Dairy cows with prolonged calving seek additional isolation

In modern calving facilities, dairy cows either calve in a group pen or are moved to a separate individual pen when calving is imminent. In practice, cows are often moved too close to calving, which poses a health risk to cow and calf. Thus, a need exists for new calving facility designs and management practices that better align with the motivations of the cow. This study examined dairy cow preferences for individual calving pens by offering 3 different levels of isolation (tall and narrow, low and wide, and tall and wide) by analyzing the association between precalving behavior, choice of degree of isolation, and the progress of calving. The hypotheses were that cows would prefer the highest level of isolation when giving birth, and that calving in a high level of isolation would be associated with less restlessness and a shorter calving duration. Contrary to these hypotheses, no specific preference between degrees of isolation or difference in calving behavior in the different calving pens was found. However, cows experiencing a longer calving duration chose to calve in the most secluded calving pen (tall and wide). These results cannot determine cause and effect, but may suggest that interactions between motivation for isolation seeking and calving behavior exist.     

Crosslinking of polybenzimidazole membranes by divinylsulfone post‐treatment for high‐temperature proton exchange membrane fuel cell applications

Phosphoric acid‐doped polybenzimidazole (PBI) has been suggested as a promising electrolyte for proton exchange membrane fuel cells operating at temperatures up to 200 °C. This paper describes the development of a crosslinking procedure for PBI membranes by post‐treatment with divinylsulfone. The crosslinking chemistry was studied and optimized on a low‐molecular‐weight model system and the results were used to optimize the crosslinking conditions of PBI membranes. The crosslinked membranes were characterized with respect to chemical and physiochemical properties, showing improved mechanical strength and oxidative stability compared with their linear analogues. Fuel cell tests were further conducted in order to demonstrate the feasibility of the crosslinked membranes. Copyright © 2011 Society of Chemical Industry     

Unsuccessful retrieval attempts enhance subsequent learning.

Taking tests enhances learning. But what happens when one cannot answer a test question—does an unsuccessful retrieval attempt impede future learning or enhance it? The authors examined this question using materials that ensured that retrieval attempts would be unsuccessful. In Experiments 1 and 2, participants were asked fictional general-knowledge questions (e.g., “What peace treaty ended the Calumet War?”). In Experiments 3–6, participants were shown a cue word (e.g., whale) and were asked to guess a weak associate (e.g., mammal); the rare trials on which participants guessed the correct response were excluded from the analyses. In the test condition, participants attempted to answer the question before being shown the answer; in the read-only condition, the question and answer were presented together. Unsuccessful retrieval attempts enhanced learning with both types of materials. These results demonstrate that retrieval attempts enhance future learning; they also suggest that taking challenging tests—instead of avoiding errors—may be one key to effective learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of NiO-to-Ni Transformation on Conductivity and Structure of Yttria-Stabilized ZrO2

The conductivity and structure of 8-mol%-yttria-stabilized zirconia with additions of nickel oxide has been investigated, both in the as-prepared state and after reduction of NiO in hydrogen. During reduction at 1000°C, the conductivity decreases by 40%–50% and most of the NiO dissolved in the zirconia is exsolved in the form of nickel particles. This is accompanied by the formation of tetragonal zirconia precipitates of size 10–40 nm and by an increase in the lattice parameter. On reoxidation in air at 1000°C, the change in lattice parameter is partly reversed, but the conductivity shows no further changes.     

Autogenous deformation and RH-change in perspective

Autogenous deformation and change of the relative humidity (RH-change) have been described and registered for a century. However, it is only within the last decade that these phenomena have received appreciable attention. The reason for this is that autogenous deformation and autogenous RH-change are phenomena of special importance within high-strength (high-performance) concrete technology, and a significant utilisation of these concretes did not take place until the early 1980s. In the present paper an historical overview of autogenous deformation and RH-change is given. In addition, due to the present status of this research field both terminology and measuring techniques are described in detail. Finally, some expectations for future research in this field are given.     

