常用激光介质膜的斜入射性能

本文给出了多层介质膜反射率与入射角的关系的计算机程序，并列出了部份常用激光膜片反射率-角度曲线。     

Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

宣钢1260 m3高炉扩容大修改造设计

宣钢l260m^3高炉大修改造时将炉容扩大到l350m^3，对高炉本体系统设备及冷却系统、自动控制及检测系统进行了全面的改造更新，在炉腹、炉腰及炉身下部高热负荷区域采用铜冷却壁，取消炉身中上部铸铁冷却壁凸台，并采用薄内衬等先进、适用、可靠、成熟的技术。     

用离散复镜像方法计算任意形状微带贴片的散射

采用离散复镜像方法(DCIM)计算微带结构的空间域格林函数，提高了计算阻抗矩阵的速度。采用三角矢量面元(RWG)基函数，模拟电流分布。由于三角形可以模拟任意形状的贴片，本文的方法可以准确地计算任意形状贴片的散射。数值结果证实了本文方法的有效性。     

Abstract Implementation of Algebraic Specifications in a Temporal Logic Language

A formal technique for incorporating two specification paradigms is presented,in which an algebraic specification is implemented by a set of abstract procedures specified in pre and post-condition style.The link between the two level specifications is provided via a translation from terms of algebraic specifications into temporal logic formulae representing abstract programs.In terms of translation,a criterion for an abstract implementation satisfying its specification is given,which allows one to check the consistency between the two levels of specifications.The abstract implementations can be refined into executable code by refining each abstract procedure in it.It is proved that the satisfication relation between a specification and its implementations is preserved by such refinement steps.     

混凝土预制板防渗渠道技术探讨

介绍了混凝土预制板防渗渠道施工过程及施工方法,并提出施工中应注意的问题。     

五氧化二钽薄膜的制备及其I-U特性

本文利用脉冲直流反应磁控溅射的方法制备了五氧化二钽 (Ta2 O5)薄膜 ,俄歇电子能谱仪测试了薄膜的成分含量 ,椭偏仪测试了Ta2 O5薄膜的厚度和折射率 ,XRD分析了薄膜的晶体结构 ,并且分别研究了氧气含量、基底温度等成膜工艺对薄膜的影响。研究结果表明薄膜的成分主要是由氧气含量决定的。利用金属 绝缘体 (介质膜 ) 金属 (MIM)结构初步对Ta2 O5薄膜进行了电学性能的测试 :皮安电流电压源测试了薄膜的I U特性 ,制备出的薄膜折射率在 2 1～ 2 2 ,MIM的I U特性曲线显示了较好的对称性和低的漏电流密度     

多功能超高速计数器

脉冲信号计数是最简单的数据获取工作和最基本的测量方法。在许许多多高科技领域中,对计数器(Counter)计数分辩率提出很高要求。当前,核物理上应用的计数器都有计数率较高(最高为200MHz),结构复杂,价格昂贵的缺点。本文报导我们最新研制的一种计数率为500MHz的超高速计数器,后级采用Intersil公司生产的通用计数器电路ICM7216B,只需外接少量元件就可构成最简单多功能超高速计数系统。     

非接触式半导体少子寿命测试方法——微波反射法

介绍了一种非接触式用于测量少子寿命的微波反射法，并与通常的光电导衰退法进行了比较。     

CROSS-SPECTRAL MOMENT AND SVD METHODS ESTIMATING THE PARAMETERS OF CLOSE SINUSOIDS IN COLORED NOISE

The cross-spectral estimation methods are efficient in estimating the parameters of sinusoidal signals embedded in colored noise. But up to now, only FPT and cross-periodogram methods are used in this field, the modern auto-spectral estimation method is introduced into cross-spectral estimation in this paper, meanwhile the cross-correlation based Yule-Walker equation is proposed theoretically and the moment and singular-value decomposition (SVD)) algorithms for cross-spectral estimation have been developed. Finally, a numerical example is given for comparing the presented methods with the well-known Cadzow's SVD method.