Transference and retrieval of voice message over low signal strength in satellite communication

This paper presents a method of transferring voice using short messaging service in satellite communication system. The method is especially applicable in a situation where signal strength is low and voice call is not possible. In a tunnel, basement or environment with bad climate conditions, signal strength usually gets weak which make voice call difficult but SMS works in such situation. An application has been developed using J2ME language in order to test the proposed method. For experimentation, Thuraya SG-2520 satellite phone has been used.     

An Insight View on Synthetic Protocol,Surface Activity,and Biological Aspects of Novel Biocompatible Quaternary Ammonium Cationic Gemini Surfactants

In this study, we prepared a novel series of diester-functionalized cationic gemini surfactants (C_m-E2O2-C_m) containing ethylene oxide as a spacer with varying alkyl chain lengths and characterized by ¹H NMR, FT-IR, elemental analysis, and ESI-MS. The physicochemical properties of the geminis were explored by tensiometry, fluorescence, dye solubilization, and Krafft point. These geminis acquire superior surface activity than the conventional surfactants. Fluorescence spectroscopy analysis affirmed that the micropolarity and aggregation number of micelles diminished with increase in the alkyl chain length. These geminis represent a new group of amphiphiles of considerably high biodegradability, better cleavability, and low toxicity as assessed by BOD test, FT-IR analysis, and HC₅₀ analysis, respectively. They also showed significant level of antimicrobial activity toward some specified bacterial strains of Gram-positive and Gram-negative by using agar well diffusion method. Furthermore, the thermogravimetric analysis provided information regarding thermal stabilities of the newly synthesized gemini surfactants.     

Cytological Observations and Bulked-Segregant Analysis Coupled Global Genome Sequencing Reveal Two Genes Associated with Pollen Fertility in Tetraploid Rice

Neo-tetraploid rice with high fertility is a useful germplasm for polyploid rice breeding, which was developed from the crossing of different autotetraploid rice lines. However, little information is available on the molecular mechanism underlying the fertility of neo-tetraploid rice. Here, two contrasting populations of tetraploid rice, including one with high fertility (hereafter referred to as JG) and another with low fertility (hereafter referred to as JD), were generated by crossing Huaduo 3 (H3), a high fertility neo-tetraploid rice that was developed by crossing Jackson-4x with 96025-4x, and Huajingxian74-4x (T452), a low fertility autotetraploid rice parent. Cytological, global genome sequencing-based bulked-segregant (BSA-seq) and CRISPR/Cas9 technology were employed to study the genes associated with pollen fertility in neo-tetraploid rice. The embryo sacs of JG and JD lines were normal; however, pollen fertility was low in JD, which led to scarce fertilization and low seed setting. Cytological observations displayed low pollen fertility (25.1%) and approximately 31.3 and 27.2% chromosome lagging at metaphase I and II, and 28.8 and 24.8% chromosome straggling at anaphase I and II in JD, respectively. BSA-seq of F_2–3 generations and RNA-seq of F₄ generation detected a common fragment, i.e., 18,915,234–19,500,000, at chromosome 7, which was comprised of 78 genes associated with fertility. Among 78 genes, 9 genes had been known to be involved in meiosis and pollen development. Two mutants ny1 (LOC_Os07g32406) and ny2 (LOC_Os07g32040) were generated by CRISPR/Cas9 knockout in neo-tetraploid rice, and which exhibited low pollen fertility and abnormal chromosome behavior. Our study revealed that two unknown genes, LOC_Os07g32406 (NY1) and LOC_Os07g32040 (NY2) play an important role in pollen development of neo-tetraploid rice and provides a new perspective about the genetic mechanisms of fertility in polyploid rice.     

