Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

Investigation of Centreline Segregation and Centreline Porosity in CC ‐ Slabs

Improvements of solidification processing in conventional or near net shape casting depend on sophisticated methods of macroscopic examination of central unsoundness and inhomogeneity of the cast material. As long as remarkable deviations referring to the quality features exist between the slab centre and the bulk material such methods should be looked after. Two semi‐macroscopic methods of segregation analysis are discussed in this paper: firstly, the potential of the emission spectral analysis combined with sectioning of a sample and secondly, the computer aided micro‐probe analysis. Both methods are restricted to small local areas. The proneness of elements and steel grades with respect to micro‐ and macrosegregation as well as distribution‐ and segregation coefficients are determined. The effect of a diffusion anneal on homogenisation of segregation is studied. Last not least the precipitation of sulphides, phosphides or carbonitrides is estimated. Ultrasonic detection of the central unsoundness of conventional slabs or thin slabs is a new approach towards a quantitative macroscopic examination. The sample size is 400 mm x 300 mm x 30 mm. To achieve a low ultrasonic noise using a 5 MHz‐transducer the samples are heat treated for grain refinement. “Dog bone porosity”, macroscopic topographical misfit between the upper and lower solidifying shells, periodical corner cracks or systematic transverse centre cracks are detected. Obviously, segregations do not reflect the ultrasonic beam. However, it can be presumed that an interrelation exists between porosity and segregation, although these might be locally apart from each other. This new ultrasonic test of the central unsoundness of continuous cast (c.c.) slabs gives valuable arguments to machine builders and maintenance people to decide on the right concepts for strand guidance, support rollers and secondary cooling. Soft reduction can be optimized and variations in casting speed counteracted by dynamic means. R&D service of this kind can help steelmakers when decisions are impending to build new casting machines or revamp old ones.     

Edge detection,three-dimensional cell boundary reconstruction and volume and surface area estimation from differential interference contrast images

Three-dimensional (3-D) cell morphology is important for the understanding of cell function and can by quantified in terms of volume and surface area. Differential interference contrast (DIC, or Nomarski) imaging can enable cell edges to be clearly visualized in unstained tissue due to the slight difference in refractive index between aqueous media and cytoplasm. DIC is affected in only one direction - the direction of the optical shear. A 1-D edge detector was used in that direction with a scale length equal to that of an in-focus edge to highlight cell boundaries. By comparison with the signal from the edge detector on an out-of-focus slice, the in-focus slices could be segmented and, after noise suppression, cell outlines obtained. A voxel paradigm was used to calculate cell volume and differential geometry was used for surface area estimation. We applied this approach to obtain 3-D dimensional information by optical sectioning of motile Amoeba proteus.     

超薄氧化层中的中性陷阱对隧穿电流的影响和应变诱导漏电流

用数值分析的方法讨论了中性陷阱对超薄场效应晶体管(MOSFET )隧穿电流的影响.中性陷阱引起势垒的变化在二氧化硅的导带中形成一个方形的势阱.对于不同的势垒变化,计算了电子隧穿氧化层厚度为4nm的超薄金属氧化物半导体结构的电流.结果表明,中性陷阱对隧穿电流的影响不能被忽略,中性陷阱的存在使隧穿电流增加,并且通过这个简单的模型能够理解应变诱导漏电流的产生机制.     

LB技术制备大面积超薄PMMA抗蚀层的研究

采用自行研制的ＬＢ自动提膜装置，制备出大面积（１０×８ｃｍ２）、高质量的ＰＭＭＡ超薄抗蚀剂膜，并将其用于高分辨率铬掩模版的研制。通过电子束曝光，湿法蚀刻，制作了分辨率优于０．５μｍ，特征线宽０．３８μｍ的４（１００ｍｍ）铬掩模版。     

SiO2微粉分形分布对超薄切割砂轮片拉伸性能的影响

在研究利用光敏树脂快速成型工艺制作超薄切割砂轮片时，发现往光敏树脂中添加适量的SiO2微粉，光敏树脂的拉伸强度明显增加。添加的SiO2微粉的用量的不同，在光敏树脂中形成的分形分布不同，对光固化成型后的超薄切割砂轮片的拉伸强度有不同的影响。本文通过研究SiO2微粉在光敏树脂中分布特征，根据分形理论，用分形维来描述其分布特征及其对光敏树脂光固化成型后的超薄切割砂轮片的拉伸性能的影响。     

Laser range scanner based on self-calibration techniques using coplanarities and metric constraints

In this paper, we propose a novel method to achieve both dense 3D reconstruction of the scene and estimation of the camera intrinsic parameters by using coplanarities and other constraints (e.g., orthogonalities or parallelisms) derived from relations between planes in the scene and reflected curves of line lasers captured by a single camera. In our study, we categorize coplanarities in the scene into two types: implicit coplanarities, which can be observed as reflected curves of line lasers, and explicit coplanarities, which are, for example, observed as walls of a building. By using both types of coplanarities, we can construct simultaneous equations and can solve them up to four degrees of freedom. To upgrade the solution to the Euclidean space and estimate the camera intrinsic parameters, we can use metric constraints such as orthogonalities of the planes. Such metric constraints are given by, for example, observing the corners of rectangular boxes in the scene, or using special laser projecting device composed of two line lasers whose laser planes are configured to be perpendicular.     

鳝鱼自动剖切机设计与试验

目的：设计一款专门用于剖杀细长且表面光滑的鱼类剖切机构。方法：以表体黏滑的鳝鱼为研究对象,开展夹持与剖切作业机理分析。以剖切质量和剖切时间为试验指标,探究夹轮转速、剖刀转速、夹轮表面几何形状等主要参数对剖切质量和剖切时间的影响规律。结果：影响剖切质量的主要因素为刀片转速和夹持轮限位高度,影响剖切时间的最主要因素为夹轮转速。当夹轮限位高度为5 mm、刀片转速为1 350 r/min、夹轮转速为167 r/min时,可获得较高的剖切质量评分与剖切时间。结论：使用夹持轮可以有效输送鳝鱼,通过调配夹持轮转速、刀片转速和限位高度可以实现高效高速剖腹。     

A Cost‐Efficient Bifunctional Ultrathin Nanosheets Array for Electrochemical Overall Water Splitting

The design of cost‐efficient earth‐abundant catalysts with superior performance for the electrochemical water splitting is highly desirable. Herein, a general strategy for fabricating superior bifunctional water splitting electrodes is reported, where cost‐efficient earth‐abundant ultrathin Ni‐based nanosheets arrays are directly grown on nickel foam (NF). The newly created Ni‐based nanosheets@NF exhibit unique features of ultrathin building block, 3D hierarchical structure, and alloy effect with the optimized Ni₅Fe layered double hydroxide@NF (Ni₅Fe LDH@NF) exhibiting low overpotentials of 210 and 133 mV toward both oxygen evolution reaction and hydrogen evolution reaction at 10 mA cm^?2 in alkaline condition, respectively. More significantly, when applying as the bifunctional overall water splitting electrocatalyst, the Ni₅Fe LDH@NF shows an appealing potential of 1.59 V at 10 mA cm^?2 and also superior durability at the very high current density of 50 mA cm^?2.