采用同心旋转调制盘的红外检测系统

介绍了采用同心旋转调制盘和相应的逻辑门积分计数的积累检测技术的基本原理，并给出采用同心旋转调制盘的红外检测系统的基本结构，介绍了同心旋转调制盘系统的设计方法，通过对实验结果进行分析，表明同心旋转调制盘技术在红外检测系统应用中可以大大地改善系统的性能，提高了探测概率，降低了虚警概率。同时分析了该系统存在的问题，为红外检测技术的进一步发展提供一些经验。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

在N-数字小数分频器中的作用

分析了∑－△对S／N的改善作用，将∑－△在A／D中的应用引入到N－数字小数分频器中，简述了∑－△对N－小数分频器输出相位抖动的改善，提出用单级∑－△累加器级代多级累加器级联复用概念。     

强隐私保护的移动群智感知方案

为了实现移动群智感知系统中身份隐私、证书撤销和积分激励功能,同时解决恶意用户身份追踪与诚实用户隐私保护之间的矛盾,提出了强隐私保护的移动群智感知方案.基于门限密码思想将身份追踪能力分散到多个实体上,使得多个追踪者合作才能追踪用户身份;将Pointcheval-Sanders签名和基于RSA假设的Camenisch-Lysyanskaya累加器结合起来实现了证书的安全快速撤销;利用Pointcheval-Sanders签名构造了保护隐私的积分激励机制.对该方案进行了安全性分析和实验分析.研究结果表明,该方案不仅满足安全要求,而且在实际应用中具有可行性.     

双作用变量叶片泵自动控制系统的机理分析

文章介绍了一种双作用变量叶片泵自动控制系统,通过电脑控制变频器,改变叶片泵转速,达到粗调目的;电脑控制电液数字阀,起微调作用.蓄能器的利用,进一步增了系统的稳定性.     

蓄能器在全液压注塑机的应用以及节能效果研究

为了节约传统液压注塑机液压阀溢流损耗能量,对传统的全液压注塑机的油路进行改造,加入自行研制的蓄能器节能模块;对改造完成的节能注塑机进行能耗测试并与未改造的传统注塑机进行能耗比较,发现蓄能器模块加入液压注塑机后的整机能耗有明显降低,能实现预期的节能降耗目的;在不同的塑化注射压力下、不同的塑化背压下、不同保压时间下,对节约能耗数据进行测量分析,并从机理上分析能耗数据的差异,研究蓄能器模块使液压注塑机能耗降低的原因.     

一种基于FPGA的高精度同步信号生成设计与实现

针对特定通信系统中需要实现快速、高精度的时间同步需求,设计了一种基于 FPGA 同步信号生成的系统方案。系统以C/A码码片为最小时间刻度,通过对信号中码片数计数输出秒脉冲信号,并在同源情况下,根据码相位累加器溢出后残余值的特点,调整秒脉冲信号的输出位置。结果表明,调整后的秒脉冲信号同步精度能达到纳秒级,在工程上具有一定的应用价值。     

ANALYSES OF ENERGY LOSSES AND ACCUMULATOR AND PARAMETERS DESIGN METHOD OF HYDRAULIC IMPACTOR MECHANISM

ＡＮＡＬＹＳＥＳＯＦＥＮＥＲＧＹＬＯＳＳＥＳＡＮＤＡＣＣＵＭＵＬＡＴＯＲＡＮＤＰＡＲＡＭＥＴＥＲＳＤＥＳＩＧＮＭＥＴＨＯＤＯＦＨＹＤＲＡＵＬＩＣＩＭＰＡＣＴＯＲＭＥＣＨＡＮＩＳＭ￥Ｈｅ，Ｑｉｎｇｈｕａ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌＥｎ...     

Vanishing point detection using cascaded 1D Hough Transform from single images

Vanishing point detection algorithms based on 2D histogramming techniques have been employed in a variety of computer vision systems. Previous algorithms achieved some good results but still failed to maintain a balanced performance in both accuracy and time. Recent research (Li et al., 2010) shows that, vanishing point detection could be converted to a 1D histogram search problem, which largely accelerates the procedure. In this paper, we further improve this idea and propose a complete scheme for vanishing point detection from images of the so called “Manhattan world”. We test our algorithm and some commonly used vanishing point detection methods on public database YorkUrbanDB and our own implemented database PKUCampusDB. Our algorithm shows significant performance improvements.     

Fluid-solid coupling numerical simulation of charge process in variable-mass thermodynamic system

A joint solution model of variable-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated by the finite element method (FEM). The results are basically consistent with relative experimental data. The calculated average heat transfer coefficient reaches 1.7×10⁵ W/(m² · K). When the equal percentage valve is used, the system needs the minimum requirements of valve control, but brings the highest construction cost. With the decrease of initial steam pressure, the heat transfer intensity also weakens but the steam flow increases. With the initial water filling coefficient increasing or the temperature of steam supply decreasing, the amount of accumulative steam flow increases with the growth of steam pressure. When the pressure of steam supply drops, the steam flow gradient increases during the maximum opening period of control valve, and causes the maximum steam flow to increase.