A predictive controller based on dynamic matrix control for a non-minimum phase robot manipulator

In this paper a hybrid control strategy is presented based on Dynamic Matrix Control (DMC) and feedback linearization methods for designing a predictive controller of five bar linkage manipulator as a MIMO system (two inputs and two outputs). Analyzing the internal dynamic of robot shows the open loop system is unstable and non-minimum phase, so in order to apply the predictive controller, special modifications are needed. These modifications on non-minimum phase behavior are performed using feedback linearization procedure based on state space realization. The design objective is to track a desirable set point as well as time varying trajectories as a command references with globally asymptotical stabilization. The proposed controller is applied to nonlinear fully coupled model of the typical five bar linkage manipulator with non-minimum phase behavior. Simulation results show that the proposed controller has good efficiency. The step responses of system with and without feedback linearization process illustrated that the mentioned modification for stabilizing is performed properly. After applying the proposed predictive controller, the joint angle of robot tracks the reference input while another input acts as the disturbance and vice versa.     

Parameter identification and design of a robust attitude controller using <Emphasis Type="Italic">H</Emphasis><Subscript>∞</Subscript> methodology for the raptor E620 small-scale helicopter

Rigorous control synthesis for an unmanned aerial vehicle necessitates the availability of a good, reasonable model for such a vehicle. The work reported in this paper focuses on the modeling of a rotary unmanned aerial vehicle (RUAV) and the development of a robust controller that can handle parameter uncertainties and disturbances. The parameters of the plant model are obtained through the use of the prediction error method with real flight data. The response of the identified linear model shows a good match with the measured flight data. The H _∞ control scheme is applied to obtain a robustly stable controller using the identified model. The proposed controller is analyzed using frequency-domain analysis and time-domain simulations. The performance of the proposed H _∞ controller is better than that of the conventional proportional derivative controller in that the proposed controller has a shorter settling time and less overshoot. Furthermore, the degradation of the proposed controller performance is negligible and stability is maintained when the input gains to the plant are doubled, which demonstrates the good performance and robustness of the controller.     

Calcium carbonate and ammonium polyphosphate flame retardant additives formulated to protect ethylene vinyl acetate copolymer against fire: Hydrated or carbonated calcium?

In this study, the effect of the chemical nature of different calcium (Ca)-based minerals as flame retardant additives in combination with ammonium polyphosphate (APP), in 1:1 proportions, on the flame retardancy behavior and performance of ethylene vinyl acetate copolymer was discussed. Combining APP with partly and completely hydrated calcium oxide led to superior flame-retardant function detected in mass loss calorimeter measurements with respect to the corresponding system containing carbonated calcium. This privileged character was attributed to the higher reactivity of hydrated Ca-based fillers toward APP in comparison with Ca carbonate, which induced the formation of an intumescent residue. The difference between reactivity potential of hydrated and dry Ca was demonstrated by the newly formed thermally stable species, and further evidenced by thermogravimetric analysis performed on APP/fillers blends. Moreover, the presence of more crystalline domains in the Ca/phosphorus-based compounds was evidenced by XRD analysis of the mass loss calorimeter test residues. The results of this work highlight the role of blend additive systems on the performance of flame retardancy of polymer materials.     

Simultaneous removal of copper and zinc ions by low cost natural snail shell/hydroxyapatite/chitosan composite

In this work, the snail shell/hydroxyapatite/chitosan composite was prepared as adsorbent. The adsorption potential of the composite was studied for simultaneous sorption behavior of Zn(Ⅱ) and Cu(Ⅱ) ions in a batch system. Chitosan and hydroxyapatite(HAP) were extracted from shrimp shell and bone ash,respectively, so this is a low cost natural composite. To prepare the composite, chitosan was dissolved in acetic acid, then HAP and snail shell powders were added to the chitosan solution. The morphology and characterization of the composite was studied by SEM and EDX analysis. Atomic adsorption was used to measure the amount of the ions. Experimental parameters were optimized with Design Expert Software and five parameters such as the concentration of ions, p H, adsorbent amount and contact time were studied at room temperature. Optimized value for the parameters of Zn(Ⅱ) and Cu(Ⅱ) concentrations, p H, adsorbent dose, and contact time were 3.01 mg·L~(-1), 5.5, 0.02 g and 95 min, respectively. The adsorption isotherms for Zn(Ⅱ) and Cu(Ⅱ) showed Langmuir and Tempkin, respectively. Kinetic and equilibrium studies showed the experimental data of Zn(Ⅱ) and Cu(Ⅱ) ions were best described by the pseudo-second-order model. Studies on thermodynamic show the adsorption process were physical and spontaneous.     

