MTBE生产过程中丁烯-1的异构化

在固定床反应器上利用醚化后碳四研究了丁烯－1的异构化问题，原料中不含甲醇时，丁烯－1的异构化现象非常明显，甲醇能起到抑制异构化的作用，且含量越高，效果越好，原料中甲醇含量高于1．5％的条件下，65℃时丁烯－1几乎不发生异构化，75摄氏度发生异构化，且空速越低，异构化率越高。     

哈尔滨炼油厂MTBE装置试生产

介绍了哈尔滨炼油厂ＭＴＢＥ装置的工艺路线、新技术的应用及特点；催化剂的装填及应用情况；总结了生产过程中遇到的一系列问题及解决办法；探索了平稳生产的新徐径，以保证装置安全、平稳、长周期运行；同时对反应器操作温度、催化蒸馏塔操作压力、原料中醇烯比等因素对异丁烯转化率及ＭＴＢＥ产品的影响做了简单的总结。     

合成2,4-二叔丁基苯酚工业试验

以离子交换树脂为催化剂，苯酚和甲基叔丁基醚为原料合成2，4-二叔丁基苯酚(简称2，4酚)，合成产物经过滤再经间歇真空精馏精制提纯，得到高纯度的2，4酚成品。成品精馏后釜中残液在酸性白土催化剂的作用下通过歧化反应生成对叔丁基苯酚，再经精馏提纯得到成品对叔丁基苯酚。通过工艺优化，使2，4酚、对叔丁基苯酚形成联产生产工艺，降低了生产原料消耗和成本。     

MTBE生产工艺的技术改进

通过对传统MTBE装置工艺流程进行分析 ,找出了各个操作单元存在的问题 ,并结合实际操作数据 ,逐一提出了具体的解决方案 ,进一步优化了传统醚化装置工艺流程。达到了生产装置规模不变 ,而投资大大减少的目的。给今后新上同类装置的工艺流程设计 ,提供了较好的技术借鉴。     

Photocatalytic degradation of methyl tert‐butyl ether (MTBE) in contaminated water by ZnO nanoparticles

BACKGROUND: Over the past several decades methyl tert‐butyl ether (MTBE) as additive to gasoline, intended to either boost ratings of fuel or to reduce air pollution, has been accepted worldwide. Since MTBE has high water solubility, the occurrence of fuel spills or leaks from underground storage tanks or transferring pipeline has led to the contamination of natural waters. In this study the degradation of aqueous MTBE at relatively high concentrations was investigated by a UV‐visible/ZnO/H₂O₂ photocatalytic process. The effects of important operational parameters such as pH, amount of H₂O₂, catalyst loading and irradiation time were also investigated. Concentration of MTBE and intermediates such as tert‐butyl formate and tert‐butyl alcohol were measured. RESULTS: Time required for complete degradation increased from 20 to 150 min when the initial concentration was increased from 10 to 500 mg L^?1. The first‐order rate constants for degradation of MTBE were estimated to be 0.183–0.022 min^?1 as the concentration increased from 10 to 500 mg L^?1. Study of the overall mineralization monitored by total organic carbon analysis showed that at an initial concentration of 100 mg L^?1 MTBE complete mineralization was obtained after 100 min under UV‐visible/ZnO/H₂O₂ photocatalysis. CONCLUSION: The data presented in this paper clearly indicated that UV‐visible/ZnO/O₂ as an advanced oxidation process provides an efficient treatment alternative for the remediation of MTBE‐contaminated waters. Copyright © 2008 Society of Chemical Industry     

分离有机/有机混合物的PVA、CA系列膜及其渗透汽化性能研究(Ⅱ) 成膜条件对渗透汽化性能的影响

用溶剂完全蒸发法制备了PVA复合膜 .经对MTBE/MeOH混合物的分离实验得到了PVA复合膜的最佳成膜条件 ,即 :铸膜液中PVA、马来酸浓度分别为 7%、3% ,热处理温度130～ 15 0℃ .在 1%～ 2 %丙酮水溶液中浸泡处理 4～ 8h ,CTA中空纤维RO膜被改性成渗透汽化膜 .CTA中空纤维膜的分离性能优于其它醋酸纤维素系列膜 ,PVA/CA复合膜的性能优于PVA/PAN复合膜和CA/PAN复合膜     

Optimization of reactive SMB and Varicol systems

A comprehensive optimization study on a simulated moving bed reactor (SMBR) system is reported in this article for the direct synthesis of methyl tertiary butyl ether (MTBE) from tertiary butyl alcohol (TBA) and methanol. The applicability of the Varicol process, which is based on non-synchronous shift of the inlet and outlet ports, is explored for the first time for a reactive system. Multi-objective (two and three objective functions) optimization has been performed for both existing as well as design stage for SMBR and Varicol systems and their efficiencies are compared. The optimization problem involves relatively large number of decision variables; both continuous variables, such as flow rates in various sections and length of the columns and discrete variables, such as number of columns and column configuration. Pareto optimal solutions are obtained. It is observed that a five-column Varicol performs better than an equivalent five-column SMBR and its performance is nearly equal to that of a six-column SMBR in terms of purity and yield of MTBE and minimal eluent consumption. This is an important inference as it enables the reduction of fixed and operating costs while at the same time helps to achieve high purity and yield of the desired product and conversion of the limiting reactant. A state-of-the-art optimization technique, viz., non-dominated sorting genetic algorithm (NSGA), which allows handling of these complex optimization problems, is employed for this study. This is the first time that, not only the separating potential of Varicol has been extended to reaction systems, but also was optimized for multiple objectives.     

O3/H2O2 Treatment of Methyl-terf-Butyl Ether in Contaminated Waters: Effect of Background COD on the O3-Dose

The destruction of methyl-tert-butyl ether (MTBE) in contaminated waters by O₃/H₂0₂ process was studied and the influence background COD, alkalinity, and hydrogen peroxide and MTBE concentrations on process treatment efficiency and ozone dosage was investigated. The treatment efficiency was evaluated by an Efficiency Index, which is based on electrical energy requirement for ozone production. It was found that the treatment efficiency decreases linearly with increasing concentrations of MTBE at constant background COD and with background COD at constant MTBE concentration. A simplified kinetic scheme was presented to account for these observations.     

MTBE辛烷值测试法的探讨

MTBE作为调合生产高标号无铅汽油的重要的高辛烷值组分油，准确测试其辛烷值在汽油调和生产中具有重要的意义。初步探讨了MTBE研究法辛烷值的测试方法，尝试了用甲苯标准燃料做参比燃料直接测定其净辛烷值，同时也测定了MTBE的混配辛烷值，通过MTBE辛烷值的测试，了解了MTBE的调和效应，确认了在石油二厂无铅汽油调和生产中对催化汽油的MTBE的真实辛烷值约为108／RON，指导了车用无铅汽油的调和生产。     

Gas phase synthesis of MTBE on fluoride-modified zeolites

The gas phase synthesis of MTBE was studied using three series of zeolites modified by ion-exchange with ammonium fluoride, the parent materials being HY, H-mordenite, and HZSM-5. Modification of zeolites by fluoride-exchange was found to enhance the MTBE synthesis activity for all three types of zeolites without impairing their excellent selectivity to MTBE. The mechanism of activity enhancement by fluoride-modification appears to be related to the formation of extra-lattice Al rather than the presence of fluoride-ions.