Evaluation of Various Surface Irrigation Numerical Simulation Models

In this study, a zero-inertia model (ZIMOD) is presented to simulate all phases of border and furrow irrigation systems. The governing equations were discretized using a control volume of moving cells, by procedures reported in the literature for borders and for furrows. Later, the discretized equations were linearized by applying a Taylor series expansion according to the Newton-Raphson procedure, and then the algebraic linearized equations were iteratively solved using the Gaussian elimination technique. The ZIMOD was verified against several field experimental data and output of various numerical models in the SIRMOD package. Computational times, errors in predicting advance and recession trajectories, and estimated runoff and infiltrated volumes were compared. All models used in the comparative analysis predicted the advance and recession times and the infiltrated and runoff volumes satisfactory. However, models in the SIRMOD package were computationally faster than ZIMOD.     

Three-Dimensional Effects in Microcrack Nucleation in Brittle Polycrystals

Stress concentration at vertices where grains of a polycrystal meet at a point is contrasted with stress concentration at two-dimensional junctions where grains join along a line. Effects of thermal anisotropy and elastic anisotropy orientation mismatches from grain to grain are considered. Special geometries with moduli mismatches are also analyzed to shed light on three-dimensional vs two-dimensional behavior. Although there are exceptions, it is generally found that the stress concentration at vertices is more singular than that at junctions. Singularities which are stronger than cracklike singularities (i.e., stress α r ^{− s} where s > 1/2) are found, and the implication of such "super singularities" for microcrack nucleation is discussed. Conditions for propagation of microcrack flaws at vertices are analyzed and contrasted with those at junctions.     

The Influence of Office Furniture,Workstation Layouts,Diffuser Types and Location on Indoor Air Quality and Thermal Comfort Conditions at Workstations

Abstract Many factors affect the airflow patterns, contaminant removal efficiency and the indoor air quality at individual workstations in office buildings. The effects of office furniture design and workstation layouts on ventilation performance, contaminant removal efficiency and thermal comfort conditions at workstations were studied. The range of furniture configurations and environmental parameters investigated included: 1) partition heights, 2) partition gap size, 3) diffuser types, 4) supply air diffuser location relative to the workstation, 5) return air grill location relative to the workstation, 6) heat source locations, 7) presence of furniture, 8) supply air temperatures, 9) adjacent workstations, 10) contaminant source locations, 11) supply air flow rates, and 12) outdoor air flow rates. The tracer gas technique was used to study experimentally the relative impact of these parameters on the air distribution and ventilation performance, as well as contaminant removal efficiency. Thermal environmental parameters such as air velocity and temperature were monitored at several locations to characterize the impact of these parameters on the thermal comfort conditions. The results showed that the outdoor air flow rate had a significant influence on the mean age of air. The air distributions at all the workstations were good even when the supply air flow rate was relatively low (i.e 5 L/s). At the same time, most of the parameters tested had a significant influence on contaminant removal efficiency when there was a contaminant source present somewhere in the office.     

Modelling of volatile organic compounds emission from dry building materials

A numerical and an analytical model were developed to predict the volatile organic compound (VOC) emission rate from dry building materials. Both models consider the mass diffusion process within the material and the mass convection and diffusion processes in the boundary layer. All the parameters, the mass diffusion coefficient of the material, the material/air partition coefficient, and the mass transfer coefficient of the air can be either found in the literature or calculated using known principles.

The predictions of the models were validated at two levels: with experimental results from the specially designed test and with predictions made by a CFD model. The results indicated that there was generally good agreement between the model predictions, the experimental results, and the CFD results. The analytical and numerical models then were used to investigate the impact of air velocity on emission rates from dry building materials. Results showed that the impact of air velocity on the VOC emission rate increased as the VOC diffusion coefficient of the material increased. For the material with a diffusion coefficient >10⁻¹⁰ m²/s, the VOC emission rate increased as the velocity increased; air velocity had significant effect on the VOC emission. For the material with a VOC diffusion coefficient <10⁻¹⁰ m²/s, the VOC emission rate increased as the velocity increased only in the short-term; <24 h. In the medium to long-term time range, the VOC emission rate decreased slightly as the air velocity increased; velocity did not have much impact on these materials. Furthermore, the study also found that the VOC concentration distribution within the material; the VOC emission rate and the VOC concentration in the air were linearly proportional to the initial concentration. However, the normalized emitted mass was not a function of the initial concentration: it was a function of the properties of the VOC and the material.     

