Fabrication of layered polydimethylsiloxane/perfluoropolyether microfluidic devices with solvent compatibility and valve functionality

The development of multilayer soft lithography methodology has seen polydimethysiloxane (PDMS) as the preferred material for the fabrication of microfluidic devices. However, the functionality of these PDMS microfluidic chips is often limited by the poor chemical resistance of PDMS to certain solvents. Here, we propose the use of a photocurable perfluoropolyether (PFPE), specifically FOMBLIN^® MD40 PFPE, as a candidate material to provide a solvent-resistant buffer layer to make the device substantially impervious to chemically induced swelling. We first carried out a systematic study of the solvent resistance properties of FOMBLIN^® MD40 PFPE as compared with PDMS. The comparison presented here demonstrates the superiority of FOMBLIN^® MD40 PFPE over PDMS in this regard; moreover, the results permitted to categorize solvents in four different groups depending on their swelling ratio. We then present a step-by-step recipe for a novel fabrication process that uses multilayer lithography to construct a comprehensive solvent-resistant device with fluid and control channels integrated with a valve structure and also permitting easy establishment of outside connections.     

Ergonomic evaluation of hospital bed design features during patient handling tasks

Patient handling tasks (e.g., transportation and repositioning) are important causes of musculoskeletal disorders among healthcare workers. The purpose of this study was to evaluate, during two patient handling tasks, the physical demands resulting from alternative hospital bed design features. Twenty-four novice participants were involved in two laboratory-based studies. The effects of a steering lock and adjustable push height were evaluated during a patient transportation task using perceptual responses and measures of performance and physical demands, and the effect of a bed contour feature was determined based on patient sliding distance during repeated bed raising/lowering. Use of the steering lock reduced the number of adjustments during bed maneuvering by 28% and decreased ratings of physical demands. Use of the adjustable push height reduced shoulder moments by 30%. With the contour feature, patient sliding distance was reduced by ∼40% over 12 raise/lower cycles. These results suggest that the steering lock and adjustable push height features can reduce physical demands placed on healthcare workers during patient transportation tasks. Although patient sliding distance was reduced using the contour feature, assessing direct effects of this feature on physical demands (e.g., reduced need for workers to reposition patients) will require further investigation.

Relevance to industry

Hospital bed design features have the potential to reduce physical demands required of healthcare workers, yet there have been only limited empirical studies of these. Findings of the two current studies suggest that proactive ergonomic considerations in hospital bed design can reduce these physical demands.     

Imaging amoeboid cancer cell motility in vivo

The availability of multi-photon intravital microscopy has recently allowed researchers to start to visualise the dynamic behaviour of cancer cells in vivo. This imaging has revealed that many cancer cells ranging from carcinoma to melanoma move in an amoeboid manner in order to invade surrounding tissue and escape from the primary tumour. This mode on cell motility is extremely rapid and does not require the activity of proteases to degrade the extra-cellular matrix (ECM). This review details the techniques that are available to study cell motility in vivo and discusses the current knowledge about the mechanisms of amoeboid cell motility.     

Augmented photoelectrochemical response of CdS/ZnS quantum dots sensitized hematite photoelectrode

A visible light active and stable photoelectrode has been developed by depositing a passivating layer of ZnS QDs on CdS QDs sensitized hematite photoelectrode (Hematite‐CdS/ZnS) for PEC generation of hydrogen. Photoelectrochemical properties, in terms of stability and efficiency, have been investigated on the various hematite photoelectrodes sensitized with CdS QDs and CdS/ZnS QDs by varying number of SILAR cycles. I–V characteristics show that two layers of ZnS QDs deposited over three layers of CdS could enhance PEC response of hematite and efficiency by a factor of 3 and 11 respectively. Chronoamperometry measurement ensures that after adding a layer of ZnS QDs, CdS sensitized hematite film turns out to be a stable photoelectrode in the electrolyte. Prepared photoelectrodes have been characterized by XRD, SEM, HRTEM and UV–Vis spectrophotometer for various structural, morphological and optical properties to analyze PEC results. Mott–Schottky analysis and incident photon to current conversion efficiency (IPCE) measurements of sensitized hematite photoelectrode supported the improved PEC response of CdS/ZnS QDs sensitized hematite thin films. Copyright © 2016 John Wiley & Sons, Ltd.     

Detecting localized homogeneous anomalies over spatio-temporal data

The last decade has witnessed an unprecedented growth in availability of data having spatio-temporal characteristics. Given the scale and richness of such data, finding spatio-temporal patterns that demonstrate significantly different behavior from their neighbors could be of interest for various application scenarios such as—weather modeling, analyzing spread of disease outbreaks, monitoring traffic congestions, and so on. In this paper, we propose an automated approach of exploring and discovering such anomalous patterns irrespective of the underlying domain from which the data is recovered. Our approach differs significantly from traditional methods of spatial outlier detection, and employs two phases—(i) discovering homogeneous regions, and (ii) evaluating these regions as anomalies based on their statistical difference from a generalized neighborhood. We evaluate the quality of our approach and distinguish it from existing techniques via an extensive experimental evaluation.     

