Fault detection for continuous‐time switched systems under asynchronous switching

In this paper, the problem of fault detection for continuous‐time switched systems under asynchronous switching is investigated. The designed fault detection filter is assumed to be asynchronous with the original systems. Attention is focused on designing a fault detection filter such that the estimation error between the residual and the fault is minimized in the sense of H _∞ norm. By employing piecewise Lyapunov function and average dwell time techniques, a sufficient condition for the existence of such a filter is exploited in terms of certain linear matrix inequalities. Finally, an example of a switched electrical circuit is provided to illustrate the effectiveness of the proposed approach. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation,characterization and in vitro drug release properties of polytrimethylene carbonate/polyadipic anhydride blend microspheres

Polyadipic anhydride (PAA), an aliphatic polyanhydride, and polytrimethylene carbonate (PTMC), an aliphatic polycarbonate, were synthesized via ring opening polymerization of oxepan‐2,7‐dione and melt‐condensation of trimethylene carbonate (1,3 dioxan‐2‐one), respectively. PTMC–PAA blend microspheres containing different ratios of buprenorphine HCl (2, 5, and 10%) were prepared by an oil‐in‐oil emulsion solvent removal method. Microspheres with different ratios of PTMC–PAA (85/15, 70/30, and 55/45) containing 5% buprenorphine HCl were prepared. Microspheres were spherical with visible cracks and pores on the surface. The average particle size of microspheres was around 200 μm for all microspheres. Drug loading efficiency of PTMC–PAA microspheres (85/15, 70/30, and 55/45) was 97.2, 95.2, and 70.2%, respectively. With the increase in the PTMC ratio, the melting point and the enthalpy of melting were both decreased. The mechanism for drug release from PTMC–PAA blend microspheres were generally a combination of drug diffusion through polymers and biodegradation of the polymers. In first three days, the release from microspheres followed zero order kinetics and was dependent on the PAA content. After three days the drug release from microspheres followed first order kinetics. In conclusion it was demonstrated that buprenorphine HCl release from microspheres could be successfully controlled by using different ratios of PTMC–PAA blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2377–2383, 2006     

A survey on video content rating: taxonomy,challenges and open issues

Multimedia Tools and Applications - Rating a video based on its content is one of the most important solutions to classify videos for audience age groups. In this regard, Film content rating and TV...     

A selective encryption for H.264/AVC videos based on scrambling

H.264/Advanced Video Coding (H.264/AVC) is one of the video compression standards that is 50% more efficient than previously introduced standards. Given that the H.264/AVC standard is considered and used in a variety of video applications, it is essential to provide a suitable solution for video encryption with good security, high encryption speed, and to prevent bitrate increases. In this paper, we propose a method selective encryption of H.264/AVC for the digital rights management (DRM) applications. In this method, discrete cosine transform (DCT) coefficients, which affect the texture and content of the H.264/AVC video during compression, are encrypted after the zigzag scanning and based on Context-Adaptive Binary Arithmetic Coding (CABAC). The experimental results and encryption efficiency analysis demonstrate that the proposed method with the format compliance has good security and high encryption speed and it can prevent the bitrate from rising and is thus usable in industrial and the DRM applications.

     

Estimation of impact forces during multi-point collisions involving small deformations

Multibody System Dynamics - Collision between hard objects causes abrupt changes in the velocities of the system, which are characterized by very large contact forces over very small time...     

Transforming Vulnerability Indexing for Saltwater Intrusion into Risk Indexing through a Fuzzy Catastrophe Scheme

