Experimental analysis of particle deposition on single collectors

Experimental studies of particle deposition from liquid suspensions of monodispersed particles flowing past single spherical collectors were carried out and compared with theoretical results based on trajectory calculations. The experimental observations indicate the significant effect of particle flocculation and thus suggest the importance of sedimentation as a collection mechanism. The agreement between the theoretical results and the experimental data is good when the surface force interactions are favorable for collection. However, when the electrokinetic repulsion dominates in the neighborhood of the collector, the rate of collection drops rapidly, although not to zero as predicted by theory.     

影响裂解汽油二段加氢催化剂长周期运转因素及解决措施

从裂解汽油二段加氢催化剂性能、裂解汽油和操作条件等方面论述了影响该催化剂长周期运转的因素,并针对这些因素提出相应的措施,以达到延长催化剂运转周期的目的。     

基于FBG传感器网络的煤矿巷道在线监测系统设计

在掘进和采煤的过程中,巷道围岩的受力情况复杂多变,因此,巷道离层位移和围岩压力的实时监测是保证巷道正常工作的一个重要因素。设计了一种基于FBG传感器网络的煤矿巷道在线监测系统。该系统实现井下700 m数据采集,井上分析处理,可提供时序趋势变化、结构分布变化和阈值报警等功能。根据朱仙庄煤矿巷道的特点,系统安装4只FBG位移传感器、4只FBG土压力传感器和4只FBG温度传感器,对巷道掘进区域的离层位移、围岩压力和温度变化进行在线监测。监测结果表明:系统对离层位移、围岩压力和巷道温度变化反映灵敏,能够有效保证巷道掘进的正常进行,且为后续巷道施工提供数据支持和理论依据。     

S2/TDE85复合材料耐自然库存与加速湿热老化的性能研究

本文对高强2号玻璃纤维（S2）增强环氧（TDE85－MCD体系）基复合材料单向板经自然库存与加速湿热老化后力学性能的变化进行了研究。研究结果表明，温度和湿度的作用会使单向板的拉伸、弯曲、剪切性能有所降低；温度越高、湿度越大，力学性能变化越大；可用加速湿热试验值来表征自然库存条件下的试验值。     

Crosslinking of cotton cellulose in the presence of alkyl diallyl ammonium salts. I. Physical properties and agent distribution

We used three kinds of alkyl diallyl ammonium salts (methyl, ethyl, and propyl) in combination with dimethyloldihydroxyethyleneurea (DMDHEU) as crosslinking agents. The nitrogen content, dry crease recovery angle (DCRA), moisture regain, and wicking height for the DMDHEU/alkyl diallyl ammonium salts were in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇, but the wet crease recovery angle (WCRA) and tensile strength retention (TSR) were in the opposite order at the same resin concentration. For the same DCRA and TSR, the WCRA values for only DMDHEU were lower than those for DMDHEU/alkyl diallyl ammonium salts, and the WCRA values for DMDHEU/alkyl diallyl ammonium salts were in the order of ? C₃H₇ > ? C₂H₅ > ? CH₃. Both the ? OH group of the cellulose and DMDHEU could react with the vinyl or epoxy groups of the alkyl diallyl ammonium salts during the pad–dry–cure process. The surface migration for DMDHEU/alkyl diallyl ammonium salts was in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇. Fabrics treated with DMDHEU/alkyl diallyl ammonium salts showed good antibacterial properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1662–1669, 2003     

Miscibility, crystallization and morphologies of syndiotactic polystyrene blends with isotactic polystyrene and with atactic polystyrene