Current Understandings on Magnesium Deficiency and Future Outlooks for Sustainable Agriculture

The productivity of agricultural produce is fairly dependent on the availability of nutrients and efficient use. Magnesium (Mg²⁺) is an essential macronutrient of living cells and is the second most prevalent free divalent cation in plants. Mg²⁺ plays a role in several physiological processes that support plant growth and development. However, it has been largely forgotten in fertilization management strategies to increase crop production, which leads to severe reductions in plant growth and yield. In this review, we discuss how the Mg²⁺ shortage induces several responses in plants at different levels: morphological, physiological, biochemical and molecular. Additionally, the Mg²⁺ uptake and transport mechanisms in different cellular organelles and the role of Mg²⁺ transporters in regulating Mg²⁺ homeostasis are also discussed. Overall, in this review, we critically summarize the available information about the responses of Mg deficiency on plant growth and development, which would facilitate plant scientists to create Mg²⁺-deficiency-resilient crops through agronomic and genetic biofortification.     

Sulfamic acid functionalized slag for effective removal of organic dye and toxic metal from the aqueous samples

Surface functionalization of blast furnace slag with sulfamic acid(a zwitterion) was performed for the removal of Cr~(3+) and methylene blue dye(MB) from water samples. The slag functionalization process was optimized using Response Surface Methodology Design. Statistical analysis of the parameters that include the sulfamic acid amount(A), reaction time(B), and temperature(C) revealed that(A) increase had a negative effect on the adsorption of both pollutants by the zwitterion slag, whereas(B) and(C)increase presented a positive impact. At the optimum condition of 2 g sulfamic acid amount, 50 min reaction time and 37 °C temperature, the prepared slag showed a removal efficiency of more than 90% for both Cr~(3+) and MB. Surface characterization by SEM/EDS, FTIR, XPS and surface area analyser, showed an improvement in surface properties and the incorporation of zwitterionic NH_2~+ and S@O groups of sulfamic acid. Adsorption isotherm and kinetic studies conducted with the zwitterion slag showed the adsorption process was suited to Freundlich isotherm model and pseudo-second-order kinetic model.The thermodynamic study conducted revealed the spontaneity of the process based on the calculated negative DG(Gibb's free energy) values. The prepared zwitterion slag offered easy regeneration with dilute HCl solution and showed a considerable removal(Cr3+: 65% and MB: 80%) for both pollutants even after 3 cycles of usage.     

Synthesis and characterization of caprolactone based polyurethane with degradable and antifouling performance

In this work,a degradable polyurethane composed of caprolactone(CL)and L-Lactide(LLA)as soft seg-ments,and 4,4'-methylenebis(cyclohexyl isocyanate)(H12MDI)and polytetramethylene ether glycol(PTMEG)as hard segments,was prepared.Hydrolytic degradation experiment revealed that the degrad-able polyurethane(PU)could be degraded in artificial seawater.It also showed that caprolactone-co-polyurethane(CL-PU)copolymer with higher crystallinity degraded much slower in artificial seawater.However,the introduction of LLA resulted in an increase in the hydrophilicity and reduction in the crys-tallinity of degradable PU,as demonstrated by the contact angle analysis.The result of the scanning elec-tron microscope showed that the surface of degradable PU renewed under static condition.Moreover,degradable PU was able to be used as a carrier,and it controlled the release rate of 4,5-dichloro-2-octyl-isothiazolone(DCOIT).The anti-diatom(Navicula incerta)test demonstrated that the(caprolactone-co-L-lactide)-co-polyurethane 4(CL/LAx-PU4)with DCOIT contents prevented the adhe-sion of diatom Navicula incerta(88.37％reduction)due to their self-polishing and the release of antifou-lants.Therefore,the degradable PU consisted of CL,LLA,and DCOIT could be a durable resin with good antifouling activity for the application in the marine anti-biofouling field.     

A panoramic view of Li7P3S11 solid electrolytes synthesis,structural aspects and practical challenges for all-solid-state lithium batteries