Mapping vulnerability to Saltwater Intrusion (SWI) in coastal aquifers is studied in this paper using the GALDIT framework but with a novelty of transforming the concept of vulnerability indexing to risk indexing. GALDIT is the acronym of 6 data layers, which are put consensually together to invoke a sense of vulnerability to the intrusion of saltwater against aquifers with freshwater. It is a scoring system of prescribed rates to account for local variations; and prescribed weights to account for relative importance of each data layer but these suffer from subjectivity. Another novelty of the paper is to use fuzzy logic to learn rate values and catastrophe theory to learn weight values and these together are implemented as a scheme and hence Fuzzy-Catastrophe Scheme (FCS). The GALDIT data layers are divided into two groups of Passive Vulnerability Indices (PVI) and Active Vulnerability Indices (AVI), where their sum is Total Vulnerability Index (TVI) and equivalent to GALDIT. Two additional data layers (Pumping and Water table decline) are also introduced to serve as Risk Actuation Index (RAI). The product of TVI and RAI yields Risk Indices. The paper applies these new concepts to a study area, subject to groundwater decline and a possible saltwater intrusion problem. The results provide a proof-of-concept for PVI, AVI, RAI and RI by studying their correlation with groundwater quality samples using the fraction of saltwater (f_sea), Groundwater Quality Indices (GQI) and Piper diagram. Significant correlations between the appropriate values are found and these provide a new insight for the study area.

     

Mechanisms and conditions that affect phase inversion processes: A review

The phenomenon of phase inversion occurs in liquid‐liquid dispersions found in a variety of chemical engineering fields. From simple oil‐water mixtures to complex polymeric systems, the operating variables that affect this physical phenomenon are discussed in this work. The contribution on this matter by a large number of researchers is critically assessed, outlining both coherent and conflicting results. A detailed review of the mechanisms by which phase inversion takes place is also provided. While this subject has been studied for the past 50 years, this multivariate nonlinear process is not yet comprehensively understood, and this review article aims to describe the conclusions so far reached to provide insight for future research.     

Modulating drug release from poly(lactic-co-glycolic) acid microparticles by the addition of alginate and pectin

The aim of the present work is the characterization of PLGA microparticles including biopolymers for the controlled release of tilmicosin, a broad-spectrum antibiotic. Microparticles were prepared using the double-emulsion solvent evaporation technique. The effect of alginate and pectin incorporation over particle size and porosity, encapsulation efficiency (EE) and pH-responsive drug release was evaluated. Formulations presented a mean particle size of 5.5 μm approximately and a drug EE ranged from 22%–57%. PLGA-Alginate particles showed an increased porosity. Tilmicosin release profiles from PLGA and PLGA-biopolymer microparticles were affected by the particular combination of polymers and the pH of the release medium. The experimental data was simulated using a mathematical model, which takes into account the autocatalytic polymer degradation and the different mechanisms of drug transport. The combination of PLGA and biopolymers strongly influenced the morphology of the particles, offering the possibility of controlling the drug release profiles according to the therapy.     

A process model for robotic disc grinding

Automation of deburring and cleaning of castings is desirable for many reasons. The major reasons are dangerous working conditions, difficulties in finding workers for cleaning sections, and improved profitability. A suitable robot cell capable of using different tools, such as cup grinders, disc grinders and rotary files, is the solution. This robot should be completed with sensors in order to keep the quality of the cleaned surface at an acceptable level. Although using sensors simplifies both the programming and quality control there are still other problems that need to be solved. These involve selection of machining data, e.g. feeding rate and grinding force in a force controlled operation based on parameters such as tool type, disc grinder and geometry. In order to decrease the programming time, a process model for disc grinders has been developed. This article investigates this process model and pays attention to problems such as wavy or burned surfaces and the effect of a robot's repetition accuracy in the results obtained. Many aspects treated in this article are quite general, and can be applied in other types of grinding operations.     

An entropy-based persistence barcode

In persistent homology, the persistence barcode encodes pairs of simplices meaning birth and death of homology classes. Persistence barcodes depend on the ordering of the simplices (called a filter) of the given simplicial complex. In this paper, we define the notion of “minimal” barcodes in terms of entropy. Starting from a given filtration of a simplicial complex K, an algorithm for computing a “proper” filter (a total ordering of the simplices preserving the partial ordering imposed by the filtration as well as achieving a persistence barcode with small entropy) is detailed, by way of computation, and subsequent modification, of maximum matchings on subgraphs of the Hasse diagram associated to K. Examples demonstrating the utility of computing such a proper ordering on the simplices are given.