Two-component blends of differing polystyrene (PS), one syndiotactic (sPS) and the other isotactic (iPS) or atactic (aPS), were discussed. The phase behavior, crystallization and microstructure of binary polystyrene blends of sPS/iPS and sPS/aPS with a specific composition of 5/5 weight ratio were investigated using optical microscopy (OM), differential scanning calorimetry, wide-angle X-ray diffraction, scanning and transmission electron microscopy (SEM and TEM). Based on the kinetics of enthalpy recovery, complete miscibility was found for the sPS/aPS blends where a single recovery peak was obtained, whereas phase separation was concluded for the sPS/iPS blends due to the presence of an additional recovery shoulder indicating the heterogeneity in the molten state. These findings were consistent with OM and SEM observations; sPS/iPS exhibits the dual interconnectivity of phase-separated phases resulting from spinodal decomposition.Both iPS and aPS have the same influence on the sPS crystal structure, i.e., dominant β-form sPS and mixed α-/β-form sPS obtained for melt-crystallization at high and low temperatures respectively, but imperfect α-form sPS developed when cold-crystallized at 175 °C. Co-crystallization of iPS and sPS into the common lattice was not observed regardless the thermal treatments, either cold or melt crystallization. Due to its slow process, crystallization of iPS was found to commence always after the completion of sPS crystallization in one-step crystallization kinetics. Segregation of rejected iPS component during sPS crystallization was extensively observed from TEM and SEM images which showed iPS pockets located between sPS lamellar stacks within spherulites, leading to the interfibrillar segregation, which was similar with that observed in the sPS/aPS blends. The addition of iPS (or aPS) component will reduce the overall crystallization rate of the sPS component and the retardation of crystal growth rates can be simply accounted by a dilution effect, keeping the surface nucleation intact. The phase-separated structure in the sPS/iPS blend shows a negligible effect on sPS crystallization and the signature of phase separation disappears after sPS crystallization. Depending on the relative dimensions of the segregated domains and iPS lamellar nucleus, subsequent crystallization of iPS can proceed to result in a crystalline/crystalline blend, or be inhibited to give a crystalline/amorphous blend morphology similar with that of sPS/aPS blends.     

Physical properties of polycaproamide/cationic dyeable poly(ethylene terephthalate) polyblended fibers

Polycaproamide (PCA) and cationic dyeable poly(ethylene terephthalate) (CDP) polymers were blended mechanically (in ratios of 75/25, 50/50, and 25/75) in a melt twin‐screw extruder to prepare three PCA/CDP polyblended materials. The blends of PCA and CDP were spun into fibers. The molar ratio of dimethyl 5‐sulfoisophthalate sodium salt for CDP was 2%. This study investigated the physical properties of PCA/CDP polyblended fibers with nuclear magnetic resonance, gel permeation chromatography, gas chromatography, potentiometer, differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), extension stress–strain measurements, density gradient analysis, and rheometry. The experimental results of DSC proved that PCA and CDP formed an immiscible system. In an SEM image of a 50/50 PCA/CDP blend, the morphological aggregation of a larger size, from 3 to 5 μm in diameter, was observed. The rheological behavior of the PCA/CDP polyblended materials exhibited negative‐deviation blends, and the 50/50 blend of the PCA/CDP polyblended fibers showed a minimum tenacity value. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1710–1715, 2004     

Influence of initial chain conformation on the formation of mesoglobule phase in a dilute heteropolymer solution

We have observed, for the first time, that when the initial chain conformation changed from coil to globule, the association of linear poly(N-vinylcaprolactam-co-sodium acrylate) chains could gradually change from a reaction limited to diffusion limited process, reflected in a change of the fractal dimension of the resultant aggregates from ∼2.5 to ∼1.6. Such an influence of the initial chain conformation has been overlooked in past studies of the formation of the mesoglobule phase in a dilute heteropolymer solution.     

潮州公路两侧土壤铅含量及其分布规律研究

本文采用混合酸（HNO3：HCIO4=4：1）对潮州市区公路（东山路，清洁区）两侧的土壤进行处理，利用萃取分光光度法对土壤中的铅进行了测定，并分析了土壤铅污染程度和分布规律。结果表明：潮州市郊区公路两侧土壤中铅的含量比清洁区高1．25～1．90倍，并随距离增大，土壤铅含量逐渐降低。     

南阳直馏柴油碱洗乳化的原因及对策

分析了南阳石蜡精细化工厂直馏柴油碱洗乳化的原因，介绍了该厂直馏柴油碱洗抗乳化措施，这些措施包括：优化操作参数，加强生产管理，深度碱洗柴油轻组分然后轻、重组分混合出厂。这些措施的综合应用彻底解决了南阳石蜡精细化工厂直馏柴油碱洗乳化的问题，又保证了柴油收率。