STUDIES ON POSTHARVEST PHYSIOLOGY AND THE STORAGE TECHNOLOGY OF MANGO (MANGIFERA INDICA L.)

Mango (Mangifera indica L. cv. Hongxiangya and Wacheng) was chosen to study the effect of postharvest biological characters in different storage conditions. The determining items included respiratory rate, total sugar, vitamin C (Vc) content, firmness, polyphenol oxidase (PPO) and peroxidase (POD). The results showed that both 8 and 11C were the better storage temperatures, and the storage life would last 50 days in this situation. The respiration rate increased quickly between the 16th to the 22nd days; the peak values were the 28th and 25th days at 8C for Hongxiangya and Wacheng, respectively. The flesh firmness decreased dramatically at 6 days after harvest. Total sugar content, Vc content, PPO and POD increased at first and then decreased. The color changed from green to yellow with the increase of carotenoids content. After treatment with thiabendozole and iprodione, the number of rot fruits was markedly lower than the other treatments. The best temperature is 11 and 14C for Hongxiangya and Wacheng, respectively. The rot rate is 6.77 and 8.33% with 1,000‐ppm iprodine treatment after 50‐days storage.     

噪声环境下的信号检测及其MATLAB仿真

根据雷达信号的时宽带宽乘积为常量,不能兼顾作用距离和距离分辨率的原理,使含有噪声的Chirp信号经过匹配滤波器加以检测,并对其进行了MATLAB仿真.     

基于DSP的闭环光纤陀螺研究

提出了一种基于DSP的全数字闭环光纤陀螺设计方案。文中对该闭环光纤陀螺的A／D、D／A等部分间的时序逻辑进行了设计和实现。讨论一种通过反馈调整D／A的基准电压来实现对2π复位不准确的控制。给出几个重要参数的测定方法和实验结果。     

油脂脱臭馏出物富集VE的预处理研究概述

对脱臭馏出物的性状、组成及开发前景进行了介绍,重点对脱臭馏出物的甲酯化预处理特别是酶法预处理进行了阐述,最后列举了VE提取的实例。     

人口系统迁移过程的参数辨识及其仿真

本文以系统辨识为工具，提出了迁移过程定量研究的一种方法，即运用随机牛顿法于时变系统中以辨识模型迁移表参量，同时结合卡尔曼滤波技术辨识迁移过程中另一参数－总和迁移率，将这两者融为一体，形成了辨识迁移模型参量的递推算法。本文又借助微分方程的稳定性理论讨论了净迁移情形下的辨识算法的收敛性，给出算法收敛的一个充分条件。     

永久式防倒灌隔水采油工艺在长庆油田的应用

长庆油田存在严重的套管腐蚀损坏,采取的主要治理措施是隔水采油工艺技术。原有隔水采油工艺存在隔采周期短、检泵时水层倒灌污染油层、多次隔采后坐封难度大等问题,为此,试验应用了永久式防倒灌隔水采油工艺。现场试验、应用表明,该工艺具有隔采成功率高、隔采周期长等优点,能有效防止检泵时上部水层倒灌污染油层,具有很好的应用价值和推广前景。     

Numerical Simulation of Independent Advance of Ore Breaking in the Non-pillar Sublevel Caving Method

The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.     

基于孔洞长大理论的多轴蠕变设计模型及其工程应用

多轴蠕变是高温构件失效的重要原因,工程设计中必须予以考虑.本文介绍了以孔洞长大理论为基础的多轴蠕变设计方法;探讨了孔洞长大的基本原理;讨论了基于该理论的5个常用模型;分析了这些模型在R5、ASME III、RCC-MR 及VGB-R 509L 中的应用,指出了高温构件多轴蠕变设计的困难,并对进一步的工作提出了建议.     

IPTV及相关技术

IPTV是基于IP协议的新一代技术,介绍了IPTV的主要业务功能和系统组成,并阐述了IPTV系统的关键技术。     

用于数控设备的弹性环联轴器

介绍了一种适用于数控设备改造的无键联轴器，从其原理、设计、加工各方面作了阐述，并且总结了许 多实际应用经验和适用参数。