The development of an inorganic electrochemical stable solid-state electrolyte is essentially responsible for future state-of-the-art all-solid-state lithium batteries (ASSLBs). Because of their advantages in safety, working temperature, high energy density, and packaging, ASSLBs can develop an ideal energy storage system for modern electric vehicles (EVs). A solid electrolyte (SE) model must have an economical synthesis approach, exhibit electrochemical and chemical stability, high ionic conductivity, and low interfacial resistance. Owing to its highest conductivity of 17 mS·cm^-1, and deformability, the sulfide-based Li₇P₃S₁₁ solid electrolyte is a promising contender for the high-performance bulk type of ASSLBs. Herein, we present a current glimpse of the progress of synthetic procedures, structural aspects, and ionic conductivity improvement strategies. Structural elucidation and mechanistic approaches have been extensively discussed by using various characterization techniques. The chemical stability of Li₇P₃S₁₁ could be enhanced via oxide doping, and hard and soft acid/base (HSAB) concepts are also discussed. The issues to be undertaken for designing the ideal solid electrolytes, interfacial challenges, and high energy density have been discoursed. This review aims to provide a bird's eye view of the recent development of Li₇P₃S₁₁-based solid-state electrolyte applications and explore the strategies for designing new solid electrolytes with a target-oriented approach to enhance the efficiency of high energy density all-solid-state lithium batteries.     

Catalase (CAT) Gene Family in Rapeseed (Brassica napus L.): Genome-Wide Analysis,Identification, and Expression Pattern in Response to Multiple Hormones and Abiotic Stress Conditions

Catalase (CAT) is an antioxidant enzyme expressed by the CAT gene family and exists in almost all aerobic organisms. Environmental stresses induce the generation of reactive oxygen species (ROS) that eventually hinder plant growth and development. The CAT enzyme translates the hydrogen peroxide (H₂O₂) to water (H₂O) and reduce the ROS levels to shelter the cells’ death. So far, the CAT gene family has not been reported in rapeseed (Brassica napus L.). Therefore, a genome-wide comprehensive analysis was conducted to classify the CAT genes in the rapeseed genome. The current study identified 14 BnCAT genes in the rapeseed genome. Based on phylogenetic and synteny analysis, the BnCATs belong to four groups (Groups I–IV). A gene structure and conserved motif analysis showed that Group I, Group II, and Group IV possess almost the same intron/exon pattern, and an equal number of motifs, while Group III contains diverse structures and contain 15 motifs. By analyzing the cis-elements in the promoters, we identified five hormone-correlated responsive elements and four stress-related responsive elements. Further, six putative bna-miRNAs were also identified, targeting three genes (BnCAT4, BnCAT6, and BnCAT8). Gene ontology (GO) enrichment analysis showed that the BnCAT genes were largely related to cellular organelles, ROS response, stimulus response, stress response, and antioxidant enzymes. Almost 10 BnCAT genes showed higher expression levels in different tissues, i.e., root, leaf, stem, and silique. The expression analysis showed that BnCAT1–BnCAT3 and BnCAT11–BnCAT13 were significantly upregulated by cold, salinity, abscisic acid (ABA), and gibberellic acid (GA) treatment, but not by drought and methyl jasmonate (MeJA). Notably, most of the genes were upregulated by waterlogging stress, except BnCAT6, BnCAT9, and BnCAT10. Our results opened new windows for future investigations and provided insights into the CAT family genes in rapeseed.     

Computational-Driven Epitope Verification and Affinity Maturation of TLR4-Targeting Antibodies

Toll-like receptor (TLR) signaling plays a critical role in the induction and progression of autoimmune diseases such as rheumatoid arthritis, systemic lupus erythematous, experimental autoimmune encephalitis, type 1 diabetes mellitus and neurodegenerative diseases. Deciphering antigen recognition by antibodies provides insights and defines the mechanism of action into the progression of immune responses. Multiple strategies, including phage display and hybridoma technologies, have been used to enhance the affinity of antibodies for their respective epitopes. Here, we investigate the TLR4 antibody-binding epitope by computational-driven approach. We demonstrate that three important residues, i.e., Y328, N329, and K349 of TLR4 antibody binding epitope identified upon in silico mutagenesis, affect not only the interaction and binding affinity of antibody but also influence the structural integrity of TLR4. Furthermore, we predict a novel epitope at the TLR4-MD2 interface which can be targeted and explored for therapeutic antibodies and small molecules. This technique provides an in-depth insight into antibody–antigen interactions at the resolution and will be beneficial for the development of new monoclonal antibodies. Computational techniques, if coupled with experimental methods, will shorten the duration of rational design and development of antibody therapeutics.