Influence of fine ceramic aggregates on the residual properties of concrete subjected to elevated temperature

The residual properties of concrete subjected to elevated temperature are of importance to assess the stability of the structure. This paper investigates the performance of concrete containing white ware ceramic sand exposed to elevated temperature. Concrete mixes containing 0%, 50%, and 100% ceramic sand were prepared. The specimen were exposed to elevated temperatures of 200°C, 500°C, and 800°C for a duration of 60 minutes. Their residual mechanical properties (compressive strength, split tensile strength), ultra sonic pulse velocity, and mass change for different cooling regimes were investigated and compared among specimen. The results showed that incorporation of ceramic sand in concrete mixes improved the resistance against elevated temperature of hardened concrete.     

Novel anhydrous composite membranes based on sulfonated poly (ether ketone) and aprotic ionic liquids for high temperature polymer electrolyte membranes for fuel cell applications

Novel composite membranes were prepared using imidazolium type aprotic ionic liquids and sulfonated poly (ether ketone) (SPEK) as polymer matrix by solution casting process. All the prepared membranes were characterized for their thermal stability, mechanical properties, ion exchange capacity, proton conductivity and leaching out of ionic liquids in presence of water. Ionic liquid based membranes were more flexible than neat SPEK membrane due to the plasticization effect of ionic liquids. The interactions and compatibility occurring among components were investigated by vibration spectroscopy (FTIR ATR) and scanning electron microscopy respectively. The thermal stability of composite membranes was higher than unmodified membranes. The ion conductivity of composite membranes under anhydrous conditions was found to be dependent on temperature, type and concentration of ionic liquid in SPEK matrix. Ion conductivities of composite membranes under anhydrous condition were found to be up to two orders (∼100 times) higher than neat SPEK membrane and it was found to be ∼5 mS/cm at 140 °C for SPEK/OTf-70. These composite membranes can be successfully operated at temperatures ranging from 40 °C to 140 °C under anhydrous conditions.     

Minimising total cost with regular and emergency outsourcing sources: a neuro-dynamic programming approach

This study models and explains the business situation of an organisation which has regular and emergency outsourcing sources and where decisions have to be made at the beginning of every period regarding how much to order from these sources, so as to balance between different cost components of current and future periods. Previous works in this area have tried to attack this problem with dynamic programming. In this project, neuro-dynamic programming has been applied, and the reasons for doing so have been clearly stated. This model not only derives policies in order to minimise the expected total discounted cost over a period of time, but also enables the system to learn to make such decisions, and to improve its actions by using reinforcement learning. The performance of the present work has been measured quantitatively and has been compared with the models stated in literature. This study will be very useful for the organisations where such business problems exist or are likely to exist. This study will also be of great use to researchers, who are keen to understand and model the given business situation with distribution independent demand based models.     

Empirical analysis of anticipatory standardization processes: a case study

The processes followed for developing anticipatory standards such as those for web services are still not well-understood. In spite of the openness of the process, there are few analyses that shed light on the roles that different participants play or the actions they engage in during the development of these standards. We analyze archival documents that capture development of SOAP, a core web service standard. Our analysis shows that participants spend a bulk of their time discussing technical issues, identifying action items, and engaging in discussion to reach consensus. These activities reveal prototypical roles that participants take on such as: Advocate, Architect, Bystander, Critic, Facilitator, Guru, and Procrastinator. Together, the findings support the existence of three clusters in standards development processes: design activities performed by Architects, sense-making activities performed by Critics, and managerial activities performed by Facilitators; along with the important activity of coordinating the work of multiple participants. We discuss implications of our findings and identify opportunities for future work.     

