Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

木质装饰材料干缩湿胀性对家具拼口的影响

随着装饰业、家具制造业的强劲发展,对于木质材料干缩湿胀性研究尤为重要,企业渴望得到解决木质材料干缩湿胀性的技术。本文在分析了大量文献的基础上,简述了国内外木质材料干缩湿胀性的研究成果,并提出了一些对家具制造具有实用价值的措施。     

长输管道建设物流管理新模式——物资配送

长输管道工程是以线路管道与沿途站场为主要内容的建设工程,其物资配送有着不同于一般物流管理的特点,点多线长,且交通不便.文章结合西南成品油管道建设工程的物资配送实践,总结出长输管道物资配送的类型,并从机构设置、计划编制、台账和报表管理等方面介绍了物资配送的管理内容及经验,实践证明,这种物资配送方法不但使业主的物资管理人员大为减少,而且使长输管道工程的物资供应更加及时有序.     

采用B/S架构设计与实现超市配送系统

系统采用B/S架构。整个系统由六大模块构成,分别是人员基本信息管理模块、商品信息管理模块、连锁店管理模块、商品入库管理模块、商品配送管理模块、退出系统模块。整个系统能够独立运行,使用方便,能够及时地分析企业进销存情况,提高工作效率,能给企业带来更大的利益。     

RFID芯片在物联网应用中的设计与研究

文章就政府主管部门在物联网应用环境下,在物品监管、证件关联和失控溯源等管控过程中的RFID芯片的信息安全问题进行了研究,特别是针对工作在915．0MHz频段的RFID芯片的安全机制,分析了在保证实时掌握监管物品本身的状态、随时检查与之对应的监管证件和文书状态、实时绑定监管物品的信息与物联网视频监控的管控要求下的信息安全机制,并提出了可资借鉴的信息安全解决方案。     

The importance of the compression test procedure for plastic drums for dangerous goods

Packagings for the transport of dangerous goods are tested by four tests:- free fall, leakproofness, hydraulic pressure and stacking. However, the test procedures can be interpreted in different ways, particularly the stacking test. Some test authorities apply a guided load to the top of the package and others, including the LNE in France, use non-guided loads. The objective of recent research carried out at LNE was to evaluate the risk (in terms of stack stability for dangerous goods packagings) if the stacking tests are performed with guided loads rather than non-guided loads. The stacking tests were carried out on a limited number of plastic drums (200 of four types) submitted for qualification testing using the above four tests, with either guided or non-guided loads. From the results we conclude that:

• i for the transport of dangerous goods of Danger Group I, the field of use is not altered when tested by either procedure.
• ii with goods of Danger Groups II and III, the use of either procedure does not alter the position as far as transport is concerned. However, there is a risk in warehousing: the non-guided procedure being preferred.

     

CO2/H2S对油气管材的腐蚀规律

本文综述了CO2、H2S对油气管材的腐蚀机理及影响因素,提出了开发经济型油管的设想.     

“八五”期间陶瓷窑用耐火材料的新进展

本文综合评述了“八五”期间我国陶瓷窑用耐火材料工业在合成低膨胀耐火材料，优质高档窑具品种，窑体及窑车隔热耐火等方面的研究与开发进展，以及各类优质耐火材料在建筑卫生陶瓷窑，日用陶瓷窑上的成功应用。     

Si_3N_4结合SiC窑具材料抗氧化涂层的研究

本文针对Si_3N_4结合SiC窑具材料在900—1100℃易氧化的特点,研制了该材料的抗氧化涂层,并用试验验证了涂层的抗氧化性能。结果表明:抗氧化涂层的抗氧化效果十分显著,具有很好的推广价值。     

Si3N4结合SiC窑具的研制及应用

本文根据试验确定了工艺路线,介绍了氯化烧成机理、原材料的选择及生产工艺对制品的影响,生产出的制品技术指标先进,性能优良。作为更新换代的新型窑具材料具有显著的经济效益和社会效益,有着广泛的使用价值。