Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

Discovery of New Antiproliferative Imidazopyrazole Acylhydrazones Able To Interact with Microtubule Systems

Even though immunotherapy has radically changed the search for anticancer therapies, there are still many different pathways that are open to intervention with traditional small molecules. To expand our investigation in the anticancer field, we report here a new series of compounds in which our previous pyrazole and imidazopyrazole scaffolds are linked to a differently decorated phenyl ring through an acylhydrazone linker. Preliminary tests on the library were performed at the National Cancer Institute (USA) against the full NCI 60 cell panel. The best compounds among the imidazopyrazole series were then tested by immunofluorescence staining for their inhibition of cell proliferation, apoptosis induction, and their effect on the cell cycle and on microtubules. Two compounds, in particular 4-benzyloxy-3-methoxybenzyliden imidazopyrazole-7-carbohydrazide showed good growth inhibition, with IC₅₀ values in the low-micromolar range, and induced apoptosis. Both compounds altered the cell-cycle phases with the appearance of polyploid cells. Immunofluorescence analysis evidenced microtubules alterations; tubulin polymerization assays and docking studies suggested the tubulin system to be the possible, although not exclusive, target of the new acylhydrazone series reported here.     

Effect of the doping time of the 1‐butyl‐3‐methylimidazolium ionic liquid cation on the Nafion membrane proprieties

Nafion membranes were prepared by incorporating in the polymer matrix the 1‐butyl‐3‐methylimidazolium (BMI⁺) ionic liquid cation at different doping levels. Increasing the doping time of the membranes with the ionic liquid results in increased incorporation of the BMI⁺ cation but a decrease in the bulk conductivity. The thermogravimetric analysis shows that the BMI⁺ cation incorporation increases the thermal stability of the membranes. The higher discharge efficiency of the fuel cell at 80°C was obtained by using Nafion membrane after 15 minutes of doping in the ionic liquid solution.     

N-methyl-2-hydroxyethylammonium oleate ionic liquid performance as corrosion inhibitor for mild steel in hydrochloric acid medium

The aim of the present study is to evaluate the performance of N-methyl-2-hydroxyethylammonium oleate ([m-2HEA][Ol]) as a corrosion inhibitor for mild steel in a 0.1-mol/L hydrochloric acid solution and also investigate the role of chloride in the inhibition mechanism. This protic ionic liquid (PIL) has formerly shown a high efficiency as a corrosion inhibitor in a neutral chloride medium. Electrochemical and weight loss measurements, surface contact angle determination, scanning electron microscopy, and Raman spectroscopy were used to understand the factors that influence the response of the studied inhibitor. Results revealed that [m-2HEA][Ol] behaves as a mixed-type adsorption inhibitor, by blocking cathodic sites and by modifying the activation energy of the anodic reaction, and it can reach up to 94–97% of inhibition efficiency. PIL adsorption was enhanced by the excess of positive charge of the mild steel. The effect of inhibitor molecule has been discussed to propose a mechanism that explains the inhibitory action of the corrosion inhibitor, pointing out the role of chloride in the inhibition mechanism.     

Carbon supported nickel phosphide as efficient electrocatalyst for hydrogen and oxygen evolution reactions

Hydrogen production through water splitting is an efficient and green technology for fulfilling future energy demands. Carbon nanotubes (CNT) supported Ni₂P has been synthesized through a simpler hydrothermal method. Ni₂P/CNT has been employed as efficient electrocatalysts for hydrogen and oxygen evolution reactions in acidic and alkaline media respectively. The electrocatalyst has exhibited low overpotential of 137 and 360 mV for hydrogen and oxygen evolution reactions respectively at 10 mA cm^?2. Lower Tafel slopes, improved electrochemical active surface area, enhanced stability have also been observed. Advantages of carbon support in terms of activity and stability have been described by comparing with unsupported electrocatalyst.     

Synthesis and analysis of phase segregation of polystyrene-block-poly(methyl methacrylate) copolymer obtained by Steglich esterification from semitelechelic blocks of polystyrene and poly(methyl methacrylate)

Here, an alternative route to successfully synthesize polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) is reported. Steglich esterification was used as an effective, metal free approach for coupling carboxylic terminated PS and the hydroxyl end-functionalized PMMA chains obtained by nitroxide-mediated polymerization and atom transfer radical polymerization, respectively. α-Functionalization was obtained using 4,4′-azobis(4-cyanovaleric acid) and 2,2,2-tribromoethanol as initiators. The synthesis of PS-b-PMMA was confirmed by gel permeation chromatography and nuclear magnetic resonance (NMR), while the dependence of the diffusion coefficients of the polymers (PS, PMMA, PS/PMMA blend, and PS-b-PMMA) with their corresponding molecular weights was discussed based on the results of atomic force microscopy-based infrared spectroscopy, differential scanning calorimetry, and spectra of diffusion-ordered NMR spectroscopy. Differently from PS-b-PMMA, a partial segregation was observed for the PS/PMMA blend, affecting its thermal behavior and diffusion coefficient. The study here presented provides an easier and efficient strategy for the synthesis of PS-b-PMMA and new insights into the diffusion of polymers.     

