Biosorption of thorium from aqueous solution by Ca-pretreated brown algae Cystoseira indica

The potential use of a biosorbent, Cystoseira indica, obtained from the Persian Gulf was investigated for the removal of Th (IV) ions from aqueous solutions by considering equilibrium, kinetic and thermodynamic aspects. The FT-IR spectra of unloaded and Th-loaded biomass indicated various functionalities on the biomass surface including hydroxyl, amide and carboxyl groups, which are responsible for the binding of thorium ions. Th (IV) uptake by C. indica was pH dependent. An increase in biosorbent dosage up to 1 g/L caused an increase in the Th (IV) percentage removal. Biosorption process at all studied initial Th (IV) ion concentrations follows the pseudo-second order kinetic model. The biosorption data could be well described by Redlich-Peterson isotherm in comparison to Langmuir and Freundlich isotherms. The maximum sorption capacity of Th (IV) by Langmuir isotherm was estimated to be 169.49 mg/g at 45 °C with pH of 3. The thermodynamic parameters indicated the biosorption of Th on the biomass was a feasible, spontaneous and endothermic process. Th sorption capacity remained unaffected or slightly affected (<10% inhibition) in the presence of several interfering ions such as uranium (VI), nickel (II) and copper (II). The reusability of the biomass was also determined after five sorption-desorption cycles.     

Spectral Fourier–Galerkin benchmark solution for natural convection in an inclined saturated porous medium

This paper presents some novel problems associated with the steady natural convection flow in an inclined square cavity filled with a saturated porous medium. The proposed method is a high-accurate spectral method based on the Fourier–Galerkin technique. The numerical results have demonstrated the advantage for the following reasons. (a) The high-accurate method deals with inclined geometries successfully. (b) The streamlines, isotherms, and the average Nusselt numbers are affected significantly by the inclination of the cavity for high values of Rayleigh number. (c) In contrast with the finite element method a highly accurate and efficient solution with less computational effort is obtained.     

A new mathematical model for integrating all incidence matrices in multi-dimensional cellular manufacturing system

In the past several years, many studies have been carried out on cellular manufacturing based on a two-dimensional machine–part incidence matrix. Since workers have important role in doing jobs on machines, assignment of workers to cells becomes a crucial factor for fully utilization of cellular manufacturing systems. In this paper, an attempt is made to solve cell formation problem and minimize the number of voids and exceptional elements in a three dimensional (cubic) machine–part–worker incidence matrix. The proposed mathematical model captures the capability of workers in doing different jobs. To demonstrate the effectiveness of the proposed model, the solution of some test problems is compared with the literature method.     

Polybutadiene/polyhedral oligomeric silsesquioxane nanohybrid: investigation of various reactants in polyesterification reaction

Nano‐sized polyhedral oligomeric silsesquioxane (POSS) diol or ethylene glycol (EG) as diol monomer was incorporated into hydroxyl‐terminated polybutadiene (HTPBD) chain in the presence of fumaryl or thionyl chloride as extenders. Using these polyesterification reactions, two fumarate‐based polyesters and two polyester sulfites were synthesized. Each couple of polyesters and polyester sulfites includes a linear (diol:EG) and a nanohybrid macromer (diol:POSS). Full structural characterization was performed using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopies. Gel permeation chromatography was undertaken to study polyesterification mechanisms by deconvolution of the obtained traces. Finally, differential scanning calorimetry, thermogravimetric analysis and cell culture were performed to evaluate the structure–property relationship for the synthesized macromers in comparison with unreacted HTPBD. © 2016 Society of Chemical Industry     

Application of LS-SVM strategy to estimate H2S loading capacity in different ionic liquids and alkanolamines

Favorable properties of aqueous solutions are improved with the addition of different materials for separation of hydrogen sulfide (H₂S). Also, equilibrium data and available equations for solubility estimation of this gas are only valid for specific solutions and limited ranges of temperature and pressure. In this regard, a machine learning model based on Support vector machine (SVM) algorithm is proposed and developed with mixtures containing different amines and ionic liquids to predict H₂S solubility over wide ranges of temperature (298–434.5 K), pressure (13–9319 kPa), overall mass concentration (3.82–100%) and mixture's apparent molecular weight (18.39–556.17 g/mol). The accuracy of the performance of this network was evaluated by regression analysis on calculated and experimental data, which had not been used in network training.     

Development of an experimentally validated semi-empirical fully-coupled performance model of a PEM electrolysis cell with a 3-D structured porous transport layer

A semi-empirical non-isothermal model incorporating coupled momentum, heat and mass transport phenomena for predicting the performance of a proton exchange membrane (PEM) water electrolysis cell operating without flow channels is presented. Model input parameters such as electro-kinetics properties and mean pore size of the porous transport layer (PTL) were determined by rotating disc electrode and capillary flow porometry, respectively. This is the first report of a semi-empirical fully coupled model which allows one to quantify and investigate the effect of the gas phase and bubble coverage on PEM cell performance up to very high current densities of about 5 A/cm². The mass transport effects are discussed in terms of the operating conditions, design parameters and the microstructure of the PTL. The results show that, the operating temperature and pressure, and the inlet water flowrate and thickness of the PTL are the critical parameters for mitigating mass transport limitation at high current densities. The model presented here can serve as a tool for further development and scale-up effort in the area of PEM water electrolysis, and provide insight during the design stage.     

The impact of gate misalignment on the analog performance of a dual-material double gate junctionless transistor

The analog performance of gate misaligned dual material double gate junctionless transistor is demonstrated for the first time. The cases considered are where misalignment occurs towards source side and towards drain side. The analog performance parameters analyzed are: transconductance, output conductance, intrinsic gain and cut-off frequency. These figures of merits (FOMs) are compared with a dual material double gate inversion mode transistor under same gate misalignment condition. The impacts of different length of control gate (L₁) for a given gate length (L) are also studied and the optimum lengths L₁ under misalignment condition to have better analog FOMs and high tolerance to misalignment are presented.     

Strand Current Distribution Modeling in Turbo-generators Using Finite-element Method Based on Proposed Dual Method

Abstract—The necessity of using a 3D model is one of the main problems for modeling Roebel bar transposition in turbo-generators by the finite-element method. This article proposes a 2D dual model for computing strand current distribution in the Roebel bar of turbo-generators. Considering the leakage and mutual inductances for each strand and the coupling inductances between them, the end winding region is modeled in this 2D dual model. In this article, the Roebel bar structure including 16 strands was considered, and these distributions are calculated for different transpositions using the finite-element method. In the finite-element method model, the circulating currents are calculated by subtracting a load current at each strand from the total of strand current. Also, for different transpositions, such as 90°, 180°, 360°, and 540°, the circulating currents are calculated using an analytical method. The obtained strand current distributions from the 2D dual model have good agreement with the obtained results from the analytical method for the 180° and 360° transposed coil models.     

调容铁心串联电抗器的原理与性能分析

针对传统的电容器无功补偿装置存在补偿容量不灵活的缺点,提出解决问题的方法是采用调容串联电抗器以实现分级补偿。通过分析电容器无功补偿装置对串联电抗器的参数要求,对调容铁心串联电抗器的工作原理及设计要点作了介绍;对无功补偿方案进行对比,说明采用调容铁心串联电抗器后收到的有益效果。