Magnetic Nanoparticle Arrays Self-Assembled on Perpendicular Magnetic Recording Media

We study magnetic-field directed self-assembly of magnetic nanoparticles onto templates recorded on perpendicular magnetic recording media, and quantify feature width and height as a function of assembly time. Feature widths are determined from Scanning Electron Microscope (SEM) images, while heights are obtained with Atomic Force Microscopy (AFM). For short assembly times, widths were ~150 nm, while heights were ~14 nm, a single nanoparticle on average with a 10:1 aspect ratio. For long assembly times, widths approach 550 nm, while the average height grows to 3 nanoparticles, ~35 nm; a 16:1 aspect ratio. We perform magnetometry on these self-assembled structures and observe the slope of the magnetic moment vs. field curve increases with time. This increase suggests magnetic nanoparticle interactions evolve from nanoparticle–nanoparticle interactions to cluster–cluster interactions as opposed to feature–feature interactions. We suggest the aspect ratio increase occurs because the magnetic field gradients are strongest near the transitions between recorded regions in perpendicular media. If these gradients can be optimized for assembly, strong potential exists for using perpendicular recording templates to assemble complex heterogeneous materials.     

利用垂直阵列构作Cartesian认证码

利用垂直阵列构作了一类Cartesian认证码,计算了它们的参数,并且在编码规则按等概率分布选取时,成功的模仿攻击和成功的替换攻击概率也被算出。     

Micromagnetic simulation of FeCo write head in perpendicular recording hard disk drives

The single-pole tip (SPT) heads made of the high saturation FeCo ferromagnetic metals are crucial for the actualization of ultrahigh density perpendicular recording. The effective head field distribution in the medium is of key importance for the design of the SPT head, which would be analyzed by micromagnetic simulations in this work. Two 3D micromagnetic models of the SPT head were established to select a more appropriate method of modeling, with a magnetostatic image effect or a real soft magnetic material to model the image of the SPT head in soft under layer (SUL). The results from these two designs were tested and compared to the ideal head field calculated by the Jacobi finite element method (FEM); and the design with the real soft magnetic material as image was proved suitable for simulating the ultrahigh density perpendicular recording write head.     

利用天然地震震源点确定活动断裂深部延伸性状的尝试

本文首先运用卫星影像,对临汾—运城盆地中主要活动断层的平面展布状况进行了解译。在此基础上,利用天然地震震源点的三维生标,探索性地研究与确定了各条断层的深部延伸性状,建立起了盆地内断裂构造的三维格架。主要结论有:(1)边缘断裂多数是深达莫霍面的(38km)伸展性铲形断裂;(2)霍山西麓山前大断裂的深部延伸为直立状,深度达莫霍面(38km)。(3)盆地内的其它断层多数是铲形断层的对偶断层,产状为倾斜状,与铲形断层相遇后而终止,延伸深度一般不超过30km;(4)区内存在4个水平滑脱面(或层),其深度分别为4.5～5.5km,9.5～10.5km,18.5～20.5km,35.5～37.5km,这些面(或层上)震源点分布较密集;(5)区内北部、中部、南部,断层组合形式稍有差别,并控制、形成了不同的地貌形态。     

NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

制备锆乳浊陶瓷釉的正交试验研究

以锆英石为乳浊剂,对影响乳浊釉制备的石英、钾长石、锆英石、苏州土用量4因素进行了正交试验研究,获得了性能良好的乳浊釉配方,通过SEM分析,研究了乳浊釉主要的乳浊相。     

Dependence of domain wall structures on repetition n in[Pt（0.5 nm）/Co（0.4 nm）]n/NiO（1.1 nm）/[Co（0.4 nm）/Pt（0.5 nm）]n multilayers

The magnetic force microscopy and a sample vibrating magnetometer have been used to investigate the domain structure in two antiferromagnetically coupled Co/Pt multilayers.In the antiferromagnetic coupled[Pt(0.5 nm)/Co(0.4 nm)]_n/NiO(1.1 nm)/[Co(0.4 nm)/Pt(0.5 nm)]_n multilayers with perpendicular anisotropy,the antiferromagnetic interlayer coupling strength increases linearly with the repetition number n in Co/Pt multilayers.In demagnetized states,relatively shifted domain walls in the two Co/Pt multila...     

利用正交实验方法探讨微晶玻璃的耐腐蚀性

采用正交实验方法对CaO-Al2O3-SiO2系微晶玻璃的热处理工艺进行探讨,通过分析各热处理工艺参数对微晶玻璃烧结耐酸性和耐碱性的影响,找出其最佳热处理工艺参数,并采用XRD和SEM对热处理后的微晶玻璃的物相和形貌进行分析.结果表明：热处理工艺参数对微晶玻璃的耐腐蚀性能影响明显.     

基于MC9S08GB60的汽车电控悬架控制系统设计

对空气悬架的控制是提高车辆行驶平顺性的有效方法。以MC9S08GB60为控制芯片,以YBL6891H型客车的1/4车辆模型为研究对象,设计了一种客车用空气悬架的电子控制单元。该控制单元通过调整空气弹簧的刚度,降低车身垂直加速度,并采用模糊PID控制算法,提高控制精度。试验表明:该电子控制单元能有效降低车身垂直加速度,在改善车辆行驶平顺性的同时,提高了操纵稳定性。     

高效自动化码头低架桥结构垂直挠度分析

为验证某高效自动化码头低架桥结构设计的合理性,利用ANSYS建立有限元模型,对其进行静力特性计算．比较用挠度数学模型计算出的理论值与用ANSYS计算的结果,表明该模型建立正确．研究表明垂直挠度比结构强度更难以满足实际工况的应用要求．