Integrated circuit and system design for renewable energy inverters

This study proposes that a novel integrated circuit (IC) and system design for renewable energy inverters can harvest renewable energy to power direct current (DC) and alternating current (AC) loads. In addition, an intelligent synthesis and management tool is developed to design the proposed system and to judge the system’s operational maintenance decisions. Finally, a renewable energy inverter’s information is posted to an online system. Users can obtain the proposed system’s information at any time and place. The accurate and superior performance of the proposed IC and system is confirmed by computer simulations and experimental results.     

Application of differential evolution for cascaded multilevel VSI with harmonics elimination PWM switching

Harmonic elimination pulse width modulation (HEPWM) method has been widely applied to multilevel voltage source inverter (MVSI) to remove low frequency harmonics from its output voltage. However, the computation of the HEPWM switching angles for MVSI is very challenging due to several constraints, namely angle sequencing, very tight angular spacing and the numerous possibilities of angles distribution ratio. Realizing the potential of Differential Evolution (DE) to handle complex problems, this work proposes its application to solve the HEPWM problem for cascaded MVSI. Its emphasis is on improving the availability of HEPWM for higher output voltage by extending the maximum range of modulation index (M). It also removes the discontinuities in the switching angles and reduces the number of distribution ratio required to obtain the required solution. Compared to the most advanced (similar) work, i.e., 7-level MVSI with seventeen switching angles, DE covers a wider range of M; the maximum achievable M is 2.80. Furthermore, it exhibits very low second order distortion factor (DF₂): for the worst case, the value of DF₂ is 0.0014%. To verify the viability of the proposed algorithm, simulation is carried out and hardware prototype is constructed. Both results show very good agreement with the theoretical prediction.     

一种单相串联混合电力有源滤波器的研究

文中对串联混合电力滤波器抑制谐波的原理进行了分析。为了检测单项系统的谐波电流,提出一种基于虚拟三相法和瞬时无功理论的谐波检测方法,并且对串联滤波逆变器的直流侧电压的控制进行了讨论。仿真结果证明了其有效性。     

通信交流供电方案初探

在通信供电系统中,与直流供电系统相比,从设计、设备技术,到运行维护管理,交流供电系统都有所滞后。借鉴直流供电系统经验,通过应用N X并联逆变器模块热插拔技术,实行分散式供电,进而改变传统的以UPS为核心的集中供电模式,则可在很大程度上解决一直困扰着我们的交流供电系统成本高和可靠性低的难题。     

混合动力电动汽车用电机及驱动控制器的电磁兼容设计

电机及驱动控制器作为电动汽车的关键部件,其电磁兼容设计对于保证电动汽车的可靠运行非常重要.介绍了国家十五项目中某混合动力轿车用电机及控制器系统的电磁兼容措施,分别从控制电路、信号电缆、功率电路及屏蔽机箱等工程角度进行了分析和设计.该系统的电磁兼容性符合GB/T17619-1998的要求,且已应用于实际混合动力电动汽车,运行情况良好.     

户式中央空调的节能研究

对户式中央空调系统节能问题作了研究,从住宅建筑空调负荷的计算特点和方法、系统主机容量的确定、末端设备的选择到系统调节特性等诸多方面,综合考虑,并结合实际工程,阐述了影响户式中央空调能量消耗的各种主要因素和改进措施.     

PLC的大型牵伸卷绕机的应用研究

本文介绍了大型牵伸卷绕机的计算机控制系统，以西门子MMV型变频器为驱动装置，西门子PLC300为控制核心，根据西门子USS协议和MPI协议，实现PLC与变频器、TP27触摸显示屏的通信，取得了较高的控制精度和稳定性，充分满足生产过程的需要，具有广阔的应用前景。     

可并联逆变器中的同步控制技术及其实现

论述了可并联逆变器中的同步控制技术及其实现方法。在分析了同步的重要性之后，提出了抢占与并发相结合的同步控制策略及其实现方法，实践证明该方法具有很高的控制精度。     

磁盘阵列校验信息的放置策略

廉价磁盘冗余阵列（ＲＡＩＤ）采用许多小的廉价磁盘来代替大容量昂贵的磁盘，以取得更高的性能和更低的功耗。本文介绍了ＲＡＩＤ－５级磁盘阵列中校验信息的八种不同的分布策略，即奇偶校验信息的放置策略，并从几个不同的应用情况对不同的放置策略进行了研究，结论是不同的奇偶校验信息放置策略对磁盘阵列的Ｉ／Ｏ读写性能有很大的影响。     

大系统分散鲁棒容错控制的进展及主要成果

综述了近２０年来关联大系统分散鲁棒容错控制的研究动态及取得的主要成果。说明了统一地研究分散鲁棒容错控制的必要性。在分散控制、鲁棒控制和容错控制研究领域内，分析了各种设计方法的主导思想及实质；指出了这些研究成果的意义与存在的问题。文中着重论述了分散、鲁棒、容错控制研究方法的发展途径。