Noise cross PSD estimation using phase information in diffuse noise field

Among various speech enhancement methods, two-microphone noise reduction systems are utilized for their low cost implementation and acceptable performance. Coherence-based methods are well known as efficient two-microphone noise reduction techniques. These techniques, however, do not work well when the received noise signals are correlated. Coherence-based methods can be improved when the cross power spectral density (CPSD) of input noises is available. In this paper, we propose a new method for estimating noise CPSD based on the assumption of a diffuse noise field. With this assumption, we estimate the noise CPSD using phase information. Then, the estimated noise CPSD is used to calculate a coherence-based gain filter which is then employed to enhance noisy signals. We compare the proposed phase-based noise CPSD estimation with a noise CPSD estimation technique based on a voice activity detector (VAD), both of which are herein separately employed in a two-microphone speech enhancement configuration. The comparison shows that the two-microphone speech enhancement scheme utilizing the proposed noise CPSD estimation technique outperforms the enhancement system using the VAD-based noise CPSD estimation.     

Influence of PP‐g‐MA on morphology,mechanical properties and deformation mechanism of copolypropylene/clay nanocomposite

Copolypropylene/organoclay nanocomposites are prepared by melt intercalation method in this research. Two different routes for addition of compatibilizer are examined, i.e. addition in the twin‐screw extruder along with the polymer and the clay powder simultaneously and premixing the compatibilizer with the reinforcement in a batch mixer before addition to the polypropylene (PP) matrix. Morphology, tensile and impact properties and deformation mechanisms of the samples made via two procedures are studied and compared with those of the noncompatibilized system. To study the structure of nanocomposites, x‐ray diffraction and transmission electron microscopy techniques are utilized. The deformation mechanisms of different samples are examined via reflected and transmitted optical microscopy. The results reveal that introduction of compatibilizer and also the procedure in which the compatibilizer is added to the compound, affect structure and mechanical properties of nanocomposite. The elastic modulus of PP‐clay nanocomposite has increased 11.5% with incorporation of compatibilizer. Also, introduction of organoclay without compatibilizer facilitates crazing at the notch tip of PP in 3PB testing. Incorporation of compatibilizer, however, makes difficulties in initiation and growth of crazes at the notch tip. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The effects of ginger intake on weight loss and metabolic profiles among overweight and obese subjects: A systematic review and meta-analysis of randomized controlled trials

This systematic review and meta-analysis of randomized controlled trials (RCTs) was performed to summarize the effect of ginger intake on weight loss, glycemic control and lipid profiles among overweight and obese subjects. We searched the following databases through November 2017: MEDLINE, EMBASE, Web of Science, and Cochrane Central Register of Controlled Trials. The relevant data were extracted and assessed for quality of the studies according to the Cochrane risk of bias tool. Data were pooled using the inverse variance method and expressed as Standardized Mean Difference (SMD) with 95% Confidence Intervals (95% CI). Heterogeneity between studies was assessed by the Cochran Q statistic and I-squared tests (I²). Overall, 14 studies were included in the meta-analyses. Fourteen RCTs with 473 subjects were included in our meta-analysis. The results indicated that the supplementation with ginger significantly decreased body weight (BW) (SMD ?0.66; 95% CI, ?1.31, ?0.01; P = 0.04), waist-to-hip ratio (WHR) (SMD ?0.49; 95% CI, ?0.82, ?0.17; P = 0.003), hip ratio (HR) (SMD ?0.42; 95% CI, ?0.77, ?0.08; P = 0.01), fasting glucose (SMD ?0.68; 95% CI, ?1.23, ?0.05; P = 0.03) and insulin resistance index (HOMA-IR) (SMD ?1.67; 95% CI, ?2.86, ?0.48; P = 0.006), and significantly increased HDL-cholesterol levels (SMD 0.40; 95% CI, 0.10, 0.70; P = 0.009). We found no detrimental effect of ginger on body mass index (BMI) (SMD ?0.65; 95% CI, ?1.36, 0.06; P = 0.074), insulin (SMD ?0.54; 95% CI, ?1.43, 0.35; P = 0.23), triglycerides (SMD ?0.27; 95% CI, ?0.71, 0.18; P = 0.24), total- (SMD ?0.20; 95% CI, ?0.58, 0.18; P = 0.30) and LDL-cholesterol (SMD ?0.13; 95% CI, ?0.51, 0.24; P = 0.48). Overall, the current meta-analysis demonstrated that ginger intake reduced BW, WHR, HR, fasting glucose and HOMA-IR, and increased HDL-cholesterol, but did not affect insulin, BMI, triglycerides, total- and LDL-cholesterol levels.     

