紫色马铃薯酒发酵工艺优化及主发酵期花青素与色泽的动态变化

以紫色马铃薯为原料，在单因素的基础上，通过响应面法对紫色马铃薯酒的发酵工艺参数进行优化。最佳发酵工艺参数为:马铃薯与面粉比1:0.6、料水比1:1 (g/mL)、α-淀粉酶添加量8.5 U/g、酒曲添加量0.45%。此工艺在28 ℃下发酵14 d，得到的紫色马铃薯酒酒精度13.5%vol，花青素含量166.34 mg/mL，酒体澄清透明呈紫红色，酸甜适中，有独特酒香，综合感官评定得分90分。测定主发酵期花青素和色泽的动态变化，分析表明，紫色马铃薯酒在发酵过程中花青素呈现先上升后下降的趋势，色度呈现先下降后趋于平缓的趋势，色调则与之相反。聚合色度和褐变指数总体均呈现逐渐上升的趋势。试验结果为工业化生产紫色马铃薯酒提供理论依据。     

Evolution of Local Structural Ordering and Chemical Distribution upon Delithiation of a Rock Salt–Structured Li1.3Ta0.3Mn0.4O2 Cathode

Lithium‐rich disordered rock‐salt oxides have attracted great interest owing to their promising performance as Li‐ion battery cathodes. While experimental and theoretical efforts are critical in advancing this class of materials, a fundamental understanding of key property changes upon Li extraction is largely missing. In the present study, single‐crystal synthesis of a new disordered rock‐salt cathode material, Li_1.3Ta_0.3Mn_0.4O₂ (LTMO), and its use as a model compound to investigate Li concentration–driven evolution of local cationic ordering, charge compensation, and chemical distribution are reported. Through the combined use of 2D and 3D X‐ray nanotomography, it is shown that Li removal accompanied by oxygen oxidation is correlated with the development of morphological defects such as particle cracking. Chemical heterogeneity, quantified by subparticle level distribution of Mn valence state, is minimal during Mn redox, which drastically increases upon the formation of cracks during oxygen redox. Density functional theory and bond valence sum mismatch calculations reveal the presence of local short‐range ordering in the pristine oxide, which gradually disappears along with the extraction of Li. The study suggests that with cycling the transformation into true cation–disordered state can be expected, which likely impacts the voltage profile and obtainable energy density of the oxide cathodes.     

醇盐水解法制备亚微米球形氧化铝粉体

以仲丁醇铝为铝源,以乙腈与正丁醇作溶剂,通过醇盐水解法制备了亚微米球形氧化铝粉体.研究了溶剂配比、水加入量及煅烧温度对产物相结构及微观形貌的影响.结果表明,乙腈与正丁醇的体积比及去离子水的加入量是影响产物的成球性以及粒径大小的关键因素,随着乙腈与正丁醇体积比增大,产物成球性变好;去离子水加入量的变化,影响了产物粒径的大小.经不同温度煅烧后,产物发生了由γ-Al2O3转化为α-Al2O3的相变,但仍保持着球形形貌.     

350MW机组锅炉SCR脱硝系统优化

准东煤田是我国目前最大的整装煤田,但准东煤在锅炉燃烧过程中易发生结焦问题,一般掺烧高岭土缓解结焦。某燃用准东煤350 MW机组,锅炉燃煤掺烧高岭土后烟气携带灰尘颗粒及灰尘量增大,出现SCR脱硝系统烟道积灰严重和喷氨量明显偏大问题,同时在空气预热器形成硫酸氢氨堵塞,使机组不能长周期稳定运行。通过与国内同类型多台机组锅炉对比后发现,脱硝系统均存在易产生积灰的脱硝转向室、催化剂上方及空气预热器入口斜坡积灰状况等情况。针对存在的问题,通过建立改造前、后的模型计算分析,进行了导流板布置的优化设计、CFD流场分布、优化SCR系统导流板设计、声波与蒸汽吹灰器结合吹灰和氨注射栅格优化升级等工作,应用德图480风速仪实测风速试验,发现脱硝烟道原导流板设计不合理及施工安装偏差;原导流板水平段跨距大,支撑不足,造成导流板压塌变形,影响烟气流场分布;锅炉所烧煤质为高钠煤,为防止锅炉结焦掺烧高岭土后,增加了烟气飞灰颗粒及灰尘量,飞灰具有很大黏性,易沉积在烟道导流板及烟道壁面上。因此,提出对脱硝内部各处导流板进行优化改造,对脱硝系统烟道易产生积灰的部位增加声波吹灰器,对喷氨格栅喷嘴数量及氨空混合器升级,同时开展锅炉SCR脱硝喷氨热态优化调整试验工作。通过开展相关工作,SCR烟气系统的烟气流场相对标准偏差优化5%,相同负荷下液氨消耗量降低45%,彻底解决脱硝系统积灰和空气预热器堵塞问题,实现机组满负荷达标稳定运行。锅炉长期运行半年后停炉检查,发现前期脱硝系统烟道高达1 m的积灰部位彻底解决,催化剂表面干净无杂物,解决了脱硝系统积灰问题,同时配合提高空气预热器冷端综合温度的措施,彻底解决锅炉空气预热器堵塞问题。同时,经济效益显著,每年可以分别节约液氨费用70万元,节约风机电耗费用100万元,节约检修清理积灰及检修费用80万元,节约空气预热器冲洗治理费用20万元,综合节约费用270万元/a,达到预期效果实现机组长周期安全经济稳定运行。     

