Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

南水北调西线工程可调水量分析

在受水区缺水形势严峻的情况下，引水工程可调水量的确定主要与三个因素有关：一是引水河流及引水坝址径流量；二是坝址上下游用水要求；三是引水水库工程规模。在考虑各种因素影响后，提出各引水坝址可调水量占坝比径流量的比例在70％左右比较合适，按现阶段推荐的两种方案，可调水量可达160亿－170亿m^3.     

一种新型三坐标雷达点迹提取器的设计

在目标信号检测模块的基础上增加了测有计算模块，构成一种新型的单脉冲雷达点迹提取器，显著提高了雷达系统潜在的处理能力。     

基于神经网络的降雨径流预报

本文将人工神经网络应用于二滩水电站以上支流鱼河的降雨径流预报，通过建模、计算、比较和分析可知，其非线性映射能力、自学习能力和灵活性，均能较好地反映降雨径流之间的非线性的、复杂的转换关系，结合流域水文特性并合理处理建模数据，值得进一步深入研究。     

川中丘陵区一种新型小流域径流输沙模型的建立与应用

径流输沙模型对定量评价水沙的输出响应具有重要的意义。本研究在已有研究成果的基础上，通过对四川盐亭县林山西沟小流域的径流、泥沙进行现场观测与分析，提出含沙量单位线的定义及其确定方法，建立了适应该小流域的径流输沙模型。并应用实测资料进行比较，表明模型的模拟结果可靠，模拟过程确定性系数达0．8以上，为川中丘陵区小流域径流输沙过程的预测预报提供了一个新方法。     

Chromaticity contour map of the RGB cube: A simple algorithm

A simple algorithm (amenable to spreadsheets) is described for plotting a luminance contour map of the color gamut of an additive‐primary display given the chromaticities of its primaries and screen white. Each contour of the plot represents (in either r,g or x,y coordinates) the polygon of intersection of the RGB cube with a plane of constant Y. Each vertex on a contour is an intersection of 1 of the 12 edges of the RGB cube with the constant‐Y plane. Feasibility of an edge as a vertex of the polygon is tested through comparison of the computed r,g coordinates with functions of the luminosity coefficients of the primaries. By ordering the RGB‐cube edges in a particular way prior to scanning them for feasibility, one is guaranteed to retrieve the vertices of any constant‐Y polygon in convex order. This fact facilitates plotting of the polygons.     

瀑布沟工程的水文分析计算

本文简要的介绍了瀑布沟工程水文分析计算主要依据站的选定和基本资料的插补延长,以及径流、洪水的分析计算方法.在可行性研究阶段水文成果(通过审查)和新设立的毛头码水文站所取得的数年水文资料的基础上,将初设阶段对可行性研究阶段的水文分析计算方法和成果进行验证和补充的情况重点予以介绍.     

黑河干流中游地区耗水量变化的历史分析

黑河流域水资源极其匮乏，加之地区上的配置不均衡和中游地区水土资源的过度开发，导致黑河下游出现了严重的生态环境问题，已影响到我国北方广大地区生态环境质量，受到国家的高度重视和全社会的广泛关注。黑河水资源开发利用主要集中在中游地区，该区是全国重要的商品粮、蔬菜和经济作物生产基地之一，耗水量占流域耗水量的85％以上，是黑河的主要耗水区和径流利用区。利用黑河上游控制站莺落峡站和中游控制站正义峡站水文资料，分析了黑河中游耗水量的变化，结果表明：20世纪80年代以前黑河中游耗水量在4．4亿m^3左右，比较稳定；进入20世纪80年代以后，耗水量明显增加，80年代耗水量比70年代以前增加了1．97亿－2.49亿m^3;90年代耗水量又比80年代增加了1.64亿m^3左右；80年代以来流域耗水量呈明显增加的趋势，这是以人类活动影响为主的结果。     

Electrochemical behavior of metallic materials used in seawater—interactions between glucose oxidase and passive layers

Six materials (stainless steel, nickel-base alloy, titanium, chromium, nickel and admiralty brass) are tested in chemical and biochemical synthetic seawaters. The biochemical seawater contains enzymes catalyzing oxidation of glucose (glucose oxidase), simulating the action of natural biofilms. The evolutions of free corrosion potential (Ecor) versus time, and of cathodic and anodic reactions are compared with those obtained in natural seawater. Then, electrochemical behavior is related to semi-conducting properties of passive films. When glucose oxidase is present, increase of Ecor versus time is only reported for materials presenting a n-type semi-conductor passive film, and whose cathodic reaction current is increased. On the contrary, when passive layers are p-type semi-conductors, cathodic and anodic reactions are increased, and lead to a global Ecor constant with time of immersion. It appears that interaction between bacteria, medium and materials includes evolution of semi-conducting properties of passive layers.