海底输油管道内智能引导装置研究

对海底输油管道内智能引导装置研究的必要性进行了分析;介绍了国内外在该领域的技术发展状况。针对智能引导装置的作业对象和环境,提出了技术要求和指标,对智能引导装置进行了总体设计,分析了其作业机理,建立了力学模型并进行了计算。对智能引导装置的控制系统进行了设计,提出了设计过程中应注意的问题。所研制的管内轮式智能引导装置具有质量轻、输出牵引力大、体积小、结构紧凑等特点,对较小管内空间类似系统的设计有一定参考价值。     

热作模具钢表面激光堆焊耐磨合金层的研究

本文主要通过在H13钢上用大功率CO_2激光束进行堆焊,阐述了激光堆焊工艺变化对堆焊组织和性能的影响,在本试验条件下,得到了高密度弥散金属化合物组织的激光堆焊层,平均硬度为HV800,与基体呈冶金结合,耐磨性比H13模具钢提高149%。     

MIM隧道发光结的负阻现象

本文介绍了薄膜隧道发光结的基本结构、发光机理，阐述了其Ｉ－Ｖ特性中的负阻现象。简单介绍了ＭＩＭ结构负阻的几种解释，根据热像仪照片和低温测试结果分析，再结合Ｄｅａｒｍａｌｅｙ导电模型，我们提出了ＭＩＭ负阻的物理模型，理论与实验符合较好，最后分析了负阻现象的应用前景。     

The pharmacokinetics of pancuronium bromide in infants, children and adults

Laparoscopic retroperitoneal lymph node dissection is a new surgical procedure used to enhance staging in men with clinical stage I nonseminomatous germ cell tumors of the testis. The procedure has been performed in a limited number of patients at several centers with extensive laparoscopic experience. Laparoscopic retroperitoneal lymphadenectomy is a technically demanding procedure which can be successfully completed in the majority of patients. However, the risk of complications is greater than in patients who undergo standard open retroperitoneal lymph node dissection. The primary advantage of a laparoscopic approach is shortened hospitalization and rapid return to normal activity. The role of laparoscopy in the management of patients with testis malignancy has not been defined. The use of this staging procedure may help minimize the need for surveillance studies following surgery and may be best utilized in men with a lower likelihood of nodal metastases. Ultimately, prospective study in large groups of patients will be necessary to determine the role of laparoscopic retroperitoneal lymph node dissection in patients with testis cancer.     

2-乙基己酸的制备

研究了 2乙基己酸的制备 ,该反应是 2乙基己醇与氢氧化钠在催化剂存在下进行氧化、脱氢 ,生成产物2乙基己酸。通过实验找到了一种新型、高效、廉价的催化剂 ,以及最佳反应条件。通过对 2乙基己酸的分析测试 ,产品完全符合质量标准。     

正交特征群

本文在证明了有限Ａｂｅ１群Ｇ与它的特征群Ｇ√存在同构的一个必要充分条件之后，构造了一类正交特征群，从而概括了相当一大类正交变换（它包括了离散付里叶变换、阿达玛变换、数论变换、Ｃｈｒｅｓｔｅｎｓｏｎ变换）这对构成有限域与整环上的正交变换具有指导作用。     

Bounding completion times of jobs with arbitrary release times,variable execution times and resource sharing

The workload of many real time systems can be characterized as a set of preemptable jobs with linear precedence constraints. Typically their execution times are only known to lie within a range of values. In addition, jobs share resources and access to the resources must be synchronized to ensure the integrity of the system. The paper is concerned with the schedulability of such jobs when scheduled on a priority driven basis. It describes three algorithms for computing upper bounds on the completion times of jobs that have arbitrary release times and priorities. The first two are simple but do not yield sufficiently tight bounds, while the last one yields the tightest bounds but has the greatest complexity     

铌酸锂γ射线辐照色心缺陷的研究

对铌酸锂晶体进行γ射线辐照处理，吸收光谱显示基础吸收边紫移，４８０ｎｍ波长附近出现一明显吸收峰，这是由空位色心Ｖ０和Ｎｂ＾４＋缺陷引起的，Ｎｂ＾４＋的存在进一步被ＥＰＲ实验所证实。本文对上述辐照缺陷的产生机理进行了讨论。     

Modulation and Equalisation Considerations for High Performance Radio LANs

The European Telecommunications Standards Institute (ETSI) has recently defined a European standard for a high performance radio LAN (known as HIPERLAN). To operate as wired LAN replacements, these systems will operate at 5.2 GHz and support instantaneous bit rates of just under 24 Mb/s. To counteract the time dispersive nature of the indoor radio channel, the use of adaptive equalisation is suggested. In this paper a number of possible modulation and equalisation techniques are presented and, in particular, the Bit Error Rate (BER) performance of quasi-coherent GMSK combined with Decision Feedback Equalisation is explored through computer simulation. The trade off between symbol spaced and fractionally spaced equalisation is considered together with the importance of feedfoward and feedback synchronisation to the channel's power delay profile. The paper also includes a comparison of the RLS and LMS based training algorithms and compares the modem developed under the ESPRIT III LAURA project with that specified in HIPERLAN.The application of dual antenna diversity is investigated and its impact on the number of received error free data packets obtained as a function of signal leval and rms delay spread. The use of such diversity is shown to greatly improve the BER performance of a HIPERLAN modem. The problem of frequency offset is considered and modifications are proposed to the HIPERLAN frame structure to improve the receiver's tolerance to such errors. Important practical issues such as frame and symbol synchronisation, frequency offset correction and hardware implementation are discussed from both the LAURA and HIPERLAN viewpoint.