Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

Metabolism of phospholipids in the yeast Schizosaccharomyces pombe

The fission yeast Schizosaccharomyces pombe is an important model organism for the study of fundamental questions in eukaryotic cell and molecular biology. A plethora of cellular processes are membrane associated and/or dependent on the proper functioning of cellular membranes. Phospholipids are not only the basic building blocks of cellular membranes; they also serve as precursors to numerous signaling molecules. In this review, we describe the biosynthetic pathways leading to major S. pombe phospholipids, how these pathways are regulated, and what is known about degradation and turnover of fission yeast phospholipids. This review also addresses the synthesis, regulation and the role of water-soluble phospholipid precursors. The last chapter of the review is devoted to the use of S. pombe for the biotechnological production of value-added lipid molecules.     

Metabolism of Storage Lipids and the Role of Lipid Droplets in the Yeast Schizosaccharomyces pombe

Storage lipids, triacylglycerols (TAG), and steryl esters (SE), are predominant constituents of lipid droplets (LD) in fungi. In several yeast species, metabolism of TAG and SE is linked to various cellular processes, including cell division, sporulation, apoptosis, response to stress, and lipotoxicity. In addition, TAG are an important source for the generation of value-added lipids for industrial and biomedical applications. The fission yeast Schizosaccharomyces pombe is a widely used unicellular eukaryotic model organism. It is a powerful tractable system used to study various aspects of eukaryotic cellular and molecular biology. However, the knowledge of S. pombe neutral lipids metabolism is quite limited. In this review, we summarize and discuss the current knowledge of the homeostasis of storage lipids and of the role of LD in the fission yeast S. pombe with the aim to stimulate research of lipid metabolism and its connection with other essential cellular processes. We also discuss the advantages and disadvantages of fission yeast in lipid biotechnology and recent achievements in the use of S. pombe in the biotechnological production of valuable lipid compounds.     

The amylose and lipid contents,dimensions, and gelatinisation characteristics of some wheat starches and their A- and B-granule fractions

Starches isolated from 23 bread wheats (Triticum aestivum) and 26 durum wheats (T. durum) contained 26.3-30.6% (mean 29.1%) total amylose, 19.3–25.1% (mean 22.9%) apparent amylose and 783–1144mg 100g^?1 (mean 977 mg 100g^?1) lysophos-pholipids. Gelatinisation temperatures were 57.3–64.9°C (mean 61.8°C) and enthalpies 6.4–11.8 Jg^?1 (mean 9.7Jg^?1) in excess water, measured by differential scanning calorimetry. There were no correlations between any of these parameters. Starch granule size distributions were determined with a Coulter Counter and 100–channel analyser. A-granule mean volumes were 1235–2585μm³ (av. 1778), modal volumes 863–1804μm³ (av. 1264), mean diameters 13.9–16.0μm (av. 13.99), and specific surface areas 0.236–0.302m²g^?1. B-granule mean volumes were 35.4–100.4μm³ (av. 55.9), modal volumes 16.5–54.5μm³ (av. 27.7), mean diameters 3.66–5.07μm (av. 4.09), and specific surface areas 0.684–0.920m²g^?1. The B-granule contents of the starches were 12.8–34.6% (av. 27.3) by weight (sedimentation method) and 13.0–37.3% (av. 24.0) by volume (Coulter method), the latter being the more accurate method.     

罐装降脂减肥果茶生产工艺的研究

本文介绍了以各种中药材为主要原料 ,配以茶叶为辅料 ,运用先进的处理方法制备降脂减肥果茶的生产工艺、质量标准 ,并对确定生产工艺的几个主要问题进行了探讨     

Comparison of six methylation methods for analysis of the fatty acid composition of albacore lipid

Six methods widely used to produce methyl esters for the gas chromatographic determination of the fatty acid composition of a marine lipid were compared. Four acid-catalyzed methods (1% H₂SO₄: CH₃OH; 5% HCl: CH₃OH; 7% and 14% BF₃: CH₃OH) and two base-catalyzed methods [0.5M NaOCH₃: CH₃OH; (1:4) tetramethylguanidine: CH₃OH] were used.
The use of BF₃: CH₃OH (7% and 14%) gave a lower content of 18:1 n9 than the other methods and produced an artefact (2.7–3.2% of total fatty acid content) eluting between the 20:5 and 24:1 fatty acid methyl esters. No significant differences were obtained between the other four methods.
Accordingly the use of BF₃: CH₃OH for transmethylation of marine lipids is not recommended. Results obtained in the other four methods showed that all are comparable.     