Classification of carbon in Canadian fly ashes and their implications in the capture of mercury

Fly ashes produced from Canadian power plants using pulverized coal and fluidized bed combustors were examined for their carbon content to determine their ability to capture mercury. The feed coal used in these power plants were lignite, subbituminous, high and medium volatile bituminous, their blends, and also blends of coal with petroleum coke (Petcoke). The carbon and mercury content of the coals and fly ashes were determined using the ASTM standard method and by the cold vapour atomic absorption spectrometry method. The carbon content of the fly ash was concentrated by strong acid digestion using HCl and HF. The quantitative and qualitative analyses of the carbon concentrate were made by using a reflected light microscope. The results show that the carbon content of fly ash appears to be partially related to depositional environment during coalification and to the rank of the coal. The Hg captured by the fly ash depends on the rank and blend of the feed coals and the type of carbon in the fly ash. The isotropic vitrinitic char is mostly responsible for the capture of most Hg in fly ash. The inadvertent increase in carbon content due to the blending of coal with petroleum coke did not increase the amount Hg captured by the fly ash. The fly ash collected by the hot side electrostatic precipitator has a low Hg content and no relation between the Hg and carbon content of the ash was observed. These results indicate that the quantity of carbon in the fly ash alone does not determine the amount Hg captured. The types of carbon present (isotropic and anisotropic vitrinitic, isotropic inertinitic and anisotropic Petcoke), the halogen content, the types of fly ash control devices, and the temperatures of the fly ash control devices all play major roles in the capture of Hg.     

Generalized Coupled Thermoelasticity of a Layer

The generalized thermoelasticity based on the Lord-Shulman (LS), Green-Lindsay (GL), and Green-Naghdi (GN) theories admit the second sound effect. By introducing some parameters all these theories are combined and a unified set of equations is rendered. These equations are then solved for a layer of isotropic and homogeneous material to study the thermal and mechanical wave propagations. The disturbances are generated by a sudden application of temperature to the boundary. The non-dimensionalized form of the governing equations are solved utilizing the Laplace transform method in time domain. Closed form solutions are obtained for the layer in Laplace transform domain, and a numerical inverse Laplace transform method is used to obtain the temperature, displacement, and stress fields in the physical time domain. The thermo-mechanical wave propagations and reflections from the layer boundaries are investigated.     

THERMOELASTICITY SOLUTION OF A LAYER USING THE GREEN–NAGHDI MODEL

The Green–Naghdi (GN) linear theory of thermoelasticity of types II (without energy dissipation) and III (with energy dissipation) for homogeneous and isotropic materials is employed to study thermal and mechanical waves in a layer. The disturbances are generated by sudden application of temperature to the boundary. The dimensionless forms of the governing equations are solved utilizing the Laplace transform method. Closed-form solutions are obtained for a layer in the Laplace domain, and a numerical inversion of the Laplace transform method is used to obtain the temperature, displacement, and stress fields in the physical time domain. Thermomechanical wave propagation and reflection from the boundary layer are investigated and the influence of the damping parameter on the temperature, displacement, and stress fields in the GN type III theory is discussed.     

Classifying inventory using an artificial neural network approach

This paper presents artificial neural networks (ANNs) for ABC classification of stock keeping units (SKUs) in a pharmaceutical company. Two learning methods were utilized in the ANNs, namely back propagation (BP) and genetic algorithms (GA). The reliability of the models was tested by comparing their classification ability with two data sets (a hold-out sample and an external data set). Furthermore, the ANN models were compared with the multiple discriminate analysis (MDA) technique. The results showed that both ANN models had higher predictive accuracy than MDA. The results also indicate that there was no significant difference between the two learning methods used to develop the ANN.     

Microstructure and mechanical properties of friction stir weld of dissimilar AZ31-O magnesium alloy to 6061-T6 aluminum alloy

Dissimilar friction stir welding between AZ31-O Mg and 6061-T6 Al alloys was investigated. 3 mm thick plates of aluminum and magnesium were used. Friction stir welding operations were performed at different rotation and travel speeds. The rotation speeds varied from 600 to 1400 r/min, and the travel speed varied from 20 to 60 mm/min. Defect-free weld was obtained with a rotation speed of 1000 r/min and travel speed of 40 mm/min. Metallographic studies showed that the grain size in the stir zone is much finer than that in the base metals. Complex flow pattern was formed in the stir zone. Microhardness measurement revealed an uneven distribution in the stir zone. Tensile test results indicated that the tensile strength of the welded specimen is about 76% of AZ31 Mg alloy and 60% of the 6061 Al alloy in tensile strength. SEM fracture surface image of the welded specimen indicated that the welded specimen failed through brittle-mode fracture.     

Assessing the performance of air cleaning devices – A full-scale test method

Activated carbon filters have been used for purification of air and water in industrial applications. However, these technologies have not been applied to the non-industrial built environment in general and there is no standard to quantify or to classify the performance of these systems for in-duct mechanical system application. The development of a standard test procedure is a very timely effort, since it would create a benchmark for evaluating the contaminant reduction of these systems. A full-scale test facility was designed and constructed to investigate the removal effectiveness of commercial gas-phase air cleaning devices. The test rig was verified by conducting the system pre-qualification tests. These series of tests were designed to quantitatively verify the reliability of the test rig for gas filter application. These tests include air tightness, velocity uniformity, uniform dispersion of challenge contaminants, temperature and humidity control. This paper first describes the experimental set-up for testing of in-duct air cleaner systems and its verification, and then presents the experimental results of four different kinds of commercial gaseous filters.