An evaluation tool for design quality: PFI sheltered housing

The complex procurement process entailed by the private finance initiative (PFI) means that clients need new capacities to manage their relationships with bidders and to assess project proposals if the desired level of design quality is to be achieved. To assist local authorities in their client role, a new Architectural Design Quality Evaluation Tool was developed. The aim was to improve the quality of design in residential sheltered housing, procured through the PFI. The tool was developed for and applied to a programme that will see the replacement of a local authority's entire sheltered housing stock. The tool has two functions: (1) to inform the client's assessment process and assist with the selection of the preferred bidding consortium through a series of stages in the PFI process; and (2) to improve the quality of all the submitted designs through an iterative process. Although several existing mechanisms are available for evaluating the performance attributes of buildings, few also tackle the less tangible amenity attributes, which are vital to the feeling of home. The new tool emphasizes the amenity attributes without neglecting performance.     

Epoxy–graphite oxide nanocomposites: Mechanical properties

Graphite oxide (GO) produced by Hummers method was added to epoxy for strengthening purpose. Generally the E‐modulus was increased due to the GO addition; however, depending on the treatment of the GO an increase or decrease was observed for the glass transition temperature. The change in glass transition was a result of changes in the curing behavior. Addition of GO initially increased the curing speed; however, the final curing degree was lower and was dependent on the type of GO added. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43591.     

Bioavailability Studies and in vitro Profiling of the Selective Excitatory Amino Acid Transporter Subtype 1 (EAAT1) Inhibitor UCPH‐102

Although the selective excitatory amino acid transporter subtype 1 (EAAT1) inhibitor UCPH‐101 has become a standard pharmacological tool compound for in vitro and ex vivo studies in the EAAT research field, its inability to penetrate the blood–brain barrier makes it unsuitable for in vivo studies. In the present study, per os (p.o.) administration (40 mg kg^?1) of the closely related analogue UCPH‐102 in rats yielded respective plasma and brain concentrations of 10.5 and 6.67 μm after 1 h. Three analogue series were designed and synthesized to improve the bioavailability profile of UCPH‐102, but none displayed substantially improved properties in this respect. In vitro profiling of UCPH‐102 (10 μm ) at 51 central nervous system targets in radioligand binding assays strongly suggests that the compound is completely selective for EAAT1. Finally, in a rodent locomotor model, p.o. administration of UCPH‐102 (20 mg kg^?1) did not induce acute effects or any visible changes in behavior.     

Purification of Biorefinery Lignin with Alcohols

After hydrothermal pretreatment and enzymatic hydrolysis of wheat straw, a slurry rich in lignin but with a high content of inorganic substances, especially silica, and residual carbohydrates is produced. This slurry was used to develop an ethanol organosolv separation method to produce silica-free lignin fractions. The addition of para toluene sulphonic acid (PTSA) and the use of two alternative long-chain alcohols, oleyl alcohol or nonylphenol, were tested. In every reaction, two lignin fractions were produced and their molecular size and elemental composition were characterized. The yield of each fraction and the change in MWD were studied as a function of temperature and solid to liquid ratio. At 100, 150, and 200°C and with the use of PTSA, high-purity lignin fractions were obtained. After lignin fractionation with nonylphenol, a liquid silica-free product with high lignin content was obtained in yields between 17 and 72%.     

Indentation deformation and cracking behavior of hydrated aluminoborate glasses

Aluminoborate glasses have recently been found to feature high resistance to crack initiation during indentation due to a highly flexible network structure. In cesium aluminoborate glasses, it has been found that the use of a simple post-treatment, namely aging in a humid atmosphere, can further improve this resistance. To better understand the mechanical properties of this glass family upon humid aging, we here study the effect of aging conditions on the structure and mechanical properties of Li,K,Cs-aluminoborate glasses. As expected, we find that higher humidity and longer aging time cause more pronounced permeation of atmospheric water into the glasses. Due to their denser structure and stronger modifier-oxygen bonds, the humid aging has a relatively smaller effect on the mechanical properties of Li- and K-containing glasses relative to Cs-containing glasses, with the latter achieving an ultrahigh crack resistance. We find that the humid aging leads to the formation of a hydration layer in the Cs-aluminoborate glass surface, with a thickness of around 26 μm upon aging at 23 °C with 40% relative humidity for 7 days. Moreover, a remarkable indentation behavior, that is, the observation of μm-sized shear bands inside the imprint of the Cs-glass upon aging at 60% relative humidity is reported. Taken as a whole, the work provides guidelines for how to control the humid aging rate as a function of relative humidity and temperature to form a hydration layer and thus achieve improved crack resistance in such glasses.