车用复合材料板簧性能的有限元分析

为了初步验证所设计复合材料板簧的结构性能,利用有限元分析方法对复合材料板簧结构的静载力学和动态疲劳进行了研究。计算得到空载工况加载过程中的载荷—位移曲线,板簧刚度为373 N/mm。当两端施加载荷为64.7 kN时,板簧达到最大压缩应力。结合复合材料的S—N曲线对板簧寿命进行了估算,循环次数最低处位于板簧下表面靠近卷耳部分,循环次数为33万次。对比复合材料板簧的设计刚度和疲劳寿命,与有限元分析处理方法计算所得结果较为接近,该板簧结构基本符合使用要求。     

剂油比对煤焦油沥青质加氢过程的影响

以中低温煤焦油沥青质为原料,采用NiMoW/γ-Al_2O_3商业催化剂,在反应温度380℃、反应压力8 MPa和反应时间1.5 h条件下,分别在不同剂油质量比(1∶25、1∶20、1∶15、1∶10)条件下进行加氢实验,通过采用元素分析、FT-IR、XRD、~1H-NMR和XPS等分析表征手段,考察不同剂油质量比对中低温煤焦油沥青质加氢转化过程的影响。结果表明,随着剂油质量比的增加,沥青质转化率提高,加氢产物分布也发生大幅变化,沥青质和芳香分轻质化转化为饱和分。但随着剂油质量比的进一步提高,同时也发生了更多的裂化反应和缩合反应,剂油质量比在合适范围能够很好地起到加氢轻质化且抑制结焦的效果。     

Highly active sites of low spin FeⅡN4species:The identification and the ORR performance

Over recent years,catalytic materials of Fe-N-C species have been recognized being active for oxygen reduction reaction(ORR).However,the identification of active site remains challenging as it generally involves a pyrolysis process and mixed components being obtained.Herein Fe₃C/C and Fe₂N/C samples were synthesized by temperature programmed reduction of Fe precursors in 15%CH₄/H₂and pure NH₃,respectively.By acid leaching of Fe₂N/C sample,only single sites of FeN₄species were presented,providing an ideal model for identification of catalytic functions of the single sites of FeN₄in ORR.A correlation was conducted between the concentration of Fe^ⅡN₄in low spin state by Mossbauer spectra and the kinetic current density at 0.8 V in alkaline media,and such a structure-performance correlation assures the catalytic roles of low spin Fe^ⅡN₄ species as highly active sites for the ORR.     

基于FLUENT的多物理场耦合研究

基于FLUENT的多物理场耦合分析是当前核安全分析的热点问题。本文运用6组缓发中子的点堆动力学模型（PKM）编写了反应堆核功率计算程序，利用外部调用耦合和用户自定义函数（UDF）动态链接库耦合方法分别建立了FLUENT-REALP5耦合分析模型和FLUENT-PKM耦合分析模型，并在单相范围内利用水平分支管道的喷放问题和线性反应性引入的超功率瞬变问题验证了耦合模型的正确性和有效性。本研究的耦合分析方法可以为FLUENT的多物理场核安全分析提供支撑。      

搅拌式风力致热装置启动性能研究

搭建搅拌式风力致热试验台,以自制的2种致热器为研究对象,使其分别在3个不同平均角加速度24.92、14.66、8.04 rad/s2下启动。通过动态扭矩测试仪和数据采集仪测试记录致热器启动阶段的相关数据。结果表明:致热器启动时所需扭矩与角加速度的一次方、转速、叶片半径的二次方成正比,同时得出这些因素之间的关系式;满负荷时,启动扭矩会出现一个峰值,且角加速度越大峰值越大,自然风必须提供峰值以上的扭矩,否则装置无法启动。     

三维姿态监测技术在地震测井中的应用

在地震测井施工中,为监测地下检波器的运动特征,需应用三维监测技术。首先从映射几何的角度深入分析OpenGL的三维监测技术,建立OpenGL虚拟场景,然后分析检波器模型内外方位元素的表达,利用三维绘图技术建立检波器的立体模型,最后对所获取的坐标数据进行快速的三维绘图技术处理,形成实时可靠的立体模拟界面。实验结果表明:检波器的方位角模拟精确度能保证在1°以内,满足后期简化数据处理的要求。该技术应用在地震测井中时,具有远程、可靠、无损检测等特点,为操作人员提供直观可靠的观测决策平台,并且结合实际需求能够扩展多种功能模块,可广泛应用于测井过程中方位数据的获取。     

Core–shell NTC materials with low thermal constant and high resistivity for wide-temperature thermistor ceramics

Core–shell structures have been proposed to improve the electrical properties of negative-temperature coefficient (NTC) thermistor ceramics. In this work, Al₂O₃-modified Co_1.5Mn_1.2Ni_0.3O₄ NTC thermistor ceramics with adjustable electrical properties were prepared through citrate-chelation followed by conventional sintering. Co_1.5Mn_1.2Ni_0.3O₄ powder was coated with a thin Al₂O₃ shell layer to form a core–shell structure. Resistivity (ρ) increased rapidly with increasing thickness of the Al₂O₃ layer, and the thermal constant (B) varied moderately between 3706 and 3846 K. In particular, Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ ceramic with 0.08 wt% Al₂O₃ showed the increase of ρ double, and the change in its B was less than 140 K. The Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ NTC ceramics showed high stability, and their grain size was relatively uniform due to the protection offered by the shell. The aging coefficient of the ceramic was less than 0.2% after aging for 500 hours at 125°C. Taken together, the results indicate that as-prepared Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ NTC ceramics with a core–shell structure may be promising candidates for application as wide-temperature NTC thermistor ceramics.