modelling of black carbon statistical distribution and return periods of extreme concentrations

Eight datasets of 1-h black carbon (BC) concentrations measured in Warsaw agglomeration (Poland), at urban background and sub-urban sites, and in Racibórz, a small town in Upper Silesia district (regional background site) were analyzed to evaluate BC levels, daily profiles and statistical distributions of concentrations in Central-Eastern European region. The observed mean levels ranged from 1483 ng m⁻³ in suburban site during summer to 3358 ng m⁻³ in regional background site in winter. Observed diurnal patterns were bimodal in the locations dominated by traffic emissions, but unimodal, with elevated evening peak in individually heated residential area. Three theoretical frequency distributions were applied to fit analyzed datasets separately. The lognormal distribution was the most appropriate to represent the middle-range values, while the high concentrations were satisfactorily predicted by the type I two-parameter exponential distribution which was used to estimate the return periods of extreme concentrations for winter months.     

Attitude-behaviour dissonance regarding the importance of food preservation for customers

The aim of the study was to identify the importance of individual food product attributes (the use of preservatives, processing method, shelf-life period and nutritional value) as well as their relation to the purchase behaviour. To achieve this, consumer preferences were decomposed in conditions of full access to information, and data was compared with actual consumer behaviour related to making purchasing decisions in front of the store shelf. Based on data from 338 respondents, conjoint analysis and repeated ANOVA measurements were carried out, allowing to eliminate individual behavioural patterns. The results showed a dissonance between the consumers attitudes towards the attributes and their shopping behaviour. The processing method was the most important declared attribute for consumers, meanwhile this information was the least searched for during purchase. At the same time, shelf-life period marked as the least important was the main information searched for by consumers when shopping. The results also show a clear dislike towards the use of microwaves as a preservation method, while traditional thermal preservation was marked as the most positive for consumers. In addition, consumers were classified into 3 heterogeneous groups, identifying differences in the preferences of food attributes. The obtained results have practical value relating not only to the preferences of individual attributes, but also to their various variants. The results can be a guide for companies to properly label food products. The indicated dissonance illustrates the educational gap and related insufficient motivation to get to know the product before buying it. This is extremely important in connection with technological development and new food processing methods.     

Survey on Passivity Based Control of Induction Machine

Induction machines (IM) constitute a theoretically interesting and practically important class of nonlinear systems. They are frequently used as wind generators for their power/cost ratio. They are described by a fifth‐order nonlinear differential equation with two inputs and only three state variables available for measurement. The control task is further complicated by the fact that IM are subject to unknown (load) disturbances and the parameters can be of great uncertainty. One is then faced with the challenging problem of controlling a highly nonlinear system, with unknown time‐varying parameters, where the regulated output, besides being unmeasurable, is perturbed by an unknown additive signal. Passivity‐based control (PBC) is a well‐established structure‐preserving design methodology which has shown to be very powerful to design robust controllers for physical systems described by Euler‐Lagrange equations of motion. PBCs provide a natural procedure to "shape" the potential energy yielding controllers with a clear physical interpretation in terms of interconnection of the system with its environment and are robust vis á vis to unmodeled dissipative effects. One recent approach of PBC is the Interconnection and Damping Assignment Passivity‐Based Control (IDA‐PBC) which is a very useful technique to control nonlinear systems assigning a desired (Port‐Controlled Hamiltonian) structure to the closed‐loop. The aim of this paper is to give a survey on different PBC of IM. The originality of this work is that the author proves that the well known field oriented control of IM is a particular case of the IDA‐PBC with disturbance.     

平面阵列波导光栅波导模式参量的分析

用周期波导的方法分析平面阵列波导光栅(AWG)的本征方程及波导模式参数,结果表明波导传播常数是带状分布的,与波导间隔有关。分析结果对器件的优化设计有一定的指导意义。     

传感器管理及其在相控阵雷达中的应用

传感器管理是数据融合的一部分。介绍了传感器管理的概念和框架 ,概述了国内外传感器管理算法的研究现状。主要工作是针对相控阵雷达这一传感器 ,通过对其不同工作模式以及不同参数的管理 ,来说明传感器管理的原理。提出了一种新的自适应采样周期算法 ,仿真结果表明该算法的优越性     

现役水工钢闸门结构可靠性鉴定时荷载取值分析

采用类比法确定现役水工钢闸门结构的荷载评估基准期。以静水压力为例，得了其在荷载评估基准期内的统计参数，讨论了闸门主梁受弯碱坏时可靠指标随继续使用期的变化。     

TCP稳态流中慢启动序列对吞吐量性能的影响

在计算TCP稳态数据流吞吐量时一般都忽略了由于分组丢失而形成的各个慢启动阶段。在考虑TCP稳态数据流中慢启动序列的情况下,对Padhye的经典TCP稳态数据流模型进行了扩展。通过将Padhye的模型与扩展后的模型作比较,证明了在使用Padhye的模型作为多媒体流量控制模型时忽略超时后慢启动阶段的可行性和正确性。