Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

Crosslink reaction of natural rubber with thiuram sulphur donors in the presence of a thiuram monosulfide

The vulcanization of natural rubber was studied with the sulfurating agents dipentamethylene thiuram tetrasulfide (DPTT) and tetramethylene thiuram disulfide (TMTD) in the presence of tetramethyl thiuram monosulfide (TMTM). This last accelerant affects the rate and efficiency of the vulcanization as well as the structures of crosslinks formed by the two sulphur donors. It may give rise to a polymerization between adjacent double bonds and generate a inhomogeneous crosslink distribution with an adverse effect on physical properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 491–499, 2002     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Dynamic Parameter Identification Based on Lagrangian Formulation and Servomotor-type Actuators for Industrial Robots

International Journal of Control, Automation and Systems - This article presents the design of a parameter identification model for industrial manipulator robots. This model includes the dynamics...     

A multimodal feature learning approach for sentiment analysis of social network multimedia

In this paper we investigate the use of a multimodal feature learning approach, using neural network based models such as Skip-gram and Denoising Autoencoders, to address sentiment analysis of micro-blogging content, such as Twitter short messages, that are composed by a short text and, possibly, an image. The approach used in this work is motivated by the recent advances in: i) training language models based on neural networks that have proved to be extremely efficient when dealing with web-scale text corpora, and have shown very good performances when dealing with syntactic and semantic word similarities; ii) unsupervised learning, with neural networks, of robust visual features, that are recoverable from partial observations that may be due to occlusions or noisy and heavily modified images. We propose a novel architecture that incorporates these neural networks, testing it on several standard Twitter datasets, and showing that the approach is efficient and obtains good classification results.     

Mobilizing Company Members' Full Innovative Potential

Most of the literature on innovation management highlights the fundamental role played by people in the innovation process and the need to fully develop the creative and innovative potential of organizations' members. This article offers the result of extensive research carried out among some of the most innovative companies in the Basque Country, a highly innovative region located in the north of Spain. It draws interesting conclusions about how these innovative companies combine strong leadership, human resource practices, and an organizational culture that enhances innovation capabilities among the company's employees. More specifically, it answers questions such as the following: Are human resources policies, leadership, and innovation culture implemented equally in Basque innovative companies? Do companies make the same effort in deploying these elements or routines and practices related to them? Can we see a pattern in the use of these elements among innovative firms? © 2012 Wiley Periodicals, Inc.     

Pressure waves in the aorta during isolated abdominal belt loading: the magnitude, phasing, and attenuation

While rupture of the aorta is a leading cause of sudden death following motor vehicle crashes, the specific mechanism that causes this injury is not currently well understood. Aortic ruptures occurring in the field are likely due to a complex combination of contributing factors such as acceleration, compression of the chest, and increased pressure within the aorta. The objective of the current study was to investigate one of these factors in more detail than has been done previously; specifically, to investigate the in situ intra-aortic pressure generated during isolated belt loading to the abdomen. Ten juvenile swine were subjected to dynamic belt loads applied to the abdomen. Intraaortic pressure was measured at multiple locations to assess the magnitude and propagation of the resulting blood pressure wave. The greatest average peak pressure (113.6 +/- 43.5 kPa) was measured in the abdominal aorta. Pressures measured in the thoracic aorta and aortic arch were 70 per cent and 50 per cent, respectively, that measured in the abdominal aorta. No macroscopic aortic trauma was observed. To the authors' knowledge the present study is the first one to document the presence, propagation, and attenuation of a transient pressure wave in the aorta generated by abdominal belt loading. The superiorly moving wave is sufficient to generate hydrostatic and intimal shear stress in the aorta, possibly contributing to the hypothesized mechanisms of traumatic aortic rupture.     

Fabrication of layered polydimethylsiloxane/perfluoropolyether microfluidic devices with solvent compatibility and valve functionality

The development of multilayer soft lithography methodology has seen polydimethysiloxane (PDMS) as the preferred material for the fabrication of microfluidic devices. However, the functionality of these PDMS microfluidic chips is often limited by the poor chemical resistance of PDMS to certain solvents. Here, we propose the use of a photocurable perfluoropolyether (PFPE), specifically FOMBLIN^® MD40 PFPE, as a candidate material to provide a solvent-resistant buffer layer to make the device substantially impervious to chemically induced swelling. We first carried out a systematic study of the solvent resistance properties of FOMBLIN^® MD40 PFPE as compared with PDMS. The comparison presented here demonstrates the superiority of FOMBLIN^® MD40 PFPE over PDMS in this regard; moreover, the results permitted to categorize solvents in four different groups depending on their swelling ratio. We then present a step-by-step recipe for a novel fabrication process that uses multilayer lithography to construct a comprehensive solvent-resistant device with fluid and control channels integrated with a valve structure and also permitting easy establishment of outside connections.     

Fast Parallel Reordering and Isomorphism Testing of k -Trees

Abstract. In this paper two problems on the class of k -trees, a subclass of the class of chordal graphs, are considered: the fast reordering problem and the isomorphism problem. An O(log ² n) time parallel algorithm for the fast reordering problem is described that uses O(nk(n-k)/\kern -1ptlog n) processors on a CRCW PRAM proving membership in the class NC for fixed k . An O(nk(k+1)!) time sequential algorithm for the isomorphism problem is obtained representing an improvement over the O(n ² k(k+1)!) algorithm of Sekharan (the second author) [10]. A parallel version of this sequential algorithm is presented that runs in O(log ² n) time using O((nk((k+1)!+n-k))/log n) processors improving on a parallel algorithm of Sekharan for the isomorphism problem [10]. Both the sequential and parallel algorithms use a concept introduced in this paper called the kernel of a k -tree.     

High power GaN‐HEMT SPDT switches for microwave applications

In this article, the design, fabrication, and on‐wafer test of X‐Band and 2–18 GHz wideband high‐power SPDT MMIC switches in AlGaN/GaN technology are presented. The switches have demonstrated state‐of‐the‐art performance and RF fabrication yield better than 65%. Linear and power measurements for different control voltages have been reported and an explanation of the dependence of the power performances on the control voltage is given. In particular, the X‐band switch exhibits a 0.4 dB compression level at 10 GHz when driven by a 38 dBm input signal. The wideband switch shows a compression level of 1 dB at an input drive higher than 38 dBm across the entire bandwidth. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.