水泥厂堆取料机轨道梁设计优化及安装

正0前言近年来苏州中材建设有限公司承建了多条海外5 000 t/d水泥熟料生产线EPC总承包项目。原燃料堆场多采用圆型堆场或长型堆场,例如400 m长型辅助原料堆场有约1 600 m轨道梁、4 200多支螺栓,直径Φ90 m圆型堆场有约282 m轨道梁、1150支螺栓,合计共有约5 350多支螺栓需要安装,燃料为煤的生产线,工作量更是庞大。堆取料机轨道行程较长,对固定轨道螺栓的安     

锦纶长丝染色均匀度判色新方法

锦纶长丝的染色均匀度测试方法一直是采用人工判色方法,其判色结果会因人眼目光的不同导致经常会存在一定的误差,对企业节约成本和实际生产应用相当不利。本文提出了一种利用测试锦纶DTY长丝热收缩应力的方法,用热应力测试结果对锦纶染色性能进行预判,不需要进行织袜染色,为企业节约大量的人工成本。     

浅谈客运机车走行部风险调研及对策

针对机车走行部关键部位存在的风险及日常机车运用和检修存在的问题,进行了调查分析并提出预防对策,保证了机车走行部的运行安全。     

Visual Detection of Adenosine Triphosphate by Taylor Rising: A Simple Point-of-Care Testing Method Based on Rolling Circle Amplification

Rapid and sensitive point-of-care testing (POCT) is an extremely critical mission in practical applications, especially for rigorous military medicine, home health care, and in the third world. Here, we report a visual POCT method for adenosine triphosphate (ATP) detection based on Taylor rising in the corner of quadratic geometries between two rod surfaces. We discuss the principle of Taylor rising, demonstrating that it is significantly influenced by contact angle, surface tension, and density of the sample, which are controlled by ATP-dependent rolling circle amplification (RCA). In the presence of ATP, RCA reaction effectively suppresses Taylor-rising behavior, due to the increased contact angle, density, and decreased surface tension. Without addition of ATP, untriggered RCA reaction is favorable for Taylor rising, resulting in a significant height. With this proposed method, visual sensitive detection of ATP without the aid of other instruments is realized with only a 5 μL droplet, which has good selectivity and a low detection limit (17 nM). Importantly, this visual method provides a promising POCT tool for user-friendly molecular diagnostics.     

粘性条件下含不同导叶数的液力透平水力损失分析

为了研究粘性条件下含不同导叶数的液力透平内水力损失的分布情况,采用CFD方法以3种不同黏度工质对3种不同导叶数的泵作液力透平进行数值计算,分析工质黏度对含不同导叶数的液力透平水力损失分布的影响规律。结果表明:叶轮内的水力损失在透平总水力损失中所占比重超过50%,是透平内的主要水力损失;相同流量与工质下,叶轮内的水力损失随着导叶数的增加而减小,叶轮内的流动受导叶数影响显著,蜗壳、导叶等其他过流部分内的流动受导叶数影响较小;随着工质黏度的增加,相同导叶数透平各过流部分的水力损失基本呈增大趋势;在透平叶轮前添加合适叶片数的导叶能够改善叶轮内流动的状况,减小叶轮内水力损失。