An Approach to a Higher‐Power‐Density Power Supply for a 380‐V DC Distribution System

A methodology for realizing a higher‐power‐density DC‐DC converter has been proposed for a power unit installed in a 380‐V DC distribution system. The possibility of the converter design will be strengthened by using the series–parallel connection topology for isolated DC‐DC converters. A converter prototype with a power density of 10 W/cm³ has been fabricated, and the feasibility of the converter design has been confirmed experimentally. This result contributes to the realization of a highly efficient and highly space‐saving 380‐V DC distribution system. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 51–62, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22494     

Star-shaped poly(lactic acid) with carboxylic acid terminal groups via poly-condensation

A series of star-shaped poly(lactic acid)s with carboxylic acid terminal groups have been synthesized by direct poly-condensation of lactic acid in the presence of a poly-carboxylic acid core molecule with triphenylphosphonium trifluoromethanesulfonate (TPP-T) catalyst.These star-polymers had thermal properties not very much different from those of star-shaped poly(lactic acid) with hydroxyl terminal groups and linear poly(lactic acid), irrespective of the structure of the core molecule and number of polymer arms. Solubility and degradability of these star-polymers were, however, greatly enhanced compared to those of star-polymers with hydroxyl terminal groups and increased depending on the number of polymer arms. From the star-shaped polymers, a variety of ammonium salts and the corresponding carboxyamides were successfully prepared.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

EFFECT OF STEPWISE CHANGE OF DRYING RATE ON MICROSTRUCTURE EVOLUTION IN POLYMER FILMS

The effect of the drying rate of the solvent on microstructure evolution in thin films of immiscible polystyrene/polycarbonate blends was investigated by applying a stepwise change in air velocity. The polymer blend was dissolved in tetrahydrofuran and cast on a glass substrate to form a thin liquid film. The drying rate of the solvent was measured by a gravimetric technique, and the phase-separated structure in the film was observed by optical microscopy. The results indicated that cellular structures of droplet arrays were formed in the phases evolved primarily during the early stage of drying, and the droplets then coalesced in the intermediate stage to form bigger droplets. The size of the first evolved phase decreased with increasing time at a high drying rate, whereas larger droplets were obtained with longer high drying rate regimes. These results suggested that the droplets were induced by secondary phase separation which was strongly affected by the drying rate of the solvent.     

Respiratory symptoms and pulmonary function in coal miners: looking into the effects of simple pneumoconiosis

Most soil quality guidelines do not distinguish among the various forms of metals in soils; insoluble, nonreactive, and nonbioavailable forms are deemed as hazardous as highly soluble, reactive, and toxic forms. The objective of this study was to better understand the long-term effects of copper on microorganisms in relation to its chemical speciation in the soil environment. Carbon mineralization processes and the global structure of different microbial communities (fungi, eubacteria, actinomycetes) are still affected after more than 50 years of copper contamination in 20 soils sampled from two different agricultural sites. The microbial respiration lag period (LP) preceding the beginning of mineralization process increases with the level of soil copper contamination and is not significantly affected by other environmental factors such as soil pH and soil organic matter (SOM) content. The total copper concentration showed the best correlation with the LP when each site is considered separately. However, when considering the whole set of data, soil solution free Cu2+ activity (pCu2+) is the best predictor of Cu toxicity determined by LP (quite likely because pCu2+ integrates the soil physicochemical variability). The maximum mineralization rate (MMR), even if well correlated with the pCu2+, appears not to be a good biomonitor of copper contamination in soils since it is highly sensitive to soil characteristics such as SOM content. This study emphasizes the importance of the physicochemical properties of the environment on soil heavy metal toxicity and on soil toxicological measurements. These properties must be characterized in soil toxicological studies with respect to (1) their interactions with heavy metals, and (2) their direct impact on the selected biological test. The measurement of pCu2+ to characterize the level of soil contamination and of lag period as a bioindicator of metal effects in the soil are recognized as useful tools for the evaluation of the biological quality of soils.     

Evaluation of the historical records of lead pollution in the annual growth rings and bark pockets of a 250-year-old Quercus crispula in Nikko,Japan

The annual growth rings and bark pockets of a 250-year-old Japanese oak (Quercus crispula), collected from the Nikko National Park, Japan in 2000 AD, were analysed by ICP mass spectrometry. The annual rings, sampled in 5-year increments, recorded Pb concentrations from 0.01 to 0.1 mg kg(-1) and there was no significant change in concentration with time. In contrast, bark pocket samples dating from 1875 to the present showed a progressive increase in Pb concentration with time, from approximately 0.1 to 10 mg kg(-1). Shoots of epiphytic moss growing on the tree trunk contained 17 mg kg(-1) Pb. The bark pockets recorded historical increases in airborne Pb pollution accompanying the industrialisation of Japan, which was initiated by the opening of Japan's borders from 1854. This increase was not reflected by the annual rings. The 206Pb/207Pb isotope ratio of the bark pockets decreased from approximately 1.18 to 1.16 from 1964 to the present, indicating changes in the sources of Pb pollution. The 206Pb/207Pb isotope ratio of the moss shoots was similar to the current bark (1.16). The data showed bark pockets to be more effective than annual rings for recording historical change in airborne lead pollution.     

A flow method with photocatalytic oxidation of dissolved organic matter using a solid-phase (TiO2) reactor followed by amperometric detection of consumed oxygen

A photocatalytic sensor for the determination of chemical oxygen demand (COD) using titanium dioxide, based on the use of a pair of oxygen electrodes and flow injection analysis, is described. The measuring principle is based on the direct determination of the oxygen concentration change resulting from photocataltic oxidation of organic compounds. One of the two oxygen electrodes, the reference oxygen electrode, was utilized to measure the reference signal responding only to oxygen present in the injected samples. Oxygen consumption due to the TiO2-catalyzed photochemical oxidation of organic compounds in samples was monitored with the working oxygen electrode. The COD value of this sensor was calculated as the difference of the currents at reference and working oxygen electrodes, respectively. The operation characteristics of the sensor are demonstrated using artificially treated wastewater as a substrate. The sensor was also applied to the determination of COD in real water samples from dam reservoirs (n = 20) all over Japan. The results were in good agreement with those from the conventional COD methods (i.e., permanganate and dichromate methods).     

Optimizing dock configuration and staffing in decentralized receiving

In manufacturing facilities, shipping and receiving traditionally have been concentrated in one or two areas of the building. The widespread introduction of just-in-time shipping policies in US manufacturing companies during the past 15 years, as well as the common use of decentralized receiving in the Japanese automobile industry, has motivated the consideration (and occasionally the adoption) of dock configurations to support decentralized receiving (also known as perimeter receiving). By providing multiple access points along the perimeter of the building, decentralized receiving generally reduces the time and cost associated with moving purchased parts to the locations within the facility where they are used, but also results in increased cost of construction, maintenance, and operation for docks and associated truck access/egress, as well as additional interior floorspace requirements. We develop an optimization-based procedure to determine which of several possible dock areas to construct, how many doors or gates each should have, how many unloading and internal material handling staff should be assigned to each group, and which inbound materials each group should handle. We consider the amortized cost of constructing and equipping the docks, the amortized cost of material handling equipment to support the unloaders and material handlers, the cost of operating the material handling equipment, and labor costs for both unloading and internal material handling.