All-digital gated ring oscillator $$\Delta \Sigma$$ modulators

This paper presents all-digital time-mode \(\Delta \Sigma\) modulators. The proposed modulators consist of a voltage-to-time integrator, a seven-stage gated ring oscillator functioning as a 3-bit quantizer, and seven digital differentiators. A detailed analysis of the nonlinear characteristics of the modulators is provided. Designed in IBM 130 nm 1.2 V CMOS technology with a 100 mV 100 kHz sinusoidal input and a 4.4 MHz frequency clock, the first-order modulator provides 47 dB SNR over 0–150 KHz bandwidth while consuming 1.1 mW while the second-order modulator provides 55 dB SNR over the same bandwidth while consuming consumes 1.45 mW.     

Effect of various surface preparation techniques on the delamination properties of vacuum infused Carbon fiber reinforced aluminum laminates (CARALL): Experimentation and numerical simulation

Carbon fiber reinforced aluminum laminates (CARALL) are one of the aluminum based Fiber metal laminates (FMLs) which, due to their high strength to weight ratio and good impact resistance are greatly replacing aluminum alloys in aircraft structures. In this research work, interlaminate shear strength of Vacuum assisted resin transfer molding (VARTM) manufactured CARALL has been investigated. Numerical simulation model incorporated with real time material data has been developed to predict the delamination behavior of CARALL laminates. Standard CARALL specimens with different surface morphologies were prepared by electric discharge machining, mechanical, chemical and electrochemical surface treatments. T-peel tests were carried out according to standard ASTM D1876-08 to find out inter laminate shear strength. FMLs made out of mechanically, chemically and electrochemically cleaned metal sheets depicted high interlaminate shear strength. SEM micrographs of failed surfaces verify the high adhesive strength of epoxy. Developed numerical simulation model accurately predicts the delamination behavior of CARALL as observed during experimentation.     

Job search website for illiterate users of Pakistan

Illiteracy is a major hurdle in socio-economic development of Pakistan. Research in the Information and Communication Technology (ICT) can help in tackling this issue by developing solutions tailored for illiterate population. The work presented within this paper proposes a job search website for illiterate population of KPK province of Pakistan. The designed website does not require any human assistance while searching a job. Moreover, the website uses culturally relevant graphical and audio content. The usability of the website is tested according to the ISO-9241-11 specification. Furthermore, we have studied the effect of the participants’ characteristics, i.e., their age, computer and mobile usage experience on the usability of the website. The results show that the participants found the website usable. Specifically, they could search suitable jobs with a minimal number of clicks and in less time as compared to the usual task completion rates reported throughout the literature. None of the participants’ characteristics were found to be affecting the usability of the website. These results suggest a promising potential of ICT solutions for providing services to illiterate population of Pakistan.     

Monitoring of Overhead Transmission Lines: A Review from the Perspective of Contactless Technologies

This paper describes a comprehensive review of non-contact technologies for overhead power transmission lines. Due to ever increasing emphasis on reducing accidents and speeding up diagnosis for automatically controlled grids, real time remote sensing and actuation is the new horizon for smart grid implementation. The technology overview with emphasis on the practical implementation of advanced non-contact technologies is discussed in this paper while considering optimization of the high voltage transmission lines parameters. In case of fault, the voltage and the current exceed limits of operation and hence real time reporting for control and diagnosis is a critical requirement. This paper aims to form a strong foundation for control and diagnosis of future power distribution systems so that a practitioner or researcher can make choices for a workable solution in smart grid implementation based on non-contact sensing.     

Scanning electron and light microscopy of foliar epidermal characters: A tool for plant taxonomists in the identification of grasses

SEM and light microscopy are of special interest for biologist to observe various features of the living bodies. In the current study we observed the foliar epidermal micro‐morphological characters of 44 grass species using SEM and Light microscopy to assess their taxonomic utility for taxonomists in the identification process. The aim of this study is to use the foliar epidermal structural variations in both upper and lower surfaces for identification of grasses. Significant diversity was observed in both qualitative and quantitative characters using SEM and Light microscopy. Variations were observed in stomatal number, size, guard cells shape, silica bodies, macro‐hairs, micro‐hairs, epidermal cell number, subsidiary cells, prickles, hooks, papillae, and short and long cells. A taxonomic key is prepared using these variations for the identification of grass species. Based on these findings, SEM and Light microscopy of foliar epidermal features can be of special interest for taxonomists in the identification of complex grass taxa.     

