Webmenthods的设计与实现

为了更好地应用WebMethods,该文提供了一个基于B2B项目的环境,用于对WebMethods的设计,实现,从而大大提高WebMethods的管理和操作以及易用性和可维护性。     

基于OPNET的移动IPv6路由优化研究

为了观察路由优化对移动IPv6网络性能产生的影响,采用OPNET Modeler网络仿真软件创建较为复杂的网络环境,通过切换延时、业务流量、端到端延时等典型的移动IPv6网络性能参数影响实验.仿真结果表明,路由优化对减小网络端到端延时方面是有效的,同时路由优化可能会导致增加切换延时,造成业务流丢失.路由优化策略应考虑采取措施减小切换时延.     

Heterogeneous Reactor Modeling of an Industrial Multitubular Packed‐Bed Ethylene Oxide Reactor

The one‐dimensional heterogeneous model of an industrial multitubular packed‐bed ethylene oxide (EO) reactor was developed using the equation‐oriented platform Aspen Custom Modeler. Reactor operation was optimized in terms of maximized EO production and selectivity and enhanced safety related to the presence of oxygen in the EO reactor. Good agreement was found between the model results during validation against the available information under identical operating conditions. The model predicts the behavior of the EO reaction and demonstrates the extent of catalyst utilization with product distribution, product yield, by‐product formation, temperature and concentration profiles, over time and along the length of the reactor or catalyst bed. The model sensitivity studies compute the optimum feed flow, oxygen concentration, feed pressure, etc. and suggest the best operational philosophy.     

How do practitioners use conceptual modeling in practice?

Much research has been devoted over the years to investigating and advancing the techniques and tools used by analysts when they model. As opposed to what academics, software providers and their resellers promote as should be happening, the aim of this research was to determine whether practitioners still embraced conceptual modeling seriously. In addition, what are the most popular techniques and tools used for conceptual modeling? What are the major purposes for which conceptual modeling is used? The study found that the top six most frequently used modeling techniques and methods were ER diagramming, data flow diagramming, systems flowcharting, workflow modeling, UML, and structured charts. Modeling technique use was found to decrease significantly from smaller to medium-sized organizations, but then to increase significantly in larger organizations (proxying for large, complex projects). Technique use was also found to significantly follow an inverted U-shaped curve, contrary to some prior explanations. Additionally, an important contribution of this study was the identification of the factors that uniquely influence the decision of analysts to continue to use modeling, viz., communication (using diagrams) to/from stakeholders, internal knowledge (lack of) of techniques, user expectations management, understanding models’ integration into the business, and tool/software deficiencies. The highest ranked purposes for which modeling was undertaken were database design and management, business process documentation, business process improvement, and software development.     

IPv6下的DiffServ机制的研究与仿真

服务质量(QoS)对于Internet用户来说,是至关重要的I。Pv4网络的缺点之一就是缺少对QoS的支持,对所有通信应用都以尽力而为(Best Effort)的方式提供服务。对于一些实时性较强的应用(如视频会议等),无法对其特殊性给予保障。IPv6协议在吸取了IPv4教训的基础上,不仅解决了32位地址的局限,而且增加了OoS支持,端到端的安全机制,跳数限制等。本文主要针对IPv6下QoS中DiffServ机制的原理、架构及实施过程进行了研究,并且使用网络仿真软件OPNETModeler构建了DiffServ环境,进行了仿真试验。分别使用不同的排队机制进行试验,然后针对仿真结果进一步分析。     

3层式广域保护系统通信网络

分析了3层式广域保护系统需要传输的消息种类以及各类消息对通信系统的要求，在此基础上选择了IP over ATM over SDH作为网络类型，以充分利用同步数字体系（SDH）光纤自愈环的低时延和可靠性以及异步传送模式（ATM）的服务质量（QoS）和IP的多业务支持;设计了多环网络拓扑并探讨了关键消息传输的通信协议;使用OPNET Modeler对关键信息传输进行了仿真，证实了此通信系统的有效性，仿真结果表明该通信系统可以满足最恶劣情况下的实时性和可靠性要求。     

地铁站移动通信实现无缝垂直切换的方法

下一代网络的发展是为用户提供无处不在的移动通信网络,使用户对其定制业务的体验始终如一,这就需要为用户提供不同网络之间尽可能小的切换时延。文中采用OPNET Modeler仿真软件,对紧耦合结构下通用移动通信系统（UMTS）到无线局域网（WLAN）的切换协议进行仿真。以地铁站为场景,设计考虑通用移动通信系统（UMTS）与无线局域网（WLAN）间的切换,对比紧耦合结构与松耦合结构下的切换时延,说明网络结构的耦合度越高,切换的时延就越小。     

基于过程总线的母线保护通信体系结构

合理地设计变电站过程层网络的拓扑结构,最大程度地实现信息共享,并保证各种保护、控制系统的可靠性,是数字化变电站发展所面临的一个重要问题。介绍了过程总线的相关技术,分析了采样值（SAV）报文和面向通用对象的变电站事件（GOOSE）报文发布者/订阅者通信模式的2种具体实现方式,提出了3种基于不同过程总线的母线保护通信体系结构,并利用OPNET Modeler软件进行了仿真分析。仿真结果表明了所提出的通信结构的可行性,通过比较分析得出了各种通信结构的适用范围,对过程层通信网络的设计具有一定的参考价值。     

基于OPNET的无线校园Mesh网络仿真设计

无线Mesh网络是针对Internet无线接入和应用发展起来的,它的典型应用主要表现在城市特定区域、复杂街区、建筑物群内、办公区、家庭内等.主要是针对学校应用而设计的一个无线网络模型,并在OPNET仿真环境下,对所设计的无线校园网进行仿真,通过仿真结果进行对比来分析网络性能.     

基于OPNET Modeler的以太网性能的仿真研究

以太网的应用越来越普遍,影响以太网工业应用的最大瓶颈是网络实时性,在理论分析的基础上,用OPNET网络仿真软件对以太网的性能进行了仿真研究.