Nanocomposites based on transition metal oxides in polyvinyl alcohol for EMI shielding application

In the present work, the nanocomposites based on different transition metal oxides like iron oxide (Fe₂O₃), zinc oxide (ZnO), silicon dioxide (SiO₂), zirconium dioxide (ZrO₂), and titanium dioxide (TiO₂) in PVA matrix have been studied for their suitability as electromagnetic interference (EMI) shielding materials in the frequency range of 4–8 GHz (C-band) and 8–12 GHz (X-band). The nanocomposites containing 0.1, 0.5, 1.0, 5.0, and 10.0 wt% of oxides in the matrix were synthesised by solvent casting method. The EMI attenuation studies in 4–12 GHz frequency range were carried out using the Vector Network Analyzer R & S: ZVA40 method by measuring the loss due to reflection. The minimum reflectivity values for the composites containing Fe₂O₃, ZnO, SiO_2, ZrO₂, and TiO₂ in PVA matrix at 10 wt% concentration level in the matrix were found to be ?38.85 dB (10.4 GHz), ?33.65 dB (10.4 GHz), ?41.90 dB (10.4 GHz), ?24.90 dB (11.0 GHz), and ?32.90 dB (9.76 GHz), respectively. Based on these results, the SiO₂- and Fe₂O₃-based composites, which also exhibit high thermal stability and mechanical strength, are found to be low-cost and efficient EMI shielding materials.     

Intensification of Freeze-Drying Rate of Bacillus subtilis MTCC 2396 Using Tungsten Halogen Radiation: Optimization of Moisture Content and α-Amylase Activity

A novel freeze-drying protocol has been explored to render fast and cost-effective freeze drying of hyperamylase producing Bacillus subtilis MTCC2396 employing a tungsten halogen lamp radiator (THLR) as a heat source. Response surface methodology assessed the maximum reduction in moisture content (96.07%) and minimum reduction in α-amylase (EC 3.2.1.1) activity (1.02%) in 4 h drying time at 42.5°C radiation temperature. α-amylase activity (0.046 U) and final moisture content (3.93%) of the optimally freeze-dried bacterial strain appeared satisfactory. The freeze-drying time using THLR (4 h) is remarkably lower compared to that under a conventional conductive plate heater (CPH) (10 h) at otherwise identical conditions. The higher effective moisture diffusivity of 0.0052 to 0.0078 m ²/s under THLR compared to 0.00084 to 0.0015 m ²/s under CPH (corresponding to 20–50°C) advocated the superiority of the THLR heating protocol. The higher efficacy of THLR was also evidenced through lower activation energy (8.42 kJ/mol) of moisture diffusion compared to that (12.051 kJ/mol) of CPH. The optimally freeze-dried bacteria demonstrated the same growth rate in addition to exhibiting excellent retention of bioremedial (Hg²⁺ removal) activity to that of the control.     

Scalable approach to uncertainty quantification and robust design of interconnected dynamical systems

Development of robust dynamical systems and networks such as autonomous aircraft systems capable of accomplishing complex missions faces challenges due to the dynamically evolving uncertainties coming from model uncertainties, necessity to operate in a hostile cluttered urban environment, and the distributed and dynamic nature of the communication and computation resources. Model-based robust design is difficult because of the complexity of the hybrid dynamic models including continuous vehicle dynamics, the discrete models of computations and communications, and the size of the problem. We will overview recent advances in methodology and tools to model, analyze, and design robust autonomous aerospace systems operating in uncertain environment, with stress on efficient uncertainty quantification and robust design using the case studies of the mission including model-based target tracking and search, and trajectory planning in uncertain urban environment. To show that the methodology is generally applicable to uncertain dynamical systems, we will also show examples of application of the new methods to efficient uncertainty quantification of energy usage in buildings, and stability assessment of interconnected power networks.     

A technical framework for light- handed regulation of cognitive radios - [Topics in radio communications]

Light-handed regulation is discussed often in policy circles, but what it should mean technically has always been a bit vague. For cognitive radios to succeed in reducing the regulatory overhead, this has to change. For us, light-handed regulation means minimizing the mandates to be met at radio certification and relying instead on incentives to deter bad behavior. We put forth a specific technical framework in which the certification mandates are minimal - radios must modulate their transmitted waveform to embed an identity fingerprint, and radios must obey certain go-to-jail commands directed toward their identities. More specifically, the identity is represented by a temporal profile of taboo time slots in which transmission is impossible. The fraction of taboo slots represents the overhead of this approach and determines how reliably harmful interference can be attributed to the culprit(s) responsible. Meanwhile, the fraction of time that innocent radios spend in jail is the overhead for the punishment system. The analysis is carried out in the context of a real-time spectrum market, but is also applicable to opportunistic use.