Rapid and direct estimation of active biomass on granular activated carbon through adenosine tri-phosphate (ATP) determination

Granular activated carbon (GAC) filtration is used during drinking water treatment for the removal of micropollutants such as taste and odour compounds, halogenated hydrocarbons, pesticides and pharmaceuticals. In addition, the active microbial biomass established on GAC is responsible for the removal of biodegradable dissolved organic carbon compounds present in water or formed during oxidation (e.g., ozonation and chlorination) processes. In order to conduct correct kinetic evaluations of DOC removal during drinking water treatment, and to assess the state and performance of full-scale GAC filter installations, an accurate and sensitive method for active biomass determination on GAC is required. We have developed a straight-forward method based on direct measurement of the total adenosine tri-phosphate (ATP) content of a GAC sample and other support media. In this method, we have combined flow-cytometric absolute cell counting and ATP analysis to derive case-specific ATP/cell conversion values. In this study, we present the detailed standardisation of the ATP method. An uncertainty assessment has shown that heterogeneous colonisation of the GAC particles makes the largest contribution to the combined standard uncertainty of the method. The method was applied for the investigation of biofilm formation during the start-up period of a GAC pilot-scale plant treating Lake Zurich water. A rapid increase in the biomass of up to 1.1 x 10(10)cells/g GAC dry weight (DW) within the first 33 days was observed, followed by a slight decrease to an average steady-state concentration of 7.9 x 10(9)cells/g GAC DW. It was shown that the method can be used to determine the biomass attached to the GAC for both stable and developing biofilms.     

Quality assessment of bed sediments of the Po River (Italy)

Comprehensive and contemporary evaluations of physical, chemical and toxicological endpoints have been performed on bed sediments of the Po River, the major Italian watercourse. Two extensive sampling campaigns were conducted in summer and winter low-flow conditions. Composite sediment samples were collected from ten reaches of the main river: the first was located in the upper region (ambient control), and the others downstream of the confluences of nine principal tributaries. The two sampling programs were paralleled by contemporary investigations on the macroinvertebrate community. The particle-size composition along the Po River showed a relatively uniform distribution of fine sand, a progressive downstream decrease of coarse sands and a corresponding increase of fine materials. The levels of polychlorinated biphenyls (PCB), polycyclic aromatic hydrocarbons (PAH), extractable organo halides (EOX), Cd, Cr, Cu, Hg, Ni, Pb and Zn were determined in sediment fine particles (< 63 microm), and showed marked changes across the ten river reaches. Their longitudinal trends, as those of organic carbon and total nitrogen, were very similar and largely independent of the survey season. Sediment quality benchmarks were used to evaluate sediment chemistry, and, although the overall level of contamination was from moderate to low, the reaches located downstream of the tributaries Dora Riparia, Dora Baltea, Lambro and Oglio were considered to be at risk. Sediments were tested for toxicity on Oncorhynchus mykiss, Ceriodaphnia dubia, Raphidocelis subcapitata and Vibrio fischeri. The toxicity tests were conducted both with sediment extracts and whole samples. Sediment extracts showed toxic potentials that were consistent with the spatial distribution of contaminants. Whole-sediment toxicity showed moderate/low effects which also included false positives and negatives. Alterations of the macroinvertebrate community were found for many kilometers downstream of Dora Riparia, and with a seasonal dependence, also in other reaches of the Italian river. Principal component analysis (PCA) was used to describe the longitudinal and temporal changes of the Po River, and allowed the selection of the most useful and discriminating indicators.     

Synthesis and Biological Evaluation of Papain‐Family Cathepsin L‐Like Cysteine Protease Inhibitors Containing a 1,4‐Benzodiazepine Scaffold as Antiprotozoal Agents

Novel papain‐family cathepsin L‐like cysteine protease inhibitors endowed with antitrypanosomal and antimalarial activity were developed, through an optimization study of previously developed inhibitors. In the present work, we studied the structure–activity relationships of these derivatives, with the aim to develop new analogues with a simplified and more synthetically accessible structure and with improved antiparasitic activity. The structure of the model compounds was significantly simplified by modifying or even eliminating the side chain appended at the C3 atom of the benzodiazepine scaffold. In addition, a simple methylene spacer of appropriate length was inserted between the benzodiazepine ring and the 3‐bromoisoxazoline moiety. Several rhodesain and falcipain‐2 inhibitors displaying single‐digit micromolar or sub‐micromolar antiparasitic activity against one or both parasites were identified, with activities that were one order of magnitude more potent than the model compounds.