A circuit-level methodology for leakage power reduction of high-efficient compressors in 22-nm CMOS technology

Analog Integrated Circuits and Signal Processing - A new circuit-level methodology called input controlled leakage restrainer transistor (ICLRT) compatible with single threshold CMOS technology is...     

Design of an Electromagnetic Frequency Tunned Antenna for Mobile Communications

Wireless Personal Communications - Current mobile communications technology relies heavily on efficient design of antennas, where the operational characteristics of the wireless communication...     

Characterization,in vitro bioactivity and biological studies of sol-gel-derived TiO2 substituted 58S bioactive glass

Bioactive glasses (BGs) have been used for bone formation and bone repair processes in recent years. This study investigated the titanium substitution effect on 58S BGs (Ti-BGs) 60SiO₂-(36 − X)CaO-4P₂O₅-XTiO₂ (X = 0, 3, and 5 mol.%) prepared by the sol-gel technique, and the main goal was to find the optimum amount of titanium in Ti-BGs. Synthesized BGs, which were investigated after immersion in simulated body fluid (SBF), were tested by X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy. Moreover alkaline phosphate (ALP) activity, 3-(4,5dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and antibacterial studies were employed to investigate the biological properties of Ti-BGs. According to the FTIR and XRD test results, hydroxyapatite (HA) formation on Ti-BGs surfaces was confirmed. Meanwhile, the presence of 5 mol.% compared to 3 mol.% increased the HA grain distribution and their size on the Ti-BGs surface. Additionally, MTT and ALP results confirmed that the optimal amount of titanium substitution in BG was 5 mol.%. Since 5 mol.% Ti incorporated BG (BG-5) had the highest biocompatibility level, antibacterial properties, maximum cell proliferation, and ALP activity among the synthesized Ti-BGs, it is presented as the best candidate for further in vivo investigations.     

Effect of hexagonal structure nanoparticles on the morphological performance of the ceramic scaffold using analytical oscillation response

Porous bony scaffolds are utilized to manage the growth and migration of cells from adjacent tissues to a defective position. In the current investigation, the effect of titanium oxide (TiO₂) nanoparticles on mechanical and physical properties of porous bony implants made of polymeric polycaprolactone (PCL) is studied. The bio-nanocomposite scaffolds are prepared with composition of nanocrystalline hydroxyapatite (HA) and TiO₂ powder using the freeze-drying technique for different weight fractions of TiO₂ (0 wt%, 5 wt%, 10 wt%, and 15 wt%). In order to identify the microstructure and morphology of the fabricated porous bio-nanocomposites, the X-ray diffraction (XRD), atomic force microscope (AFM) and scanning electron microscopy (SEM) are employed. Also, the biocompatibility and biodegradability of the manufactured scaffolds are examined by placing them in a simulated body fluid (SBF) for 21 days, their weight and pH changes are measured. The rate of degradation of the PCL-HA scaffold can be controlled by varying the percentage of its constituent components. Due to an increasing growth and activity of bone cells and the apatite formation on the free surface of the fabricated bio-nanocomposite implants as well as their reasonable mechanical properties, they have the potential to be used as a bone substitute. Additionally, with the aid of the experimentally extracted mechanical properties of the scaffolds, the vibrational characteristics of a beam-type implant made of the proposed porous bio-nanocomposites are explored. The results obtained from SEM image indicate that the scaffolds produced by the employed method have high total porosity (70%–85%) and effective porosity. The pore size is obtained between 60 and 200 μm, which is desirable for the growth and propagation of bone cells. Also, it is revealed that the addition of TiO₂ nanoparticles leads to reduce the rate of dissolution of the fabricated bio-nanocomposite scaffolds.     

Toward a better understanding of multifunctional cement-based materials: The impact of graphite nanoplatelets (GNPs)

The impact of graphite nanoplatelets (GNPs) on the physical and mechanical properties of cementitious nanocomposites was investigated. A market-available premixed mortar was modified with 0.01% by weight of cement of commercial GNPs characterized by two distinctively different aspect ratios.The rheological behavior of the GNP-modified fresh admixtures was thoroughly evaluated. Hardened cementitious nanocomposites were investigated in terms of density, microstructure (Scanning Electron Microscopy, SEM and micro–Computed Tomography, μ-CT), mechanical properties (three-point bending and compression tests), and physical properties (electrochemical impedance spectroscopy, EIS and thermal conductivity measurements). At 28 days, all GNP-modified mortars showed about 12% increased density. Mortars reinforced with high aspect ratio GNPs exhibited the highest compressive and flexural strength: about 14% and 4% improvements compared to control sample, respectively. Conversely, low aspect ratio GNPs led to cementitious nanocomposites characterized by 36% decreased electrical resistivity combined with 60% increased thermal conductivity with respect to the control sample.     

