Polyethylene oxide-polypropylene oxide -polyethylene oxide derived porous carbon materials with different molecular weights as ORR catalyst in alkaline electrolytes

Polyethylene oxide (PEO)-polypropylene oxide (PPO)-polyethylene oxide block copolymer having different molecular weights are used as precursors of carbon materials to prepare Hollow -Derivatives carbon material as an electrocatalyst through block copolymer self-assembly. The composition and microstructure of the prepared catalysts are shown by Raman spectroscopy, X-ray diffraction (XRD), Test of nitrogen adsorption and desorption curves, High resolution transmission electron microscopy (HR-TEM) and scanning electron microscopy (HR-SEM). Oxygen was passed into alkaline electrolyte solution until the solution reached saturation state. With molecular weight increasing, the obtained sample gradually changed from block to hollow and spherical. When the molecular weight was 12600 g mol^?1, the evenly hollow carbon nanocages was acquired (C-12600). In O₂ saturated alkaline electrolyte (0.1 M KOH solution), C-12600's limited current density，half-wave potential and initial potential are 5.23 mA cm^?2@0.4 V, 0.72 V and 0.81 V, respectively. And most important is that half-wave potential and onset potential have barely change after 2000 cycles of cyclic voltammetry. As a result, the porous carbon materials exhibited excellent electrocatalytic activity while maintaining high stability in alkaline KOH solution.     

Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.     

南芬选矿厂中矿磨选系统改造实践

针对本钢南芬选矿厂中矿再磨选系统精矿铁品位波动较大的问题，进行了原因分析、改造方案研究与实践。改造后的实践表明：①通过将中矿再磨选系统的1段磁选机改造为孔宽009 mm的高频振动筛，铁精矿中磁铁矿的单体解离度提高了3.06个百分点，为后续磁选获得高品质铁精矿创造了条件。②优化后流程的精矿品位和回收率均得到有效提高，精矿铁品位达到了66.82%，较改造前提高了0.81个百分点，铁回收率提高了2.53个百分点。③回收率的提高以及前段球磨机处理能力的释放，年多产7.7万t精矿，可增加销售收入3 350万元/a，年多创利润6365万元。较好地达到了改造的目的。     

基于PLM系统的轮胎口型图绘制程序开发

利用三维CAD软件建立轮胎部件口型图规范的参数化模板,通过PLM系统与三维CAD软件的集成开发功能,实现对轮胎部件口型图模板的调用和口型设计参数的规范管理。借助PLM系统强大的数据库管理及规范的版本管理规则,为工程师开发新的轮胎部件口型及调整口型参数提供便利的方法,可以实现轮胎部件口型图的数字化管理。     

地方高校安全工程专业生产实习教学改革与实践

生产实习是安全工程专业实践教学环节的重要组成部分,有助于提高本专业学生的工程实践能力。文章阐述了国内高校安全工程专业生产实习的教学现状,分析了安全工程专业生产实习中存在的主要问题,并根据工程教育专业认证标准的要求,从教学大纲、教学方法、实习基地建设、成绩考核、教材编写、教学团队建设、安全管理等方面提出了一系列改进措施,以期提高生产实习教学效果。     

红岭矿18线南西翼通风系统技术改造

针对矿山18线南西翼矿体开采过程中存在的通风系统不完善、风量欠缺、污风无法及时排出等问题，运用风压平衡原理、网络优化技术、机站优化技术以及计算机网络模拟技术展开研究，拟定了3种可行的通风方案。经技术经济比较，确定了新掘18线905～855 m回风井（1.5 m），保留该井905 m 水平回风机站，并在855 m 水平新设1台K45 6 №12风机（18.5 kW）方案。数值模拟结果表明：18线南西翼通风系统总风量达到20.5 m3/s，井下风流的可调性和稳定性增强，为矿山的安全生产提供了有力保障。     

A novel temperature-tolerant foamed resin for enhanced oil recovery

The synthesis and performance of a novel temperature-tolerant foamed resin for enhanced oil recovery were investigated using various methods, including infrared, NMR, scanning electron microscopy (SEM), and displacement experiments. Polycondensation of furfuryl alcohol prepolymers was confirmed by the infrared and NMR results. The poor temperature tolerance of furfuryl alcohol prepolymers after gelation at high temperatures is mainly due to the fracture of furan rings. The addition of ester additives is an effective method of increasing the temperature tolerance of the prepared foamed resins and can effectively reduce the weight-loss rate of the polycondensation products. The SEM results show that the skeleton structure of the foamed resin remains intact after high-temperature treatment. Thus, the novel plugging agent system has excellent thermal stability and still has a high strength (>0.8 MPa) after high-temperature aging treatment for 40 days, giving the prepared foamed resin a good plugging performance (plugging rate > 91%) at 250 °C. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47161.