彩色不锈钢生产工艺及其耐蚀性的研究

采用添加了ＣＳ－１添加剂的常规的不锈钢着色液可以生产出彩色不锈钢。所获彩色膜除包括在常规的着色液中可获得的颜色外，还能着出茶色、咖啡色、古铜色等颜色。通过动电位扫描极化曲线等的测量和分析，研究了所得着色膜的耐蚀性能，并解释着色膜经硬化处理后，耐蚀性得到提高的原因。     

Redox chemistry of gold(i) phosphine thiolates: sulfur-based oxidation

The redox chemistry of mononuclear and dinuclear gold(I) phosphine arylthiolate complexes was recently investigated by using electrochemical, chemical, and photochemical techniques. We now report the redox chemistry of dinuclear gold(I) phosphine complexes containing aliphatic dithiolate ligands. These molecules differ from previously studied gold(I) phosphine thiolate complexes in that they are cyclic and contain aliphatic thiolates. Cyclic voltammetry experiments of Au(2) (LL)(pdt) [pdt = propanedithiol; LL = 1,2-bis(diphenylphosphino)-ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp), 1,4-bis(diphenylphosphino)butane (dppb), 1,5-bis(diphenylphosphino)pentane (dpppn)] in 0.1 M TBAH/CH(3)CN or CH(2)Cl(2) solutions at 50 to 500 mV/sec using glassy carbon or platinum electrodes, show two irreversible anodic processes at ca. +0.6 and +1.1 V (vs. SCE). Bulk electrolyses at +0.9 V and +1.4 V result in n values of 0.95 and 3.7, respectively. Chemical oxidation of Au(2)(dppp)(pdt) using one equivalent of Br(2) (2 oxidizing equivalents) yields 1,2-dithiolane and Au(2)(dppp)Br(2). The reactivity seen upon mild oxidation /= +1.3 V) is consistent with oxidation of gold(I) to gold(III). Structural and electrochemical differences between gold(I) aromatic and aliphatic thiolate oxidation processes are discussed.     

风力发电机塔架的涂装

按照设计要求制备用于风力发电机塔架的防腐蚀配套涂料,塔架的筒体内部涂层由环氧树脂聚酰胺富锌底漆和环氧树脂聚酰胺云母氧化铁中涂漆组成,筒体外部涂层由环氧树脂聚酰胺富锌底漆、环氧树脂聚酰胺云母氧化铁中涂漆和丙烯酸脂肪族聚氨酯面漆组成。该涂料体系的防腐涂层可常温固化,厚度达到275μm,防腐蚀寿命可达20年之久,其防腐效果、耐冲击性和耐候性良好。文章同时讨论了涂装工艺过程中易出现的问题及解决办法。     

低QI含量煤沥青氢化产物的结构性质研究

以低QI净化沥青为原料，采用四氢萘高压加氢制取了氢化沥青，采用IR，NMR和TGA分析对氢化沥青及其原料净化沥青进行了对比研究，结果发现氢化沥青含有大量脂环结构，其独特的热解缩聚行为有利于可溶性中间相沥青的制备。     

Mercury transformation across particulate control devices in six power plants of China: The co-effect of chlorine and ash composition

This paper presents the results of field measurements on mercury speciation in six power plants of China by applying the Ontario hydro method. During the tests, flue gas was sampled simultaneously before and after particulate control devices (electrostatic precipitator and fabric filter baghouse) along with the pulverized coal, bottom ash and fly ash sampling. The amount of oxidized mercury in gas phase before and after ESP/FF suggests that mercury oxidation after combustion is a kinetically controlled process. The comparison of mercury speciation in different power plant indicates a clear relationship with coal type, especially the chlorine concentration and the basic ash compositions in coal. Both of the factors are analyzed quantitatively in this study. A new parameter C (ratio of chlorine in coal to base/acid ratio) has been introduced to evaluate the co-effect of the two factors above on mercury speciation.     

聚苯胺的合成、表征及气敏性能研究

用化学氧化聚合法,以苯胺(An)为单体,过硫酸铵(APS)为氧化剂,控制反应温度,在酸性介质(无机酸和有机酸)中合成聚苯胺(PAn)。用傅里叶红外光谱(FTIR)和紫外可见光光谱(UV-Vis)对聚苯胺掺杂前后结构的变化进行了测试,讨论了酸掺杂对聚合产物结构的影响。结果表明电子的离域使聚苯胺主链结构经质子酸掺杂后形成了共轭结构。常温下,通过聚苯胺的气敏性能测试,得知有机酸掺杂的聚苯胺的气敏性能更好,其中用磺基水杨酸掺杂的聚苯胺对1000ppm氨气的灵敏度最高,达到了14.8580,具有实际应用价值。     

注塑流动与传热分析的自适应隐式控制体积法

在注塑流动与传热分析中采用自适应隐式控制体积法,利用自动控制的参数识别方法来自动调节时间步长,在每个时间步长流动将向前推进大约半个单元大小的距离,厚度方向的温度采用契比雪夫配点法进行计算,压力方程的求解方法是预条件共轭梯度法。计算结果表明,自适应隐式控制体积法的时间复杂度是结点数目的平方,而且1h之内可以求解10000结点规模的问题。     

尖山铁矿破碎机硐室围岩位移反分析及稳定性评价

推导了非均匀应力场下硐室（或隧道）的位移反分析公式，并利用尖山铁矿破碎机硐室围岩位移监测结果反演了围岩的力学参数。计算了硐室周围应力并对其稳定性作了分析评价。