Computer‐aided design methodology for linearity enhancement of multiwatt GaN HEMT amplifiers using multiple parallel devices

This article presents a design methodology for linearizing GaN HEMT amplifiers based on splitting a large FET into multiple parallel FETs with same total gate periphery and by biasing them individually. By varying the biases, the magnitude and the phase of the IMD3 components at the output of FET changes. A detailed simulation methodology using commercial microwave CAD software is presented. Simulation results show that by biasing one device in Class AB and other(s) in deep Class AB mode, IMD3 components of parallel FETs can be made out of phase to each other leading to cancellation and improvement in linearity. Three prototype circuits were simulated using (a) a single 5 mm FET (1 × 5 mm), (b) two parallel 2.5 mm FETs (2 × 2.5 mm), and (c) four parallel 1.25 mm FETs (4 × 1.25 mm), for a total gate periphery of 5 mm, over the frequency range of 0.8 to 1.0 GHz. IMD3 improvement up to 20 dBc was achieved with the 4 × 1.25 mm circuit when the FET biases were optimized. Measurement results show improvement in linearity up to 20 dBc for 4 × 1.25 mm circuit. The proposed method improves linearity without a substantial penalty on the power consumption and is straightforward to implement.     

Effect of ultrasonication treatment and fermentation by probiotic Lactobacillus plantarum strains on goat milk bioactivities

In the present research, the effects of continuous ultrasound treatment (100 W, 30 kHz; 0%, 30%, 60% and 90% amplitudes, 15 min) and fermentation process (37°C, 24 h) on the growth of Lactobacillus plantarum LP3 and LU5 strains and bioactive properties (peptide content, α-amylase and α-glucosidase inhibition, anticancer and antioxidant activities and exopolysaccharide content) of goat milk were investigated. According to our results, the ultrasonication of milk up to 60% amplitude promoted the growth of Lactobacillus strains and enhanced the bioactive properties compared with control during fermentation, while, the ultrasonication at 90% amplitude had negative effects on the mentioned parameters. Exopolysaccharide content, α-amylase inhibition, α-glucosidase inhibition, antioxidant activity and anticancer activity of treated samples at 60% amplitude at the end of fermentation in comparison to its beginning were increased 18.09, 12.79, 12.44, 9.4 and 1.92 folds, respectively. Also, the increase of assayed characteristics was found strain-dependent, so that L. plantarum LP3 was more effective than LU5 strain.     

A comparative study of landslide susceptibility maps produced using support vector machine with different kernel functions and entropy data mining models in China

Bulletin of Engineering Geology and the Environment - The main objective of the current study is to apply a random forest (RF) data-driven model and prioritization of landslide conditioning factors...     

Investigating the wicking behavior of micro/nanofibrous core-sheath PET–PAN yarn modified by dimethyl 5-sodium sulfoisophthalate

The present research aims at imparting an improved wicking ability to the recycled multifilament yarns by wrapping composite nanofibers to attain an efficient material for filtration purposes. Therefore, polyacrylonitrile nanofibers containing dimethyl 5-sodium sulfoisophthalate nanoparticles were wrapped around the recycled poly(ethylene terephthalate) yarn by means of a novel electrospinning technique. Several tests were performed to investigate the parameters affecting wicking rise and moisture regain of the samples. Taguchi method was used in two separate designs (with or without nanoparticles). Some factors such as polymer solution concentration, mass ratio of nanoparticles, take-up rate, and number of filaments were considered as the variable factors while yarn wicking rate and moisture regain were the response factors. It was found that the hydrophilic nature of nanoparticles together with the ultrafine structure of nanofibers provide yarns with enhanced wicking properties. Although solution concentration is the predominant factor in wicking rate of the yarns containing nanoparticles, the most effective factor in wicking rise and moisture regain for other cases is the number of filaments. The mechanism of nanoparticle effect on fluidic jet during electrospinning process is explained by theory of nanofluids stability which has never been validated experimentally in previous research studies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48185.     

On the prediction of solubility of alkane in carbon dioxide using the LSSVM algorithm

The increasing global energy demand and declination of oil reservoir in recent years cause the researchers attention focus on the enhancement of oil recovery approaches. One of the extensive applicable methods for enhancement of oil recovery, which has great efficiency and environmental benefits, is carbon dioxide injection. The CO₂ injection has various effects on the reservoir fluid, which causes enhancement of recovery. One of these effects is extraction of lighter components of crude oil, which straightly depends on solubility of hydrocarbons in carbon dioxide. In order to better understand of this parameter, in this study, Least squares support vector machine (LSSVM) algorithm was developed as a novel predictive tool to estimate solubility of alkane in CO₂ as function of carbon number of alkane, carbon dioxide density, pressure, and temperature. The predicting model outputs were compared with the extracted experimental solubility from literature statistically and graphically. The comparison showed the great ability and high accuracy of developed model in prediction of solubility.