Oxidation Kinetics of an Amorphous Silicon Carbonitride Ceramic

The oxidation kinetics of amorphous silicon carbonitride (SiCN) was measured at 1350°C in ambient air. Two types of specimens were studied: one in the form of thin disks, the other as a powder. Both specimens contained open nanoscale porosity. The disk specimens exhibited weight gain that saturated exponentially with time, analogous to the oxidation behavior of reaction-bonded Si₃N₄. The saturation value of the weight gain increased linearly with specimen volume, suggesting the nanoscale pore surfaces oxidized uniformly throughout the specimen. This interpretation was confirmed by high-resolution electron microscopy and secondary ion mass spectroscopy. Experiments with the powders (having a particle size much larger than the scale of the nanopores) were also consistent with measurements of the disks. However, the powder specimens, having a high surface-to-volume ratio, continued to show measurable weight gain due to oxidation of the exterior surface. The wide range of values for the surface-to-volume ratio, which included all specimens, permitted a separation of the rate of oxidation of the free surface and the oxidation of the internal surfaces of the nanopores. Surface oxidation data were used to obtain the rate constant for parabolic growth of the oxidation scale. The values for the rate constant obtained for SiCN lay at the lower end of the spectrum of oxidation rates reported in the literature for several Si₃N₄ and SiC materials. Convergence in the behavior of SiCN and CVD-SiC is ascribed to the purity of both materials. Conversely, it is proposed that the high rates of oxidation of sintered polycrystalline silicon carbides and nitrides, as well as the high degree of variability of these rates, might be related to the impurities introduced by the sintering aids.     

Phase Evolution,Magnetic, Optical,and Dielectric Properties of Zr‐Substituted Bi0.9Gd0.1FeO3 Multiferroics

Polycrystalline BiFeO₃ (BFO) and Bi_0.90Gd_0.10Fe_1?xZr_xO₃ (x = 0.0–0.10; BGFZ_x) ceramics were synthesized by solid‐state reaction method. Rietveld analysis of X‐ray diffraction patterns showed that BFO and BGFZ_x = 0.0 samples are stabilized in rhombohedral structure (space group R3c), whereas a small fraction of orthorhombic phase (space group Pn2₁a) is observed for BGFZ_{x = 0.03–0.10} samples. Suppression and disappearance of some Raman modes indicated a structural phase transition with addition of Zr dopant at Fe site. Magnetic measurements exhibited weak ferromagnetic behavior of BGFZ_x samples with increasing Zr⁺⁴ concentrations. The insertion of Gd⁺³ ions at Bi⁺³ sites and nonmagnetic Zr⁺⁴ ions at Fe⁺³ sites in Fe–O–Fe network suppressed the spin cycloid structure of BFO which in turn enhanced the magnetization of these ceramics. Electron spin resonance spectra revealed the breaking of spin cycloid of BFO due to the development of free spins with addition of Zr⁺⁴ dopants at Fe sites. UV–Visible diffuse reflectance spectra showed one d–d crystal field transition and two charge‐transfer (C–T) transitions along with a sharp absorption of light in visible region for all samples. Almost frequency‐independent dielectric constant and dielectric loss along with very low values of dielectric loss indicated greatly improved dielectric properties for BGFZ_{x = 0.03–0.10} samples.     

In the Hands of the People: Harnessing the Collective Power of Village Life in India

Top-down attempts by governments and charities to rebuild rural communities after natural disasters, or to rehabilitate slums, can leave communities feeling fractured. The Hunnarshala Foundation instead focuses on re-establishing social capital, providing funding and professional support for residents so that they can work together to improve their lot. This also reinforces the value of traditional artisans' knowledge in solving modern problems. Hunnarshala's Executive Vice Chairman Sandeep Virmani explains.     

Control of time-dependent effects in steel-concrete composite frames

Studies are presented for the control of time-dependent effects of creep and shrinkage in steel-concrete composite frames with pre-cast concrete slab for both shored and un-shored constructions. A developed hybrid procedure has been used for carrying out the studies. The procedure accounts for creep, shrinkage and progressive cracking in concrete slab panels. Two frames, a single storey and a five storey frame are considered. It is shown that, for both the types of constructions, shored and un-shored, the increase in bending moments and mid-span deflections can be controlled to a significant degree, without putting constraints on design parameters, by simply delaying the time of mobilization of composite action between the pre-cast concrete slab panels and the steel section. It is also found that though there is insignificant effect of type of construction on bending moments, the percentage change in mid-span deflection due to creep and shrinkage is significantly higher for shored construction.     

Whale Optimization Algorithm Approach for Performance Optimization of Novel Xmas Tree-Shaped FinFET

Silicon - Today, Fin shaped Field Effect Transistors (FinFETs) are the framework of the sub-nanometer technology node. The leading semiconductor industry deploys it in low-power (LP) and...     

Investigation of Subthreshold Characteristics of Negative Capacitance Single-Active Layer Double-Gate (NC-SALDG) Thin-Film Transistor (TFT)

Silicon - In this paper, for the first time, the performance evaluation of negative capacitance single-active layer double-gate (NC-SALDG) TFT is presented. In the proposed NC-SALDG TFT, amorphous...