Improving the Pressurized Flushing Efficiency in Reservoirs: an Experimental Study

Sediment flushing in many reservoirs of the world is accomplished with low efficiency. In this study, a new configuration was proposed for reservoir bottom outlet to increase the pressurized flushing efficiency. In the new configuration, a projecting semi-circular structure was connected to the upstream edge of bottom outlet. It was observed that by employing the projecting bottom outlet, the sediment removal efficiency increased significantly compared to the flushing via typical bottom outlet. In the case of new-configuration bottom outlet with L _sc /D _outlet  = 5.26 and D _sc /D _outlet  = 1.32, the dimensionless length, width and depth of flushing cone increased 280%, 45% and 14%, respectively, compared to the reference test. The proposed structure can ensure the sustainable use of reservoirs.     

Finite-time coordination in multiagent systems using sliding mode control approach

Finite-time stability in dynamical systems theory involves systems whose trajectories converge to an equilibrium state in finite time. In this paper, we use the notion of finite-time stability to apply it to the problem of coordinated motion in multiagent systems. Specifically, we consider a group of agents described by fully actuated Euler–Lagrange dynamics along with a leader agent with an objective to reach and maintain a desired formation characterized by steady-state distances between the neighboring agents in finite time. We use graph theoretic notions to characterize communication topology in the network determined by the information flow directions and captured by the graph Laplacian matrix. Furthermore, using sliding mode control approach, we design decentralized control inputs for individual agents that use only data from the neighboring agents which directly communicate their state information to the current agent in order to drive the current agent to the desired steady state. Sliding mode control is known to drive the system states to the sliding surface in finite time. The key feature of our approach is in the design of non-smooth sliding surfaces such that, while on the sliding surface, the error states converge to the origin in finite time, thus ensuring finite-time coordination among the agents in the network. In addition, we discuss the case of switching communication topologies in multiagent systems. Finally, we show the efficacy of our theoretical results using an example of a multiagent system involving planar double integrator agents.     

Accelerated iterative methods for finding solutions of nonlinear equations and their dynamical behavior

In this paper, we present a family of optimal, in the sense of Kung–Traub’s conjecture, iterative methods for solving nonlinear equations with eighth-order convergence. Our methods are based on Chun’s fourth-order method. We use the Ostrowski’s efficiency index and several numerical tests in order to compare the new methods with other known eighth-order ones. We also extend this comparison to the dynamical study of the different methods.     

Using the genetic algorithm to enhance nonnegative matrix factorization initialization

Nonnegative matrix factorization (NMF) algorithms have been utilized in a wide range of real applications; however, the performance of NMF is highly dependent on three factors including: (1) choosing a problem dependent cost function; (2) using an effective initialization method to start the updating procedure from a near‐optimal point; and (3) determining the rank of factorized matrices prior to decomposition. Due to the nonconvex nature of the NMF cost function, finding an analytical‐based optimal solution is impossible. This paper is aimed at proposing an efficient initialization method to modify the NMF performance. To widely explore the search space for initializing the factorized matrices in NMF, the island genetic algorithm (IGA) is employed as a diverse multiagent search scheme. To adapt IGA for NMF initialization, we present a specific mutation operator. To assess how the proposed IGA initialization method efficiently enhances NMF performance, we have implemented state‐of‐the‐art initialization methods and applied to the Japanese Female Facial Expression dataset to recognize the facial expression states. Experimental results demonstrate the superiority of the proposed approach to the compared methods in terms of relative error and fast convergence.     

An analytical framework for event mining in video data

With the high availability of digital video contents on the internet, users need more assistance to access digital videos. Various researches have been done about video summarization and semantic video analysis to help to satisfy these needs. These works are developing condensed versions of a full length video stream through the identification of the most important and pertinent content within the stream. Most of the existing works in these areas are mainly focused on event mining. Event mining from video streams improves the accessibility and reusability of large media collections, and it has been an active area of research with notable recent progress. Event mining includes a wide range of multimedia domains such as surveillance, meetings, broadcast, news, sports, documentary, and films, as well as personal and online media collections. Due to the variety and plenty of Event mining techniques, in this paper we suggest an analytical framework to classify event mining techniques and to evaluate them based on important functional measures. This framework could lead to empirical and technical comparison of event mining methods and development of more efficient structures at future.     

An improved Differential Evolution algorithm using learning automata and population topologies

A new variant of Differential Evolution (DE), called ADE-Grid, is presented in this paper which adapts the mutation strategy, crossover rate (CR) and scale factor (F) during the run. In ADE-Grid, learning automata (LA), which are powerful decision making machines, are used to determine the proper value of the parameters CR and F, and the suitable strategy for the construction of a mutant vector for each individual, adaptively. The proposed automata based DE is able to maintain the diversity among the individuals and encourage them to move toward several promising areas of the search space as well as the best found position. Numerical experiments are conducted on a set of twenty four well-known benchmark functions and one real-world engineering problem. The performance comparison between ADE-Grid and other state-of-the-art DE variants indicates that ADE-Grid is a viable approach for optimization. The results also show that the proposed ADE-Grid improves the performance of DE in terms of both convergence speed and quality of final solution.