Nutritive quality of the alkaloid-poor Washington lupin (Lupinus polyphyllus lindl var SF/TA) as a potential protein crop

Abstract : An alkaloid-poor line of Washington lupin (Lupinus polyphyllus Lindl var SF/TA) was developed in an experiment started in 1982. The nutritive quality (alkaloid content, protein and amino acids, fat and fatty acids. macro- and micronutrients, fibre, sugars) yields, and seed quality of this line were studied. The results show that the total alkaloid content was low and varied in different seeds from 226 μg g^?1 to 366 μg g^?1 of dry matter. The main alkaloid was lupanine, but 16 other alkaloids (including sparteine and gramine) were also present. The var SF/TA cannot yet be used for human nutrition without processing although it would be a valuable protein crop. The results confirm that seeds which look different also vary in chemical composition.     

The Importance of Free Fatty Chain Length on the Lipid Organization in the Long Periodicity Phase

The skin’s barrier ability is an essential function for terrestrial survival, which is controlled by intercellular lipids within the stratum corneum (SC) layer. In this barrier, free fatty acids (FFAs) are an important lipid class. As seen in inflammatory skin diseases, when the lipid chain length is reduced, a reduction in the barrier’s performance is observed. In this study, we have investigated the contributing effects of various FFA chain lengths on the lamellar phase, lateral packing. The repeat distance of the lamellar phase increased with FFA chain length (C20–C28), while shorter FFAs (C16 to C18) had the opposite behaviour. While the lateral packing was affected, the orthorhombic to hexagonal to fluid phase transitions were not affected by the FFA chain length. Porcine SC lipid composition mimicking model was then used to investigate the proportional effect of shorter FFA C16, up to 50% content of the total FFA mixture. At this level, no difference in the overall lamellar phases and lateral packing was observed, while a significant increase in the water permeability was detected. Our results demonstrate a FFA C16 threshold that must be exceeded before the structure and barrier function of the long periodicity phase (LPP) is affected. These results are important to understand the lipid behaviour in this unique LPP structure as well as for the understanding, treatment, and development of inflammatory skin conditions.     

Proton nuclear magnetic resonance rapid and structure-specific determination ofω-3 polyunsaturated fatty acids in fish lipids

Based on proton nuclear magnetic resonance (¹H-NMR) spectroscopy, a rapid and structure-specific method for the determination of ω-3 polyunsaturated fatty acids (PUFAs) in fish lipids is presented. The different chemical shift observed for the methyl resonance of ω-3 PUFAs (δ=0.95 ppm) with respect to the methyl resonance of all other fatty acids (δ=0.86 ppm) has provided the possibility of proposing a new and rapid method for the determination of ω-3 PUFA content. Twenty-four fish lipid samples (raw, cooked and canned albacore tuna) produced results that showed good agreement between¹H-NMR analysis and gas chromatographic determination. Raw and cooked samples showed significantly higher levels of ω-3 PUFA than canned tuna.     

Cuticular lipids of the booklouse,Liposcelis bostrychophila: hydrocarbons,aldehydes, fatty acids,and fatty acid amides

The booklouse, Liposcelis bostrychophila, is an increasingly common pest of stored food products worldwide. We report here the cuticular lipid composition of this pest (the first report of the hydrocarbons of any member of the Order Psocoptera and the first report of fatty acid amides as cuticular components for any insect). No unsaturated hydrocarbons were present. A homologous series of n-alkanes (C₂₁–C₃₄), monomethyl alkanes (3-, 4-, 5-, 7-, 9-, 11-, 12-, 13- and 15-methyl-) with a carbon chain range of C₂₈–C₄₂, and dimethyl alkanes (3, 7-; 9, 13-; 11, 15-; 13, 17-; 9, 21-; 11, 19-; and 13, 21-); with a carbon number range of C₃₁–C₄₃ were identified. The relative abundances of these hydrocarbons were low, comprising approximately 0.0125% of total biomass. The amides were a homologous series (C₁₆–C₂₂ in chain length), with the major amide being stearoyl amide. In addition to the amides, free fatty acids (C_16:1, C_16:0, C_18:2, C_18:1, and C_18:0 in chain length) and three straight chain aldehydes (C₁₅, C₁₆, and C_17:1 in chain length) also occurred as cuticular components. These findings are discussed in terms of the chemical and physiological ecology of this species.