共面波导有限金属厚度效应的研究

用保角变换法对共面波导金属厚度效应进行了理论分析，编制了相应的计算机程序，给出了数值解，并对此进行了多元曲线拟合，导出了考虑金属厚度后的形状比k、有效介电常数、特征阻抗、损耗的闭定表达式。用此修正表达式求得特征阻抗及损耗的数值解，并与K．C．格普塔的修正值及实验测量值进行了详细比较，结果表明此修正公式与实验值相符较好。     

Adaptive Edge Detectors for Piecewise Smooth Data Based on the minmod Limiter

We are concerned with the detection of edges—the location and amplitudes of jump discontinuities of piecewise smooth data realized in terms of its discrete grid values. We discuss the interplay between two approaches. One approach, realized in the physical space, is based on local differences and is typically limited to low-order of accuracy. An alternative approach developed in our previous work [Gelb and Tadmor, Appl. Comp. Harmonic Anal., 7, 101–135 (1999)] and realized in the dual Fourier space, is based on concentration factors; with a proper choice of concentration factors one can achieve higher-orders—in fact in [Gelb and Tadmor, SIAM J. Numer. Anal., 38, 1389–1408 (2001)] we constructed exponentially accurate edge detectors. Since the stencil of these highly-accurate detectors is global, an outside threshold parameter is required to avoid oscillations in the immediate neighborhood of discontinuities. In this paper we introduce an adaptive edge detection procedure based on a cross-breading between the local and global detectors. This is achieved by using the minmod limiter to suppress spurious oscillations near discontinuities while retaining high-order accuracy away from the jumps. The resulting method provides a family of robust, parameter-free edge-detectors for piecewise smooth data. We conclude with a series of one- and two-dimensional simulations.To David Gottlieb, on his 60th birthday, with friendship and appreciation.     

膜-粉末炭反应器净化微污染源水

采用膜-粉末炭反应器处理微污染源水的试验结果表明,该工艺对水中的有机物具有较好的净化效果,在水温《10℃的条件下,处理可生化性很低的三家店水库水时对CODMn的去除率仍保持在65%左右;工艺对CODMn、UV254、UV410的去除效果依次增强.     

多级并接型权电阻DAC的设计

多级并接型权电阻解码网络结构简单，分析方便，文章给出了普通的和BCD码多级并接型权电阻解码网络，推导出了各级与运放的连接电阻的通用公式，并用EWB软件进行了电路模拟，这种方法对自行设计权电阻DAC有一定的参考价值。     

化学计算与图形处理软件设计

近年来 ,化学计算与图形处理越来越受到重视 ,许多用于微机计算的精确公式也相继发表 .介绍了酸碱滴定曲线通用计算公式、络合滴定通用计算公式、氧化还原滴定通用计算公式、混合体系缓冲容量的通用算法以及这些公式在图形处理中的应用 .简要介绍了笔者以Delphi5.0为平台处理图形时的流程及思路 .     

Accurate and simple synthesis formulas for coplanar waveguides

Simple and accurate closed‐form formulas obtained by using a differential evolution algorithm are presented for the synthesis of coplanar waveguides (CPW). The results of the synthesis formulas proposed in this article are compared with those of the quasi‐static analysis, the synthesis formulas reported by the other researchers and also the experimental works available in the literature. The accuracy of the proposed synthesis formulas is found to be better than 0.75% for 9256 CPWs samples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.     

掺矿渣微粉和粉煤灰的水泥胶砂性能试验研究

 根据正交设计法,利用L24(61×41×23)正交表安排试验,探讨了混合材掺 量、矿渣微粉与粉煤灰的比例、矿渣微粉细度、粉煤灰品种对水泥胶砂流动度、7,28,90 d 龄期的抗压强度的影响,初步确定水泥熟料、矿渣微粉、粉煤灰三元体系的较优组合。结果 表明,粉煤灰与矿渣微粉双掺比单掺矿渣微粉或单掺粉煤灰的水泥胶砂,具有一定的优势。     

“金属布”硬质复合涂层的微观组织及性能

用Ｘ射线衍射仪、扫描电镜、摩擦磨损试验等，研究了粉末冶金“金属布”及其钢表面改性技术在钢表面制备的ＷＣ－Ｎｉ系合金复合涂层的微观组织和性能。结果表明：该合金涂层中硬质相的体积含量可大于６０％；涂层的微观组织有两类：一种是在粘结相中均匀分布的碳化物与弥散分布的球状粘结相富集区构成的非均匀结构；另一种是碳化物和粘结相都均匀分布的均匀结构。碳化物分布区的硬度大于Ｈｖ１０７６，粘结相富集区的硬度在Ｈｖ９６７～Ｈｖ４５８之间。涂层与钢基体之间有几～几十微米的界面过渡区，形成剪切结合强度大于４００ＭＰａ的冶金结合。复合涂层的耐磨性明显优于调质Ｔ８工具钢。     

Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003     

降低炉上温度减少潜热损失

从理论和实验数据论述了降低炉上温度可降低挥发分的逸出量，减少气体带出的粉煤量，进而降低造气过程中的潜热损失。指出控制较低的炉上温度对于降低合成氨造气煤耗具有重大的实际意义。