High‐Performance Piezoelectric,Pyroelectric, and Triboelectric Nanogenerators Based on P(VDF‐TrFE) with Controlled Crystallinity and Dipole Alignment

Poly(vinylidenefluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)), as a ferroelectric polymer, offers great promise for energy harvesting for flexible and wearable applications. Here, this paper shows that the choice of solvent used to dissolve the polymer significantly influences its properties in terms of energy harvesting. Indeed, the P(VDF‐TrFE) prepared using a high dipole moment solvent has higher piezoelectric and pyroelectric coefficients and triboelectric property. Such improvements are the result of higher crystallinity and better dipole alignment of the polymer prepared using a higher dipole moment solvent. Finite element method simulations confirm that the higher dipole moment results in higher piezoelectric, pyroelectric, and triboelectric potential distributions. Furthermore, P(VDF‐TrFE)‐based piezoelectric, pyroelectric, and triboelectric nanogenerators (NGs) experimentally validate that the higher dipole moment solvent significantly enhances the power output performance of the NGs; the improvement is about 24% and 82% in output voltage and current, respectively, for piezoelectric NG; about 40% and 35% in output voltage and current, respectively, for pyroelectric NG; and about 65% and 75% in output voltage and current for triboelectric NG. In brief, the approach of using a high dipole moment solvent is very promising for high output P(VDF‐TrFE)‐based wearable NGs.     

Solution‐Processed Extremely Efficient Multicolor Perovskite Light‐Emitting Diodes Utilizing Doped Electron Transport Layer

A specially designed n‐type semiconductor consisting of Ca‐doped ZnO (CZO) nanoparticles is used as the electron transport layer (ETL) in high‐performance multicolor perovskite light‐emitting diodes (PeLEDs) fabricated using an all‐solution process. The band structure of the ZnO is tailored via Ca doping to create a cascade of conduction energy levels from the cathode to the perovskite. This energy band alignment significantly enhances conductivity and carrier mobility in the CZO ETL and enables controlled electron injection, giving rise to sub‐bandgap turn‐on voltages of 1.65 V for red emission, 1.8 V for yellow, and 2.2 V for green. The devices exhibit significantly improved luminance yields and external quantum efficiencies of, respectively, 19 cd A^?1 and 5.8% for red emission, 16 cd A^?1 and 4.2% for yellow, and 21 cd A^?1 and 6.2% for green. The power efficiencies of these multicolor devices demonstrated in this study, 30 lm W^?1 for green light‐emitting PeLED, 28 lm W^?1 for yellow, and 36 lm W^?1 for red are the highest to date reported. In addition, the perovskite layers are fabricated using a two‐step hot‐casting technique that affords highly continuous (>95% coverage) and pinhole‐free thin films. By virtue of the efficiency of the ETL and the uniformity of the perovskite film, high brightnesses of 10 100, 4200, and 16,060 cd m^?2 are demonstrated for red, yellow, and green PeLEDs, respectively. The strategy of using a tunable ETL in combination with a solution process pushes perovskite‐based materials a step closer to practical application in multicolor light‐emitting devices.     

Thermoelectric Polymer Aerogels for Pressure–Temperature Sensing Applications

The evolution of the society is characterized by an increasing flow of information from things to the internet. Sensors have become the cornerstone of the internet‐of‐everything as they track various parameters in the society and send them to the cloud for analysis, forecast, or learning. With the many parameters to sense, sensors are becoming complex and difficult to manufacture. To reduce the complexity of manufacturing, one can instead create advanced functional materials that react to multiple stimuli. To this end, conducting polymer aerogels are promising materials as they combine elasticity and sensitivity to pressure and temperature. However, the challenge is to read independently pressure and temperature output signals without cross‐talk. Here, a strategy to fully decouple temperature and pressure reading in a dual‐parameter sensor based on thermoelectric polymer aerogels is demonstrated. It is found that aerogels made of poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) can display properties of semiconductors lying at the transition between insulator and semimetal upon exposure to high boiling point polar solvents, such as dimethylsulfoxide (DMSO). Importantly, because of the temperature‐independent charge transport observed for DMSO‐treated PEDOT‐based aerogel, a decoupled pressure and temperature sensing can be achieved without cross‐talk in the dual‐parameter sensor devices.     

Counterion-Induced Cationic Flexible Nanoparticle Catalytic of Piperidinolysis of Phenyl Salicylate

The removal of PSa^? from bulk aqueous phase to the pseudo‐micellar phase by halobenzoate counterion X is responsible for the monotonic increase in k_obs (pseudo first‐order rate constants) with the increase in the values of [MX] where MX = sodium salts of 2‐, and 4‐halobenzoic acids. The values of ion exchange constants, or for X = 2‐ and 4‐halobenzoate ions in the presence of tetradecyltrimethylammonium bromide (TTABr) were calculated from the apparent catalytic rate constants, ^Xk_cat which represent the catalytic effect of CFN. Larger values of or were observed for X = 4‐halobenzoate ions than that for X = 2‐halobenzoate ions due to isomeric factors. The values of or determined in the presence of TTABr were compared with previously determined or values in the presence of cetyltrimethylammonium bromide (CTABr). The values of or are nearly 8 ~ 9‐fold larger for 4‐IBz^?, 4‐BrBz^? and 4‐ClBz^? compared to the respective values of X = 2‐IBz^?, 2‐BrBz^? and 2‐ClBz^?. The values of or for X = 4‐FBz^? is nearly 3‐fold larger than that for X = 2‐FBz^?. The values of or for X = 2‐ and 4‐halobenzoates are significantly smaller in the presence of TTABr than these in the presence of CTABr nanoparticles.