Investigation of production parameters in fracture behavior of hot-pressed Al2O3–SiC/graphite fibrous monolithic ceramics: Fibers orientation and cell boundary fraction

Fibrous monoliths (FMs) exhibit graceful failure in flexure and have higher toughness values. In this research, a mixture of Al₂O₃ and SiC as the core and graphite as the shell material of fibers were produced by extrusion-molding technique and after aligning along intended directions (0°, 90°, and 0°/90°) were sintered using the hot-pressing method at the temperature of 1500°C under pressure of 35 MPa for 1 hour. The significance of fibers orientation angle and the cell to cell boundary volume ratio in defining the fracture behavior of the FMs was detected. Because of the extensive crack interactions with graphite cell boundary such as crack deflection and delamination, with increasing cell boundary content from 25 to 30 vol%, the fracture toughness was enhanced. The highest flexural strength (184.8 ± 0.61 MPa) obtained from samples with 0° fibers orientation compared to 0°/90°. Since in the transverse plies (layers with 90° aligning), the properties of matrix phase are dominant, hence the strength in specimens with 0°/90° fibers orientation decreased considerably due to weak graphite matrix phase. In addition, the fracture toughness value increased up to 8.35 ± 0.74 MPa·m^1/2 for the unidirectional architecture of (0°) in comparison with cross-ply (0°/90°) architecture.     

Cube-octameric silsesquioxane (POSS)-capped magnetic iron oxide nanoparticles for the efficient removal of methylene blue

Octavinyl polyhedral oligomeric silsesquioxane (POSS) was polymerized on the surface of Fe3O4 nanoparticles (NPs) and then the NPs were functionalized with carboxylic acid groups using thiol-ene click reactions with thioglycolic acid.The as-prepared Fe3O4@POSS-COOH magnetic hybrid NPs had mesoporous structures with an average particle diameter of 15 nm and a relatively high specific surface area of 447 m^2· g^-1.Experimental results showed that 4 mg of Fe3O4@POSS-COOH NPs efficiently adsorbed and removed methylene blue from water at 5 min.This is due to the presence of both carboxylic acid and pendant vinyl groups on the Fe3O4@POSS-COOH NPs.These NPs could be easily withdrawn from water within a few seconds under moderate magnetic field and showed high stability in acid and alkaline aqueous mediums.     

Thermodynamic Phase Diagram,Half-Metallic and Optical Properties of the Zr2TiSi [111] Films Based on DFT

Silicon - Thermodynamic stability, electronic and optical properties of the Zr2TiSi compound in the bulk and its [111] films have been investigated, based on the density functional theory (DFT)...     

Comparison of the Calculated Drought Return Periods Using Tri-variate and Bivariate Copula Functions Under Climate Change Condition

Water Resources Management - Concerning the various effects of climate change on intensifying extreme weather phenomena all around the world, studying its possible consequences in the following...     

A chromium complex under water oxidation: A conversion mechanism and a comprehensive hypothesis

Water splitting toward hydrogen production is a promising method to store energy, but water oxidation is a bottleneck for water splitting. First-row transition metal complexes have been extensively used for water-oxidation reaction. However, only one chromium complex has been applied for water-oxidation reaction until now. Thus, the reinvestigation of water-oxidation reaction by this chromium complex in detail is interesting. Herein, water-oxidation reaction by the chromium complex with diphenoxy N,N′-ethylenebis(salicylimine) (SALEN) ligand is reinvestigated using scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction studies, X-ray photoelectron spectroscopy, thermal gravimetric analysis, elemental analysis, Fourier-transform infrared spectroscopy, and electrochemical methods. All the experiments showed that the chromium complex is neither a catalyst nor a precatalyst for water-oxidation reaction. During OER, a relationship between first-row transition metal complexes and the related metal oxides has been proposed.     

A review of application of amine-terminated dendritic materials in textile engineering

Over the last decade, dendritic structures including hyperbranched polymers, dendrigrafts, dendrons, and dendrimers due to their distinct structural design such as highly branched structure and a large number of reactive end groups have received considerable attention. Among various kind of dendrimer, particularly amine-terminated dendritic materials like polyamidoamine (PAMAM), polypropylene imine (PPI), and polyethylene imine (PEI) have been introduced as the potential candidates in a wide range of areas, particularly in the field of textiles engineering. Hence, this review provides an introduction of amine-terminated dendritic polymers and new potential applications of them in textiles engineering such as improvement of dyeability, salt-free dyeability, antimicrobial activity, long-lasting fragrant fabric, anti-ultraviolet property, drug delivery through fabric, flame retardancy, and wastewater treatment. Regarding the complex synthesis of dendrimers which makes them expensive products, application of amine-terminated hyperbranched polymers provides affordable dendritic polymers to create novel features.